|
Yes, he has, as so have I. It is garbage compared to .NET.
|
|
|
|
|
Dave Kreskowiak wrote: It is garbage compared to .NET.
I wouldn't agree with you although I admit that it was a lot "less" than .NET that a comparison itself is not warranted.
But most people will agree with me that in the pre-.NET era, we did not have many choice as far as RAD tools were concerned.
|
|
|
|
|
Shameel wrote: But most people will agree with me that in the pre-.NET era, we did not have many choice as far as RAD tools were concerned.
Yes, pre .NET the basic choice was RAD or real programming.
Christian Graus
Driven to the arms of OSX by Vista.
Read my blog to find out how I've worked around bugs in Microsoft tools and frameworks.
|
|
|
|
|
Oh, you mean C, C++, Delphi, PowerBuilder, Java, ...
|
|
|
|
|
|
So learn C++, what do you want, this is a choice you make when designing an application, not when already writing one.
|
|
|
|
|
So you really want to put up with poor contructs and design restrictions to gain code protection? That's all??
You don't have to protect your entire codebase in an application. You really only need to protect business logic and data access. The rest is just UI stuff that really doesn't need protection. If it's that damn critical, you've even have to obfuscate the VB6 code.
Face it, ANY code can be decompiled back to some form that is usable by a hacker. So what if they can't get the VB6 source back, they can still use a C equivilent that a decompiler can output of your VB6 app.
And yes, there are tools out there that will defeat .NET Reflector.
IMHO, what you gain from .NET greatly outweighs the "protection" you get when using VB6.
|
|
|
|
|
I have write following code for encrypt a file. But i don't know how to decrypt that file. Can anybody tell me how should i do that. I have declare a variable named k for store the key that used to encryption
Private k As Byte()
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim infilename As String = "C:\aa.txt"
Dim outfilename As String = "C:\aa1.txt"
Dim infile As FileStream = New FileStream(infilename, FileMode.Open, FileAccess.Read)
Dim outfile As FileStream = New FileStream(outfilename, FileMode.OpenOrCreate, FileAccess.Write)
Dim malg As SymmetricAlgorithm = New RijndaelManaged
malg.GenerateKey()
k = malg.Key
Dim filedata(infile.Length - 1) As Byte
infile.Read(filedata, 0, CType(infile.Length, Integer))
Dim myenc As ICryptoTransform = malg.CreateEncryptor
Dim cryps As CryptoStream = New CryptoStream(outfile, myenc, CryptoStreamMode.Write)
cryps.Write(filedata, 0, filedata.Length)
cryps.Close()
infile.Close()
outfile.Close()
|
|
|
|
|
|
First, this is a repost. I received no answers from my previous query, and I feel it might have been due to my poor explanation of the scenario.
Scenario: I have made an MDI application. My main form has a flowlayoutpanel docked to the left (menu) and a panel docked to the top (header). My menu can be collapsed or expanded off a button click. The reason for this is to allow more content area (workspace) for forms that are loaded. As you know, the default backcolor for a MDI parent is a deep grey, which just looks horrible.
All this functionality works great. The last piece was having a background image on the workspace, which was simple enough. Set a BackgroundImage. This is done with the following code:
Me.BackgroundImage = CType(resources.GetObject("$this.BackgroundImage"), System.Drawing.Image)
Me.BackgroundImageLayout = System.Windows.Forms.ImageLayout.Stretch
Works fine, but when the menu is collapsed, the background image is not redrawn so there appears to be the same image twice by overlapping. The background image is redrawn perfectly when the main application is minimized then maximized, or you move a form over the entire working area that has a backgroundimage and it is magically repainted.
Is there some property or technique needed to force this repaint on any given particular event?
|
|
|
|
|
There is no setting to change. IMHO, background images behind MDIChild windows just makes the window look more cluttered, but it's my app...
What I think you're missing is the MdiParent form renders it child windows in a control, just like a Panel control is a container for holding and drawing other controls. That control is called "MdiClient" and it's automatically added to any form that is tagged as an Mdiparent.
