Visual Basic

Dave Kreskowiak9-Jun-09 6:28

9-Jun-09 6:28

Are you changing the value in the project .config file, or are you changing the value by hand on the .config file in the bin\Release or bin\Debug folder, then you running your app?? If you're doing it by hand, every time you run your app from the debugger, it's copying the project .config file over the top of the one thats in the bin\Release or bin\Debug folder, overwriting the previous values.

A guide to posting questions on CodeProject[^]

Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007, 2008

WorkingAcc10-Jun-09 20:18

WorkingAcc

10-Jun-09 20:18

no, I know that it is created every time you run debug or rebuild it. In the settings in the project I have some default database value. And when I install (I am using advanced installer) I change the value in the [app name].exe.config file to something user selected during installation process. So when application is run at some computer (different than my developing) the value that application reads and shows in the textbox is still the default one, although if I look into the .config file that is in the same directory as exe the value is no longer default one, but the new one?!

I can't figure it out.

Thanks for help Dave

Regards,
Greg

Dave Kreskowiak11-Jun-09 1:44

11-Jun-09 1:44

Then there is something else going on in your code. The config files are always stored in the same directory as the .EXE, nowhere else.

A guide to posting questions on CodeProject[^]

Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007, 2008

How can I bring a rare picture format to a picture box?

WorkingAcc11-Jun-09 1:52

WorkingAcc

11-Jun-09 1:52

yup there is... I went trough once more, and deleted the config file (i changed the name of the variable in the settings, previously it was the same as the variable inside my code (databasepath), and I don't know if this was the problem but it is working now.
I can also now access the settings property like this: "databasepath = my.settings.datapath" but before I had to do it like this: "databasepath = my.settings.default.databasepath".

Is it possible that this was the problem, both my dim variable and a settings property had the same name?

Thanks,
anyhow its working now.

Regards,
Greg

Sonhospa9-Jun-09 2:16

Sonhospa

9-Jun-09 2:16

Hello everybody,

I'm trying to bring a dpx-format (bitmap spec http://www.fileformat.info/format/dpx/egff.htm) file into a picture box. Knowing its structure, I figured that I could use a MemoryStream starting at the offset where the genuine picture data start.

Here's what I try:

Private abyt() As Byte
Private fo As New OpenFileDialog

'Reading a picture and put it in a bytearray
If fo.ShowDialog = DialogResult.OK Then
    Dim fs As New IO.FileStream(fo.FileName, IO.FileMode.Open)
    Dim br As New IO.BinaryReader(fs, System.Text.UnicodeEncoding.BigEndianUnicode)
    Dim offset As Integer = 8192
    abyt = br.ReadBytes(CInt(fs.Length))
    br.Close()
    
    'Creating the memory stream for the picture box
    Dim ms As New IO.MemoryStream(abyt, offset, abyt.Length - offset)
    Me.PictureBox1.Image = Image.FromStream(ms)
End If

The last command throws an argument excecption "invalid parameter".

Could anyone more experienced please help?

Thank you,
Michael

Re: How can I bring a rare picture format to a picture box?

Nagy Vilmos9-Jun-09 2:29

Nagy Vilmos

9-Jun-09 2:29

Yoy are going to have to do the conversion yourself.

Panic, Chaos, Destruction.
My work here is done.

Re: How can I bring a rare picture format to a picture box?

Sonhospa9-Jun-09 3:03

Sonhospa

9-Jun-09 3:03

Ok you caused panic, chaos and destruction Laugh | :laugh:

But to be serious: How would I do the conversion??? Do you probably have any sources about the basics?

Michael

Re: How can I bring a rare picture format to a picture box?

Nagy Vilmos9-Jun-09 3:34

Nagy Vilmos

9-Jun-09 3:34

Okay you know the input format; I don't. I would have an external conversion routine that can create a new bitmap.

Is it feasable to convert the images up front that you want to use? There will probably be a 3rd party conversion on the web.
[added]
Isn't .dpx a movie format? That would mean you wish to ewither convert to say .avi or to convert frame by frame.

Panic, Chaos, Destruction.
My work here is done.

