|
BillWoodruff wrote: Is debugging a lost art ?
I should say so! Personally, I haven't seen a good debugging session since 1990[^]! 
Anything that is unrelated to elephants is irrelephant
Anonymous
-
The problem with quotes on the internet is that you can never tell if they're genuine
Winston Churchill, 1944
-
I'd just like a chance to prove that money can't make me happy.
Me, all the time
|
|
|
|
|
BillWoodruff wrote: Well, what to do with/for/to people who do not have a clue about debugging
An article describing/demonstrating the basics of debugging and I imagine OG would put in his database as a stock answer where appropriate.
Debugging c# is simple, an article would suffice, I would not like to do the same for browser/asp.net/mvc/javascript/etc... there is a lifetime of wasted effort there!
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Hi Mycroft,
There are some articles here on debugging: and I saw one posted this monththat looked promising: [^].
But, this is a "research article" post by a tool vendor that wants me to share my profile details to download a .pdf file to access any content.
And, there are lots of videos on VS/C# debugging: [^].
Perhaps the question is: "how do we lead the horses into the pasture?"
«Tell me and I forget. Teach me and I remember. Involve me and I learn.» Benjamin Franklin
modified 14-Dec-15 2:41am.
|
|
|
|
|
But we do debugging in browser/asp.net/mvc/javascript/etc... How else would be done otherwise. 
|
|
|
|
|
Maybe beside all the series we already have (HTML, MVC and others) CP should open a content for debugging - it will create a article-base that we can feed to the QA...
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
|
I think that debugging is something that is skimmed on when it comes to programming education.
I'm not very good at it myself but I've picked up a few tips and tricks that tends to help me.
I think a lot lies in recognizing errors and utilizing error codes. A missed semicolon or bracket might not generate a error where the error code by itself will help you but you tend to recognize the structure of the error in your ide fairly quickly. This is the most basic of stuff but too common.
I think it should be mandatory when studying programming to early on have a course in debugging to learn how to take advantage of different tools and learn some debugging methods.
|
|
|
|
|
Member 11683251 wrote: I think that debugging is something that is skimmed on when it comes to programming education.
Agreed! When I went through programming classes (98-00) we were never taught how to debug. I got a part-time programming job in my junior year and remember finding out about breakpoints and the magical F8 (now F11) key!
I also remember starting in classic ASP and javascript and having to get creative on the debugging using alerts or response.writing variable values to see what was happening. It's sooo much easier these days! 
"Go forth into the source" - Neal Morse
|
|
|
|
|
We did learn about break points but they are so basic that its almost criminal leaving them out of education. I think learning by doing is fairly important when it comes to debugging, having a small course where you learn about the most common tools and have to solve a few problems via finding bugs in code isn't something that's too difficult. I mean I could prepare several cases in a short order to be used.
Similar with your experience with asp and javascript I did some programming with unity and monodevelop a few years back. We were having trouble getting the IDE's tools to work with Unity and was pressed for time so there was some creative logging and peak functions written to work around that. We also got a lot better at looking at the code more attentively.
|
|
|
|
|
I think a lot of it is that "programming" is becoming a "required course" in some education systems, just as Maths has been for years.
And that means that a heck of a lot of people who have no aptitude - and definitely no interest - in the subject are having to sit through it and then do homework. They are used to courses where thinking isn't an option - memory and Google is enough - so when you get to work which has no right answer but a million different ways to get the right result it throws them. Thinking isn't an easy habit to get into, and the modern world positively encourages you not try it, just "follow the herd" and do what they do, say what they say, like what they like (and of course "buy what they buy").
Debugging isn't just a skill, it's a state of mind - and most of us who came into the industry early already had the right "how does that work?" when we first sat down with a compiler (or a stack of blank cards and a punch machine in my case).
But I have seen a few people there who would appear to be trying to hold down a job purely by asking questions in QA - and everyone knows you should use vWorker for that! 
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
OriginalGriff wrote: Debugging isn't just a skill, it's a state of mind
Hi Griff, I like those words !
But, I keep thinking that the situation vis-a-vis debugging knowledge would be equivalent ... for automobiles ... to someone who only uses one forward gear in the gearbox, and tries to go backwards by making a full-circle turn ... then wonders why they get stuck in traffic.
«Tell me and I forget. Teach me and I remember. Involve me and I learn.» Benjamin Franklin
|
|
|
|
|
Griff's right, in that it's a systematic approach to finding the problem.
That's not new or old developer, it's more of "does developer understand the problem, and approach a solution in a logical manner" versus "let's try to hack some stuff together, and see how it goes."
|
|
|
|
|
If you post a question over on the dark side (SO) you get prompted with similar questions / answers before you submit your own, in an effort to determine if a related / similar question has already been posted which may be helpful.
