System Admin

FirstPrevNext

Re: Windows XP and Ctrl+Alt+Del at Logon Michael Martin31-Dec-03 13:41 Michael Martin 31-Dec-03 13:41  Sebastian, thanks very much for your response. I found the area you were talking about and and have made the change but will have to wait a few hours before I can reboot the machine to test it as I am in the middle of a large download. I will list the steps I took below to help any other people using the English version of Windows XP find their way through. Go to Control Panel Double Click Administrative Tools Double Click Local Security Policy Click the + next to Local Policies Click Security Options Double Click Interactive logon:Do not require CTRL+ALT+DEL Click Disabled Click Apply Click OK Michael Martin Australia "I suspect I will be impressed though, I am easy." - Paul Watson 21/09/2003 Re: Windows XP and Ctrl+Alt+Del at Logon Roger Wright31-Dec-03 13:57 Roger Wright 31-Dec-03 13:57  That looks like it should do the trick. Local and Global Policies are areas where I rarely tread; I'd never think to look there! Happy New Year, btw! "Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A. Re: Windows XP and Ctrl+Alt+Del at Logon Michael Martin31-Dec-03 21:21 Michael Martin 31-Dec-03 21:21  Roger Wright wrote: That looks like it should do the trick. Local and Global Policies are areas where I rarely tread; I'd never think to look there! Happy to report it did do the trick. Roger Wright wrote: Happy New Year, btw! Thanks, same to you, as by my piss poor calculations it should be about 1:25AM over there about now. Michael Martin Australia "I suspect I will be impressed though, I am easy." - Paul Watson 21/09/2003 Re: Windows XP and Ctrl+Alt+Del at Logon Sebastián Benítez1-Jan-04 11:57 Sebastián Benítez 1-Jan-04 11:57  You can learn much just touching here and there "semper aliquid haeret", Bacon. -- Sebastián. Re: Windows XP and Ctrl+Alt+Del at Logon Matt Newman1-Jan-04 18:46 Matt Newman 1-Jan-04 18:46  There is an easy way. I am on a domain so I can't give you the exact wording, but under User Accounts there should be something about changing the way users log on and off. Its the same place you enable/disable fast user switching. Matt Newman If you chose to continue this discussion, I am fully prepared to make you my bitch. I invite you to ask around, and you'll find out that I'm quite capable of doing so - John Simmons on Trolls Re: Windows XP and Ctrl+Alt+Del at Logon Michael Martin2-Jan-04 0:34 Michael Martin 2-Jan-04 0:34  Matt Newman wrote: There is an easy way. I am on a domain so I can't give you the exact wording, but under User Accounts there should be something about changing the way users log on and off. Its the same place you enable/disable fast user switching. Thanks Matt, that's the same one I'm talking about when I see the Use the Welcome screen option. The couple of times I have gotten to setup on a computer on a domain it was probabaly one that had a global policy in effect that required the use of Ctrl+Alt+Del. Which is why I never saw the option and didn't know where to find it. From what I have seen so far Sebastian's way seems to be the only one. Michael Martin Australia "I suspect I will be impressed though, I am easy." - Paul Watson 21/09/2003 Re: Windows XP and Ctrl+Alt+Del at Logon Matt Newman2-Jan-04 6:12 Matt Newman 2-Jan-04 6:12  Actually a domain computer can't use the welcome screen by adding it to a domain it is automatically turned off. Matt Newman If you chose to continue this discussion, I am fully prepared to make you my bitch. I invite you to ask around, and you'll find out that I'm quite capable of doing so - John Simmons on Trolls Re: Windows XP and Ctrl+Alt+Del at Logon Anonymous9-Jan-04 17:01 Anonymous 9-Jan-04 17:01  Can't do it...you need to be part of a domain to get the Ctrl+Alt+Del window to appear. Re: Windows XP and Ctrl+Alt+Del at Logon Michael Martin10-Jan-04 13:01 Michael Martin 10-Jan-04 13:01  Anonymous wrote: Can't do it...you need to be part of a domain to get the Ctrl+Alt+Del window to appear. Not true, have a look at the Sebastian Benitez reply, he told me how to do it. Michael Martin Australia "I suspect I will be impressed though, I am easy." - Paul Watson 21/09/2003 Is it my IIS or my ASP.Net,,,f1,f1,f1,,, Het210930-Dec-03 0:12 Het2109 30-Dec-03 0:12  hi, I installed .net on Windows 2000 Server. While Installing i checked that all the options are ticked. but still I am getting this error : Error while trying to run project: Unable to start debugging on the web server. Server side-error occurred on sending debug HTTP request. Make sure the server is operating correctly. Verify there are no syntax errors in web.config by doing a Debug.Start Without Debugging. You may