Instead of setting the background of the MdiParent form, grab a reference to the MdiClient control by searching the Controls collection of the MdiParent form, then set the BackgroundImage property of the MdiClient instead.
|
|
|
|
|
I tried the following;
Private Sub frmMenuParent_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'set the mdiclient bg image
For Each ctrl As Control In Me.Controls
If TypeOf (ctrl) Is MdiClient Then
ctrl.BackgroundImage = Global.snd.guiMainMenu.My.Resources.Resources._VisionMainMenuBackgrnd1024_768
ctrl.BackgroundImageLayout = ImageLayout.Stretch
End If
Next
End Sub
But the background image was still tiled, and not stretched. When I collapsed my menu the same behavior occured, where it seems the background moved instead of being redrawn to stretch the entire container area.
Any ideas?
|
|
|
|
|
From the documentation on the MdiClient class, it looks like BackgroundImageLayout is not used. Try changing the BackgroundImageLayout of the form instead, but you still have to keep this code that you posted to change the BackgroundImage of the MdiClient control.
As another possible option, you could try the Paint event of the MdiClient control (you'll have to write this up manually) and painting the background image yourself.
|
|
|
|
|
Well that suggestion definately made the initial drawing stretched, so I thank you on that. But the original issue still stands as when controls are hidden to expand the working area, the image is tiled, overlapped etc showing that it was never redrawn, just moved or nudged.
Dave Kreskowiak wrote: As another possible option, you could try the Paint event of the MdiClient control (you'll have to write this up manually) and painting the background image yourself.
I thought of this but was reluctant due to a performance hit, if there is no other way I guess I will implement this.
|
|
|
|
|
Just an FYI in case you where interested, the only solution I came up with where handling the Resize and RegionChanged events of the MdiClient and then calling an Invalidate() method on the MdiClient to force itself to redraw.
Not pretty or efficient, nothing else I could think of.
Thanks,
Elie
|
|
|
|
|
Am in my first year of Uni doing business I.T and program development is one of my lectures. The lecturer is probably the worst lecturer I have ever come across. He is about 60 and admits himself that he learnt programming in the 1970's. Over the last 8 weeks I've been having lectures with him he has been teaching the class out of a book 'Visual Basic is easy steps'. It is absolutely laughable and we (the whole class) are no better off from when we started the course on the subject of programming. I have never done any programming previously either. Now I have an assignment in by next Tuesday, 8th December and as you can probably imagine I have no idea what I have to do.
Any help from you guys and I really would be very appreciative.
This might look very simple to you guys but bare in mind that I have never done any programming before in my life.
This is the first (of many) questions:
You have a file of information on insurance salespeople. The file contains name and current monthly sales total for each salesperson. Provide a pseudocode design that reads the data from the file and writes out the name and sales figures for the salesperson having the highest sales figures.
Please help!! 
|
|
|
|
|
See points number 2 and 11 in the second sticky at the top of the Forum.
Apart from that you ain't going to get much help from anyone on here without first having a go yourself.
|
|
|
|
|
You have my sympathy, but at Uni you are also expected to help yourself (at least I think so, I never actually went).
benducky wrote: he has been teaching the class out of a book 'Visual Basic is easy steps'.
well, maybe its a good starting point for pepole who have never programmed?
benducky wrote: he learnt programming in the 1970's.
Well, I learnt in the early 80's, and it was a lot harder than it is now, so no need to be derogatory.
benducky wrote: Provide a pseudocode design
Means you don't have to know any specific language, just show the logic to do it. Surely you can do this?
Bob
Ashfield Consultants Ltd
Proud to be a 2009 Code Project MVP
|
|
|
|
|
On what you need to do, that is between you and your lecturer.
On how to do it, assuming you want to learn programming, and want to pass your course, you should:
- study the course material, no matter what it is or how old it is;
- buy and study additional material. And no I have no book recommendation for VB.NET but here[^] is my view on books.