Maybe during the question creation process, we try to eliminate all these sorts of questions before they ever get posted.
Before you post this question.....
1. What have you tried so far?
2. Are any of these related questions helpful to you?
Whilst we don't want to turn CP into the elitist forum that SO has become, we also want developers to be able to help themselves.
"There are two ways of constructing a software design: One way is to make it so simple that there are obviously no deficiencies, and the other way is to make it so complicated that there are no obvious deficiencies. The first method is far more difficult." - C.A.R. Hoare
Home | LinkedIn | Google+ | Twitter
|
|
|
|
|
Have to admit I want to put my fist through the monitor every time I see a question with "Object reference" in the title. When I click the question and see a 300 line code dump with no indication what line the error is on I want to through it out the window.
As for debugging tutorials, I tend to refer people to this link
Mastering Debugging in Visual Studio 2010 - A Beginner's Guide[^]
As the adage says, give a man a fish and he'll eat for a day, ask about null reference exceptions and you annoy the living cr*p out of a lot of devs.
|
|
|
|
|
Being a 1970 model I learnt to debug Cobol code using hexadecimal dumps on reams of paper.
Sounds awful but in practise it was not too bad, it was just a case of being methodical when one went through the 90+ pages of paper.
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
|
|
|
|
|
New? Wellllllllll - in the 1980's I had a FTIR* from Hewlett Packard - the software was written in England on IDRIS. The software was rev. 5 and buggy as hell.
We got updates - rev 6, 7, . . . etc. - and rarely was a bug fixed.
Not contesting what you mention, above, there's also the problem of coders so arrogant that they don't check for bugs.
If we go into the current climate, it's beyond coding: so much is manufactured as cheaply as possible and it's left to the consumer to get a replacement. As it turns out, it's cheaper to do no Q/C and replace the items that fail.
So, why not with code?
After all, how many innocent marks users bring their PC in for a repair due to software problems and the solution is to reload the operating system - trashing all of their data and non-OEM apps.
Not debugging? Perhaps it's because it's what has come to be acceptable.
* Fourier Transform Infrared Spectrometer
| "The difference between genius and stupidity is that genius has its limits." - Albert Einstein | | "As far as we know, our computer has never had an undetected error." - Weisert | | "If you are searching for perfection in others, then you seek disappointment. If you are seek perfection in yourself, then you will find failure." - Balboos HaGadol Mar 2010 |
|
|
|
|
|
Wait.. are you implying that posting questions in QA ISN'T debugging??
If it's not broken, fix it until it is
|
|
|
|
|
Kevin Marois wrote: Wait.. are you implying that posting questions in QA ISN'T debugging??
With alarming frequency ... yes.
«Tell me and I forget. Teach me and I remember. Involve me and I learn.» Benjamin Franklin
|
|
|
|
|
Its not the art of debugging that is missing, its the whole process of problem solving for which debugging is a tool. Most programming quickie course teach how to write code, but not how to
1 methodically analyze problems,
2 review the evidence,
3 read the code,
4 formulate an hypothesis for the primary cause,
5 use the debugger and other available tools to prove or disprove the hypothesis,
6 repeat as required.
This is stuff you had to do when compiles took many minutes and had to be submitted to a mainframe, possibly on punch cards. Now, with a couple of seconds to compile massive solutions, you see them hacking at the code and re-running to see if it is fixed, not checking to see if their changes have 'suboptimal' side effects.
|
|
|
|
|
I like this general discussion - and your post struck a chord - now, I'm not so good at this yet (because I know how to debug & use logging etc so to some extent I 'get away with it' ), but I believe using 'tests'/a testing framework appropriate for whatever dev toolchain is being used, would assist greatly - not sure where it fits in 1-6 but its another 'tool' somewhere in the mix
|
|
|
|
|
Unit, Integration, and Acceptance Testing is a whole other discipline with the aim to prevent errors and prove the code meets requirements and works. Debugging is what happens when something slips through the Testing.
Both have the goal of creating bug free code, but Testing is proactive and Debugging is reactive.
Testing usually has the pointy-haired manager complaining about all the effort the doesn't create new code.
With debugging there is usually panic and pointy-haired managers demanding status every 10 minutes.
Poor PMs will try and save time/money by doing a poor job of Testing and then blame the programmers when they more than pay for it with bugs, debugging, and large code update/rewrites.