also want to refer to the ASP.NET and ATL Server debugging topic in the online documentaion. Would you like to disable future attempts to debug ASP.NET pages for this project? Can anyone help me out. Be Humble in Victory and Strong in Defeat. -Het Re: Is it my IIS or my ASP.Net,,,f1,f1,f1,,, Roger Wright30-Dec-03 15:43 Roger Wright 30-Dec-03 15:43  Posting the same question three times will not get you any faster response, nor win any friends here. Don't do it. Debugging has to be specifically enabled in IIS5.0 - it isn't set up to allow it by default. In IIS Manager (Administrative tools) select the website you want to debug, right-click, and open the Properties dialog. Select the Home Directory tab, then the Configuration button near the bottom. Select the checkbox to enable Server-side script debugging and/or client-side script debugging. This is the basic debugging setting for ASP, and as far as I know, it also affects ASP.Net projects. Before you finish the project, remove the checkmarks, as debugging mode forces IIS to run in single-threaded mode, and will badly affect performance on a production site. Hope this helps some... "Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A. Re: Is it my IIS or my ASP.Net,,,f1,f1,f1,,, Het210930-Dec-03 17:09 Het2109 30-Dec-03 17:09  Thanx Roger, but i have tried all settings possible in IIS, last thing possible was to format the PC and install new instance of OS and .NET did that also. but its not working. You are right by the way that posting the same question 3 times wont fetch me faster response or friends, sorry for that but i am stuck at this place since around a week now and am not able to find way out. sorry again. As far as ur resoponse is concerned i did that when got that problem first time only, but its still giving me same error. Would be really thankful if you can help me out, Thanks Be Humble in Victory and Strong in Defeat. -Het Re: Is it my IIS or my ASP.Net,,,f1,f1,f1,,, Roger Wright30-Dec-03 20:21 Roger Wright 30-Dec-03 20:21  I don't know that I can help you... I installed the .Net Framework 1.1 on my Win2K Server and never encountered this error. You might find some better sources in the ASP.Net Forum; try searching it for some clues that resemble what you're seeing. Good luck - I know how frustrating it can be to hit a wall with this stuff. "Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A. Thanx Roger Het210930-Dec-03 22:26 Het2109 30-Dec-03 22:26  Thanks Roger for your reply will let u know whenever i come to know the error so that u can help anyone else in future if u come across person with such error, Happy New Year Be Humble in Victory and Strong in Defeat. -Het IIS Debuging not Working...f1,f1,f1,,, Het210930-Dec-03 0:10 Het2109 30-Dec-03 0:10  hi, I installed .net on Windows 2000 Server. While Installing i checked that all the options are ticked. but still I am getting this error : Error while trying to run project: Unable to start debugging on the web server. Server side-error occurred on sending debug HTTP request. Make sure the server is operating correctly. Verify there are no syntax errors in web.config by doing a Debug.Start Without Debugging. You may also want to refer to the ASP.NET and ATL Server debugging topic in the online documentaion. Would you like to disable future attempts to debug ASP.NET pages for this project? Can anyone help me out. Be Humble in Victory and Strong in Defeat. -Het IIS Cannot Debugg ASP.Net Application...F1,F1,F1... Het210929-Dec-03 22:19 Het2109 29-Dec-03 22:19  hi, I installed .net on Windows 2000 Server. While Installing i checked that all the options are ticked. but still I am getting this error : Error while trying to run project: Unable to start debugging on the web server. Server side-error occurred on sending debug HTTP request. Make sure the server is operating correctly. Verify there are no syntax errors in web.config by doing a Debug.Start Without Debugging. You may also want to refer to the ASP.NET and ATL Server debugging topic in the online documentaion. Would you like to disable future attempts to debug ASP.NET pages for this project? Can anyone help me out. Be Humble in Victory and Strong in Defeat. IIS Debugging problem Tasnim29-Dec-03 22:02 Tasnim 29-Dec-03 22:02  hi, I installed .net on Windows 2000 Server. While Installing i checked that all the options are ticked. but still I am getting this error : Error while trying to run project: Unable to start debugging on the web server. Server side-error occurred on sending debug HTTP request. Make sure the server is operating correctly. Verify there are no syntax errors in web.config by doing a Debug.Start Without Debugging. You may also want to refer to the ASP.NET and ATL