Furthermore make Google your friend, and learn from the many good articles here on CodeProject.
|
|
|
|
|
Well, if I were you my first step would be to buy a copy of the book. Pretty cheap on amazon Visual Basic Easy Steps - Anderson[^].
Question though. Why are you doing a university course that teaches from a ten year old text book on an extinct programming language? Even the MS extended support period for VB6 has been and gone! Or is this a course in programming history? It certainly is to far adrift from current programming to be of any use in the real world.
Having said that, the principles of programming are unchanged since the seventies. Good code is still good code. Languages may advance, but design patterns never change, and all good programming is done to design patterns (because the design pattern tells us the best way to do it, and if you code the best way without knowing the pattern before then you just re-invented the wheel, but well done anyway), most of which where first worked out in the seventies!
|
|
|
|
|
benducky wrote: Over the last 8 weeks I've been having lectures with him he has been teaching the class out of a book 'Visual Basic is easy steps'.
And you are saying that over those 8 weeks you have made no attempt to discuss this with your lecturer. Or to go to the library and check out some alternative books that could help you? Or search the internet for useful articles?
You can learn the fundamentals of programming in Visual Basic (or most languages) in a weekend by reading a self-study guide. As to writing pseudo-code that is just a simple matter of expressing a possible solution to your problem in simple steps. Try explaining in pseudo-code how to open a door, that should get you started.
|
|
|
|
|
Hi,
you do make an impression of a little bit lazy, but nevertheless, instead to admonish you like the others I'm going to try to help you.
Your question is not really specific in regard of the pseudo code but one design that comes to mind are three methods.
One to read in the records of the salespeople, one to analyze and one to write out the result. And of course the main method.
Of course, one could do it in one method.
Definition of SalesPeopleRecord
FIELD DESCRIPTION DATA TYPE SalesPeopleRecord
Name : Character
Sale : Decimal
Main method:
Main Procedure SalesPeople
CALL ReadSalesPeopleRecords with filename
CALL AnalyzeSales with SalesPeopleRecordList
CALL PrintHighestSale with highestRecord
End Main Procedure
First method could be (read records):
Procedure ReadSalesPeopleRecords
While Not End Of File
Create New SalesPeopleRecord
Read Name of Salespeople
Store Name in Record
Read Monthly Sales Total
Store Monthly Sales Total in Record
Store Record in Record List
End While
Return Records
End Procedure
Second (analyze):
Procedure AnalyzeSales
Set highestSale to 0
Declare highestRecord
For Each Record In SalesPeopleRecords
IF CurrentRecord.Sale > highestSale THEN
SET highestRecord to CurrentRecord
SET highestSale to CurrentRecord.Sale
ENDIF
End For Each
Return highestRecord
End Procedure
Third (print):
Procedure PrintHighestSale
Write highestRecord.Name
Write highestRecord.Sale
End Procedure
Bye,
Thomas.
|
|
|
|
|
Hi,
I have an ASP.NET web application, code behind in VB.NET, and a separate VB.NET Console application.
I've created a button on the web page which when clicked should call the Console applition. like this...
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click
ConsoleServer.Main()
End Sub
ConsoleServer is a module of the Console Application which does all processing, I have added this module to my Web Solution.
It does go into the module, but doesnt open up the console window. I expect it to open the console window at the point where i write text(Console.WriteLine...). It just passes that point without opening the console window.
What do I need to do?
Many thanks
|
|
|
|
|
Well, firstly if it DID open a console window (and it won't), it would be on the server where you are running IIS, but most importantly, you CANNOT run a console app from a web page. It just cannot be done, otherwise there would be even more viruses than there are.
Bob
Ashfield Consultants Ltd
Proud to be a 2009 Code Project MVP
|
|
|
|
|
Oh, but it DID open a console window - on the server, and on a different desktop than the one you see when you login on the server.
You cannot launch a console window on the client side from an ASP.NET application.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
