|
Abhinav S wrote: a lot of hype
Never heard of him 
|
|
|
|
|
And I thought they do Mikado 
modified 19-Jan-21 21:04pm.
|
|
|
|
|
Hi All,
I am trying to get a Win 7 box on the wireless network at my paraents, following Griffs advice I went to a local Computer Shop & bought an 802.11 adaptor. Got it home booted the Win 7 and opened the pack and had the revelation that these days you get the device some badly translated instructions with details of where to download the driver. Okay I am using my Win 10 box to type this but imagine the issues caused by buying the adaptor and not having a access to the driver. Come on! a cheap CD or even the relevant files on the device as a small read flash memory (it's not hard I have designed a device that does that!) 
|
|
|
|
|
I know what you mean.
You'd have thought that for something that allow you to connect to the internet, they'd provide a driver rather than expecting you to connect to the internet (presumably with the device) first... 
It's like when I worked for a VDT manufacturer - they weighed a ton! So for Health and Safety (this was in the eighties, you understand) they added a pamphlet of "how to unpack it" instructions.
First thing that went in the box - the instructions. On top of that was a huge lump of metal and glass, then the (all metal) keyboard, ...
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
There seems to be a problem with your internet connection.
Recommended steps:
Find a possible solution online.
|
|
|
|
|
Pleaase don't make jokes like than, I am sure that it exists... 
|
|
|
|
|
I believe that's what Microsoft wants you to do in such a situation
You get this nice button "find help online" 
|
|
|
|
|
At least the sneaker-net of today is much better than just days past when files bigger than 1.4MB (or so since you could never really use all of it!) required special handling...remember filesplitter? Good luck!
"Go forth into the source" - Neal Morse
|
|
|
|
|
Too Blo*dy True! Did any have any success with file splitters?
|
|
|
|
|
Most curious, I upgraded VS 2015 with a variety of new tools; now it's slowed down to a crawl; that's not so unexpected. I'll remove the new tools one-by-one, and see if/when I get a speed-bump.
Meanwhile, back in VS 2013, a (WinForm) project (created in VS 2013) refuses to respond to keyboard input (when open for editing). Closing, re-opening, VS 2013; re-booting the computer : no change. Yep, other projects opened in 2013 show no problem getting keyboard input.
And, same project opens in VS 2015, and, no problem with editing.
But, in VS 2015, with all these incredible tools installed (including ReSharper), I add some entries to a big Dictionary of Type <Enum,Action> ... and I get a run-time error that I gotta duplicate key being added.
So, that's no real surprise, I was working fast, and copying existing key-value pairs with their Enum value keys and lambdas for the Action, and pasting them, and modifying them to add additional "features."
But, what is surprising ... disturbing even ... is that the the run-time error report doesn't tell me which key I am trying to enter twice. I keep thinking something is wrong, wrong, wrong with that.
time for a break: these horses are getting too sweaty ...
cheers, Bill
«In art as in science there is no delight without the detail ... Let me repeat that unless these are thoroughly understood and remembered, all “general ideas” (so easily acquired, so profitably resold) must necessarily remain but worn passports allowing their bearers short cuts from one area of ignorance to another.» Vladimir Nabokov, commentary on translation of “Eugene Onegin.”
|
|
|
|
|
I recently installed the free Community Edition of VS2015. I like it, but it loads projects at about half the speed of VS2012 Pro. I had to buy the Pro edition in 2012 because, unlike the 2015 Community Edition, the free versions of 2012 did not accept any plug-ins (like Wix). I now have both versions running on my machine, but the NuGet tool does not work at all with the older 2012 version. I do not know what broke NuGet. Maybe it was the installation of the 2015 edition, or maybe 2012 has incompatibilities with Windows 10. I upgraded to 10 just before I installed VS2015, so now I don't know which of the two installs broke 2012.
Get me coffee and no one gets hurt!
|
|
|
|
|
Hi Cornelius,
Turns out the main component of the delay with VS 2015 was my having turned on all the static checking options with MS DataContracts. I'm still running Win 8.1, and have no intention to go to Win 10 until it has been de-wormed, and muzzled.
cheers, Bill
«In art as in science there is no delight without the detail ... Let me repeat that unless these are thoroughly understood and remembered, all “general ideas” (so easily acquired, so profitably resold) must necessarily remain but worn passports allowing their bearers short cuts from one area of ignorance to another.» Vladimir Nabokov, commentary on translation of “Eugene Onegin.”
|
|
|
|
|
Thanks Bill,
Fortunately VS2012's NuGet not working is not a serious issue for me. I now do all my work on VS2015 and only use 2012 to open another project, if I want to copy and paste code from it. Yes, 2015 loads projects slightly slower, but not to the extent that it bothers me.
I have been working on Windows 10 for a while now, and have so far only noticed one very weird issue:
I have WinZip version 16 that I have bought years ago, to zip some backups from time to time. When I run that under 10, Windows resets some of my default programs to whatever it favors. Specifically, the default programs for PNG, JPG and HTM files are reset to Win 10's internal apps. WinZip works just fine, but I have to reset those defaults every time I used it. Curiouser and curiouser!
Get me coffee and no one gets hurt!
modified 28-Feb-16 10:05am.
|
|
|
|
|
BillWoodruff wrote: Meanwhile, back in VS 2013, a (WinForm) project (created in VS 2013) refuses to respond to keyboard input (when open for editing). Closing, re-opening, VS 2013; re-booting the computer : no change. Yep, other projects opened in 2013 show no problem getting keyboard input.
Been there, seen it. In my case it was the Resharper plugin blocking something. This[^] post on SO helped me out, might be a solution for you too.
|
|
|
|
|
Marco,
Thanks ! With fresher eyes this morning (GMT+7) I saw the little ReSharper "what's going on" wheel-icon was in an "always thinking" state; clearing the cache, as you suggested took care of that problem.
cheers, Bill
«In art as in science there is no delight without the detail ... Let me repeat that unless these are thoroughly understood and remembered, all “general ideas” (so easily acquired, so profitably resold) must necessarily remain but worn passports allowing their bearers short cuts from one area of ignorance to another.» Vladimir Nabokov, commentary on translation of “Eugene Onegin.”
|
|
|
|
|
|
But - but - but half the fun of drinking good coffee is to taste it. It's not just about the caffeine!
Get me coffee and no one gets hurt!
|
|
|
|
|
Exactly! I guess that wrist band is for those who would also swap their coffee for an energy dring 
If the brain were so simple we could understand it, we would be so simple we couldn't. — Lyall Watson
|
|
|
|
|
Probably for hipsters so they can drink decaf...
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
Drinking decaf makes as much sense as wearing that stupid wrist band.
Get me coffee and no one gets hurt!
|
|
|
|
|
Gives me a nasty headache: I think it's the brain expecting the good stuff!
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
Quote: I think it's the brain expecting the good stuff
Clearly the brain is not stupid!
Get me coffee and no one gets hurt!
|
|
|
|
|
Coffee is just a carrier for my sugar intake.
|
|
|
|
|
Great. Let's make the #1 used drug in the world that much easier to ingest. 
There are only 10 types of people in the world, those who understand binary and those who don't.
|
|
|
|
|
Yup![^]
I am not a number. I am a ... no, wait!
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