Server debugging topic in the online documentaion. Would you like to disable future attempts to debug ASP.NET pages for this project? Can anyone help me out. Het If you have no Conflicts you have got tremendous Energy. ---Het Sharing Folders across networks Kevnar29-Dec-03 19:21 Kevnar 29-Dec-03 19:21  My brother and I were trying to share one of my WinXP folders over the internet. Can it be done? I have it set up as a shared folder. How does he access it from his PC, to download my files and etc. Is there a direct way, or do we need an FTP client? Please help. "Go to, I’ll no more on’t; it hath made me mad." - Hamlet Re: Sharing Folders across networks Roger Wright29-Dec-03 21:53 Roger Wright 29-Dec-03 21:53  Interesting thought... I've never tried it. At a minimum you'd have to know each other's IP address, and he would need an account on your computer. You could stick the folder in IIS and let him access it that way, but making the actual connection is something I haven't tried in XP. A few years ago I had no trouble connecting to and using the server at work from home, but then I had a valid logon, and I don't recall the details of how I did it. Open up My Network Places, click the Add wizard and see what happens. Perhaps a combination of IP address and share name will be enough to make the link. "Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A. SNMP Server Question Roger Wright29-Dec-03 15:53 Roger Wright 29-Dec-03 15:53  I've just received a message telling me that a computer at 10.2.x.x is trying to contact the SNMP Server here, and I can't imagine why. That's not even supposed to be a routable IP address, so it must be on the local net here in town. What in the world does the SNMP Server do that might interest a hacker? Is there any good reason to run it at all? I've blocked it with a firewall and nothing has broken yet. I realize that it's used for managing remote computers, but I haven't found a lot of info about just what it does and how it works. What kind of risk does it present? [EDIT] The plot thickens - the remote MAC address is the one on my ISP's gateway server, but the IP address associated with it is no longer correct. ARP reports the correct IP address for that MAC address, but the packets coming in are tagged with the 10.2.x.x IP. How entertaining! [/EDIT] "Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A. Re: SNMP Server Question Sebastián Benítez31-Dec-03 3:15 Sebastián Benítez 31-Dec-03 3:15  SNMP is Simple Network Management Protocol. You use it to manage networks I haven't used it, but many routers use it to allow configuring them remotely. You should activate only services you use, if you don't use it, remove it. You could try shutting it down and whatching if the network still works. If someone complains, it's your problem "semper aliquid haeret", Bacon. -- Sebastián. Re: SNMP Server Question rt017-Jan-04 0:00 rt01 7-Jan-04 0:00  The information about the commputer like sysadmin / location / performace data etc. might be interesting, depending on your config you can completly manage you computer with snmp eg. shutdown start stop services apply new firewall rules ..... For some information take a look into http://www.ietf.org/rfc/rfc1157.txt or http://www.openview.hp.com/ if does not need this service deinstall it, if you have products like HP OpenView or IBM Tivoli you will need this regards Patrick making nightly backups of a samba server keegan29-Dec-03 10:01 keegan 29-Dec-03 10:01  Does anyone here use any external utility to backup in linux? My boss wanted me to explore around with samba and linux to see how easy it would be to set up a file server with domain logons, and i've got that down pretty good. However, i've been googling, and the best i can find is to either manually do it with a tar command every time i wanna do it, or use AMANDA. I just want to backup user directories (everything in /home). Whats the best way to do this? *.* cin >> knowledge; Re: making nightly backups of a samba server Sebastián Benítez29-Dec-03 10:26 Sebastián Benítez 29-Dec-03 10:26  You can make your own script with bash and tar + gzip and then "cron" or "at" it. "semper aliquid haeret", Bacon. -- Sebastián. Re: making nightly backups of a samba server keegan29-Dec-03 10:48 keegan 29-Dec-03 10:48  i already did that, but my c++ knowledge of linux time isn't good enough. I'd have to make a program that checks the time every so often and runs the tar command if the time is correct. but i don't really want that, it seems it would be a resource hog. *.* cin >> knowledge;

Last Visit: 31-Dec-99 18:00     Last Update: 9-Jun-24 6:06 Refresh ᐊ Prev1...386387388389390391392393394395 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.