Re: How can I bring a rare picture format to a picture box?

Sonhospa9-Jun-09 5:08

Sonhospa

9-Jun-09 5:08

You're right, it's a movie format. The Windows-viewable pic I "only" nead for reference in a form where header details of each frame (i.e. frame by frame usage) are listed.

Just now I found an "ImageMagickObject", which knows the format and seems to do a good job on conversion. I guess that's the better way instead of trying to write my own converter (btw in my initial post I set a link to the dpx specification) without having any idea about the issue. The object seems to be a bit tricky to use in vb.net, so I'm struggling how to implement it.

Wish me luck Wink | ;)

and in case you have some hints for me I'd appreciate any...

Thanks
Michael

Find URL's of Mozila Firefox,Opera or etc

Anubhava Dimri9-Jun-09 2:11

Anubhava Dimri

9-Jun-09 2:11

Hi All,
I am tracking Visited URL's Name by using FindFirstUrlCacheGroup or etc function. But it Track only Internet Explorer.

So please give me any solution for tracking Mozila firefox,opera or etc.
Because Proxy server is work like that.

Thanks

If you can think then I Can.

Re: Find URL's of Mozila Firefox,Opera or etc

Dave Kreskowiak9-Jun-09 6:24

Combobox SelectedIndexChanged Infinite Loop

9-Jun-09 6:24

Proxy servers do NOT work like that. Proxy servers work because the browser tells the proxy which URL to retrieve. Then the proxy goes and gets the page and relays it back to the browser. There is no function you can call on the workstation that will tell you what the URL being retrieved of any browser installed on the workstation. You have to use, or write your own, proxy server to do that.

A guide to posting questions on CodeProject[^]

Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007, 2008

Hypermommy9-Jun-09 2:09

Hypermommy

9-Jun-09 2:09

I have a combobox on my form called cboLang. When the selectedindexchanged fires I run a routine that goes out to the database and changes the labels to the language requested. Then it loads up the combobox with that language's form of the name of each possible language (i.e., if the user selected French it would put "Anglais" in the combobox instead of "English").

What I'd like to do next is ensure that the language the user selected is the one selected in the combobox. However, whenever I do this it fires the selectedindexchanged event again which starts everything all over and it gets into an infinite loop.

How can I set the selected item without it firing the selectedindexchanged event?

Denise "Hypermommy" Duggan

Tom Deketelaere9-Jun-09 2:22

Tom Deketelaere

9-Jun-09 2:22

2 possible solutions that I see:
0) Don't do the code that changes everything in the 'selectedindexchanged' event.
Do it in a 'Save settings' button or so.

1) Maintain a boolean variable 'ImWorking' (dummy name Smile | :)

) (on form level). While your code is running change this boolean to 'True'. First thing in your 'selectedindexchanged' event is check this boolean. If the boolean is true than exit the event (exit sub)

My choice would be first one.
This allows for the user to misclick without having to wait for the language change to have ran its course.

binjafar9-Jun-09 2:25

binjafar

9-Jun-09 2:25

You have possibly two ways to do this...

1. use SelectionChangeComitted event (recommended)

2. use some global variable Flag that u set to 'true' once all the comboBox is filled up... before comboBox is completely filled..this flag should remain 'false'... later on in ur code... just check if the flag is set to 'true' before doing what ever u do upon item selection.

Enjoy!

Hypermommy9-Jun-09 5:14

Hypermommy

9-Jun-09 5:14

SelectionChangeCommitted was exactly what I need!! Thanks!!!!! Never even knew that it existed but it's just what I needed.

Denise "Hypermommy" Duggan

binjafar9-Jun-09 8:14

binjafar

9-Jun-09 8:14

Enjoy!

How to check Application is run by Administrator

Henry Minute9-Jun-09 8:25

Henry Minute

9-Jun-09 8:25

An excellent solution. I too was unaware of this event. Thumbs Up | :thumbsup:

Henry Minute

Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”

Anubhava Dimri9-Jun-09 2:05

Anubhava Dimri

9-Jun-09 2:05

Hi All,
I have two application.First one is Used for Calling Second Application. Second runs alwase with Admin Rights.

