|
Steve S wrote: Having a worker thread polling is not generally a good idea, but waiting on an event, on the other hand...
What I meant, which unfortunately was not very clear, was a special case for a worker thread that doesn't wait for anything. It has a specific task that consumes 100% of the thread time slices and the thread would terminate when the task has completed. If you need to cancel the task prematurely I think it would be suitable by polling (or rather checking) a flag. But of course, there's always the possibility for calling ::WaitForSingleObject() with the timeout value set to zero, but that feels like overkill.
I was hoping for the OP to post again allowing me to pick up the "thread". 
Steve S wrote: I inherited some code that polled, and because the person writing it was using a sleep inside the loop, they thought it would be OK. The thread was eating around 30% of the available CPU time while it waited, until I changed it to use an event, whereupon it "magically" dropped.
::Sleep() is one of the features that are so heavily abused and misused that I lack the words for it.
Every time anyone is trying to fix a threading issue by the use of ::Sleep() the code is almost certain to be wrong and even the design could be assumed to be erroneous.
If you haven't read Joe Newcomer's article about multithreading, which I included a link to in my previous post, have a go on it. It summarizes the common pitfalls quite clearly.
But, if I'm not mistaking, I think you already know...
Have a good one Steve
--
Roger
"It's supposed to be hard, otherwise anybody could do it!" - selfquote
|
|
|
|
|
CMyListCtrl derives from CListCtrl, when someone using CMyListCtrl, he may change it's styles using SetWindowLong or ModifyStyle,I can overwrite ModifyStyle, but for SetWindowLong, I have nothing to do!
thanks
|
|
|
|
|
eat_union wrote: I can overwrite ModifyStyle, but for SetWindowLong, I have nothing to do!
Try these events...
WM_STYLECHANGED, WM_STYLECHANGING.
|
|
|
|
|
thanks, I got it.
|
|
|
|
|
In Visual c++ 6.0 a helpful tool was class wizard. What does one use in VS 2005 c++ to use MFC classes
merlin Vilhauer
|
|
|
|
|
You mean to hook up events? They are on the properties tab.
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
You may want to have a look at this[^].
|
|
|
|
|
I am looking to write a server and a client app. I am not sure were to begin. I want to start with a chat service for windows that will connect using TCP/IP services. I am using MFC in Visual C++ 6.0. I have looked at some code on this site - but with no luck with them. I am trying to find a way to launch a server app and just connect with a client app on a network for starters.
also:
Not sure what would be best for this app-
WinSock clasess
WinInet classes
?? any other options?
??
Thanks in advance for any help.
|
|
|
|
|
|
Thank you,
This helped a lot!
|
|
|
|
|
Dosin wrote: This helped a lot!
Why don't you people vote?
Nobody can give you wiser advice than yourself. - Cicero
ப்ரம்மா
|
|
|
|
|
I ran into a bug in my app and eventually figured that it was a problem in the type casting. I wrote a short piece of code to confirm it.
float tempflt = 3.8;<br />
int tempint = (int)(tempflt*100);<br />
CString Debug;<br />
Debug.Format("%d, %f", tempint, tempflt);<br />
MessageBox(Debug);
Why is it that tempint becomes 379 and not 380?
|
|
|
|
|
A floating point value is never precise. Sorry, that's how it goes. Try including math.h and do this:
int tempint = (int )ceil(
tempflt*100);<br />
<br />
I think that's the right syntax, but the Math class has floor and ceiling methods, which round up and down. This will round your 379.xxx up to 380.00, then you cast it to int.<br />
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
Christian Graus wrote: A floating point value is never precise.
How predictable is a floats actual value? Because I don't think ceil will be a general solution. What about cases when I should be rounding down?
Is double more precise? I really don't need too much precision as far as decimal points goes. The range I will be in will be -32.768 to 32.767 (the range of short divided by 1000), so I only need 3 numbers after the decimal, which is why i chose float instead of double.
-- modified at 19:35 Tuesday 16th January, 2007
|
|
|
|
|
acerunner316 wrote: What about cases when I should be rounding down?
floor
acerunner316 wrote: Is double more precise?
Yes, but not exact.
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
Christian Graus wrote: acerunner316 wrote:
What about cases when I should be rounding down?
floor
That's my point. I need a generic code that will accept a float and multiply by 100 and get the right integer. Without knowing how float will skew the result of the multiply operation, I won't know when ot use ceil, and when to use floor.
|
|
|
|
|
you always would need ceil. Just like adding .5 assumes that you need to round up.
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
This is because the float (or double) to int cast performs a truncated conversion. The actual answer was probably more like 379.9999999999999999 but the truncation gives a result of 379.
If you want a rounded answer then do this :
int tempint = (int)( tempflt * 100 + 0.5 );
|
|
|
|
|
That's a good idea.  As long as the float math operations don't skew the answers by more than 0.5, which it doesn't seem like it will do.
|
|
|
|
|
They won't, that always guarentees you'll get what you want. ( I forgot that little trick )
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
The best method of making sure you get the correct value is to add 0.5 before casting.
|
|
|
|
|
Hi All,
I have a couple fo functions which are not behaving. IsInteractiveUser() always returns TRUE, even when one T/S's into a Server. The opposite is true for IsTerminalUser() - it always returns FALSE.
I know I am building the well known SIDs correctly: Interactive is S-1-5-4 (SECURITY_INTERACTIVE_RID), Terminal Server is S-1-5-13 (SECURITY_TERMINAL_SERVER_RID). Both are being contstructed using NT Authority S-1-5 (SECURITY_NT_AUTHORITY). See Well Known SIDs[^]
I've examined both TOKEN_USER and TOKEN_GROUPS from GetTokenInformation(). Is there another place which one should look? I can't imagine there is another authority which should be used.
Similar functions IsNTAuthority() (using SECURITY_LOCAL_SYSTEM_RID) and IsNTService() (using SECURITY_SERVICE_RID) work fine...
Any ideas?
Jeff
|
|
|
|
|
I am an experienced developer, but completely new to Windows MFC and Visual C++. One part of my application allows the user to edit a file that is displayed in hex - 16 bytes/line. A typical user interface for this sort of thing allows the user to select (left button down) and highlight the element to change in the view. The editing then occurs in place. I can handle the selection and highlight part of object selection using bounding rectangles, but I am struggling with the "edit" portion of the task. I am guessing that this is done with some sort of modeless dialogue, but I am really clueless. A code snippet would be great, but even a guideline about the general approach would be helpful.
Address | 0 | 1 | 2 | 3 | 4 ....... | E | F |
------- ---------------------------------------
0x0000 FF 2C 31 FF ............ FF
0x0010 A0 29 13 47 ............ 55
Thanks, Stan
|
|
|
|
|
Generally you create a textbox as a child control, position it over the label and make it visible. When focus leaves the textbox, or it gets an enter press, your code pulls out the value, uses it, and hides the control, which is generally a member variable.
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
Thanks - The textbox sounds like just the ticket.
I still have a few questions.
1) My work so far uses C++ MFC. Must I (should I?) use CLR to get the textbox functionality?
Stan
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