Ideally, when you are trying to fix a bug you should write a Unit Test to verify the bug, and validate the fix. Then fix the bug. The Test will tell you when you are done and the pre-existing Tests will tell you that you didn't break anything else.
modified 14-Dec-15 23:45pm.
|
|
|
|
|
This topic struck a note with me as well, as I find that most new developers have next to no skill in doing any sort of deep debugging.
I find myself in the group that learned debugging in the "old days" - I actually honed my skills in the '70s on the early hobbyist computers, teaching myself machine language/assembler programming (side note - first processor I programmed on was an 1802  ). Back then there wasn't a lot of good programming documentation - you were lucky to get a description of the ports/memory map locations and a brief description of each. And there was internet as such, so unless you were part of a user group or had access to a good local BBS, you had to figure these things out for yourself.
So often, you would have to really think through how to solve a problem, find the write approach for the hardware you were using, and then write a test case you could work through in a debugger to see what was actually happening. You would learn something, update the code, and try again. This iterative approach was great in getting a deep insight into your computer environment, and it really made you think through the problem you were trying to solve. (side note - I remember loving Microsoft CodeView, and how you could bring up the application in your EGA display, and the debugger on your monochrome display).
Yes, today we do have test frameworks to help catch problems before they occur. But it is next to impossible to anticipate every possible situation. Especially when you have to integrate 3rd party libraries and frameworks, which may or may not work precisely as documented. There will always be times when something goes awry, and you better know how to dig into the deeper levels of the code with a debugger, isolating the issue, and coming up with a reasonable fix.
I don't think debugging per se is a lost art, but there are certainly degrees of expertise to debugging. I know that when I have an customer support issue that needs to be fixed, the first thing I do is not to pull up the debugger, but think about the problem, trying to think about what the issue is, and the approaches that might be required - in short, come up with a plan. I find that in doing this first, I tend to have a better idea of where in the code to look at first, and what hints at issues I should be paying attention to, and what approach I should take to debugging the code.
A lot of this is simple experience. Those of us from "the old days" didn't have a lot of choice, and had a lot of experience in debugging code - as that was the only way we had available. Today though, with many more "proactive" approaches to dealing with issues, developers don't get the same level of deep debugging experience. And that is a cause for concern, as I doubt that the need for debugging will ever go away.
|
|
|
|
|
That's a very nice summary and I fully agree with it! What a glorious time when we had to read memory dumps in order to find a bug that was caused by a module written in Assembler 
|
|
|
|
|
Got my CS degree in 03. The only how to debug education I was given was in HS; a number of my peers in college at the time appeared clueless about debugging. The situation with lack of debugging training was made worse by the fact that someone with pointy hair had settled the MSVC vs GCC holy war by mandating that freshman C++ 1/2 were to be taught using Borlands Tools. Neither of my profs, nor any of the student TAs in the labs really had a clue with Borland's stuff and weren't able to show us how to use any of the debuggering tools (Freudian slip, the Borland IDE was horrible at the time). More than a few basically said that for grading they normally just used their favorite compiler and only tried running in Borlands if it didn't work in theirs. Beyond freshman year the general req was just to state what compiler you used when you submitted.
Did you ever see history portrayed as an old man with a wise brow and pulseless heart, waging all things in the balance of reason?
Is not rather the genius of history like an eternal, imploring maiden, full of fire, with a burning heart and flaming soul, humanly warm and humanly beautiful?
--Zachris Topelius
Training a telescope on one’s own belly button will only reveal lint. You like that? You go right on staring at it. I prefer looking at galaxies.
-- Sarah Hoyt
|
|
|
|
|
When I was in HS taking CS we had an entire section on learning to use the debugger. That was because we were taught by someone who knew it was important to understand the entire process no matter the language. Starting with Pascal, then moved into C++, Delphi, Java, etc.
In college, one of the required courses for all CS majors was Logic. Imagine requiring someone know how to think through a problem!
More often than not, when I get called over to help fix someone else's code because it won't run they have done zero debugging. If I ask if they have added breakpoints and stepped through the code all I get is a blank stare like I've grown a second head. Gotten some of them trained because I stopped helping them if they hadn't.
Some of the logic I've seen just hurt my brain. Why on earth would you fire a request to get all the information for a record for each and every page during onload? If you don't need it or it doesn't change, why do you get it again? Are you worried that the database fairy decided to play a prank on you?
Along with debugging, I question if orders of efficiency (Big O notation) are taught. It is like when computers got powerful, all the basics got tossed out the window. 
|
|
|
|
|
I agree on 'efficiency' - what data structure to use where, knowing its 'general' characteristics with respect to lookups, traversals etc - Im just not how to express the relevant characteristics - I guess thats why Big O is important - it just seems pretty 'dry' as a topic
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