When I am trying to start process of Second Application then it reqire admin rights with Passord and Cancel Button.

Then How to check it in first application The second application is run by Admin rights or not.

Thanks

If you can think then I Can.

Re: How to check Application is run by Administrator

Eddy Vluggen9-Jun-09 7:05

Eddy Vluggen

9-Jun-09 7:05

From MSDN[^];

// Get the role using the WindowsBuiltInRole enumeration value.
Console.WriteLine("{0}? {1}.", WindowsBuiltInRole.Administrator,
   myPrincipal.IsInRole(WindowsBuiltInRole.Administrator));

I are troll Smile | :)

Impossible to access to the properties of Usercontrol, since a HTML page with javascript [modified]

tdc_david9-Jun-09 1:25

tdc_david

9-Jun-09 1:25

Hi,first say that if the place for this post isn't correct, sorry but I don't if the correct place is within Java,Vb o Winform xD

Create a usercontrol with a single textbox and one property that set the textbox and get the value of the textbox. This usercontrol is embedded in HTML page. I can change the value of the textbox perfectly but isn't possible access to usercontrol with javascript.

When I create the instance to the usercontrol can get access but out the object tag is impossible .... my code is this ...

VB CODE:
<pre>
Public Class SerialPort

      Inherits System.Windows.Forms.UserControl

      Public Property Age() As String

            Get

                  Return Me.Age.Text

            End Get

            Set(ByVal Value As String)

                  Me.Age.Text = Value

            End Set

      End Property

End Class
</pre>

HTML CODE:
<pre>
<html>
<body>
<form name="form1">
<object id="SerialPort" classid="UserSerialPort.dll#UserSerialPort.SerialPort" height="399" width="651">
<param name="age" value="48">
</object>
</body>
<br/>
<input type="button" name="btage" value="Age" onClick="getage();">
script language="javascript">

     var objserial;

     objserial = document.getElementById("Serialport");

     function getage()
     {
          var quedevuelve;
          quedevuelve = objserial.age;
          alert(quedevuelve);

     }
</script>
</form>
</html>
</pre>

The first part, work correctly, send the value "age" with value 48 and this is reflected in the usercontrol, but the next call to function javascript return undefined, I haven't found any solution for it ...

If anyone can help I would greatly appreciate it, a greeting.

modified on Tuesday, June 9, 2009 7:35 AM

Re: Impossible to access to the properties of Usercontrol, since a HTML page with javascript

Christian Graus9-Jun-09 1:53

Christian Graus

9-Jun-09 1:53

tdc_david wrote:
Hi,first say that if the place for this post isn't correct, sorry but I don't if the correct place is within Java,Vb o Winform xD

um.... ASP.NET forum ?

Christian Graus

Driven to the arms of OSX by Vista.

"! i don't exactly like or do programming and it only gives me a headache." - spotted in VB forums.

I can do things with my brain that I can't even google. I can flex the front part of my brain instantly anytime I want. It can be exhausting and it even causes me vision problems for some reason. - CaptainSeeSharp

Re: Impossible to access to the properties of Usercontrol, since a HTML page with javascript

tdc_david9-Jun-09 2:14

tdc_david

9-Jun-09 2:14

ASP.NET no, because the page is only HTML with javascript....

Re: Impossible to access to the properties of Usercontrol, since a HTML page with javascript

Dave Kreskowiak9-Jun-09 3:15

Re: Impossible to access to the properties of Usercontrol, since a HTML page with javascript

9-Jun-09 3:15

So that makes you ask in the VB.NET forum??

A guide to posting questions on CodeProject[^]

Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007, 2008

tdc_david9-Jun-09 4:18

tdc_david

9-Jun-09 4:18

Because my code had two parts, the first is in vb.net and second is html/javascript.

I would appreciate that instead of questioning the place of the wire we can concentrate more on the problem ... Thanks.

Re: Impossible to access to the properties of Usercontrol, since a HTML page with javascript

Dave Kreskowiak9-Jun-09 6:22