|
f.fuga wrote: So the question is: the most updated library do not work because something has been broken in the library itself, or did I made some mistake on my application?
It is highly unlikely that the library is broken.
It should be some problem with your application.
You should try and debug it.
«_Superman_»
I love work. It gives me something to do between weekends.
Microsoft MVP (Visual C++)
|
|
|
|
|
«_Superman_» wrote: It is highly unlikely that the library is broken.
It should be some problem with your application.
You should try and debug it.
I agree with you.
I have checked the libraries version, both release and debug are ok.
I think that Release version of my program works as expected because, of course, ASSERT() has only means when compiling in debug mode.
From a practical approach, I should ignore the problem - the Release works. But I suspect that I will find again this problem in the future.
So I will keep search for a solution.
Do you know any issue when using some MFC classes from DLL and EXE ? I know the "AFX_MANAGE_STATE(AfxGetStaticModuleState());" call needed when accessing resources, I suspect a similar problem...
Thank you
Federico
|
|
|
|
|
Hey,
I encountered the exactly same problem while working with CMFCPropertyGridCtrl in my DLL project.
After many trial, i found a way to use CMFCPropertyGridCtrl in DLL without this error.
All you have to do is Create a derived class of CMFCPropertyGridToolTipCtrl(),Make its protected static variable "m_strClassName" NULL in Constructor.
for example;
//////////////////////////////////////////////////////////////////////////////////
Class CMyToolTipCtrl::CMFCPropertyGridToolTipCtrl();
CMyToolTipCtrl::CMyToolTipCtrl()
{
m_strClassName = "";
}
///////////////////////////////////////////////////////////////////////////////////
Now create ToolTipctrl from your CMFCPropertyGridToolTipCtrl() derived class on Init of the CMFCPropertyGridCtrl derived Class.
for example,
///////////////////////////////////////////////////////////////////////////////////
Class MyPropertyGridCtrl::CMFCPropertyGridCtrl();
void MyPropertyGridCtrl::Init()
{
CMyToolTipCtrl p_tooltip;
p_tooltip.Create(this);
}
//////////////////////////////////////////////////////////////////////////////////////
There is always a way.
Priyanka Oza.
|
|
|
|
|
I have some code that has just recently started to 'fail'. I suspect that as long the method StdioFile::ReadString(CString&) would remove both a carriage return and linefeed pair, the code would work fine. I've been through the documentation on MSDN and through the MFC code and it seems that even though the method will 'break' on a carriage return linefeed pair, it will only remove the linefeed character from the string before it is returned. Does anyone know if this is a change that's documented somewhere. Thanks.
Chris Meech
I am Canadian. [heard in a local bar]
In theory there is no difference between theory and practice. In practice there is. [Yogi Berra]
|
|
|
|
|
I know that in UNICODE builds, this is a problem when reading UTF16 files. A fix is to open the file in binary mode, and strip the carriage return off the incoming string. I do not know where the docs say so though, but a quick search of "CStdioFile ReadString Unicode" will return lots of discussions on the issue.
You may be right
I may be crazy
-- Billy Joel --
Within you lies the power for good - Use it!
|
|
|
|
|
Thanks for the help, PJ. This is one of those problems that comes along at the end of the day when the brain's function at a little lower level than normal. This morning, I did some more research and found that the cr/lf pair translation only occurs if the file is opened in text mode. It turns out that a change in our class library, ironically to assist with handling UTF16 type files, changed the default opening mode from type text to type binary and that's causing the issue.
Appreciate the response. 
Chris Meech
I am Canadian. [heard in a local bar]
In theory there is no difference between theory and practice. In practice there is. [Yogi Berra]
|
|
|
|
|
Hello.
CDC *pDC = GetDC();
CDC tmpDC;
BOOL bRet=tmpDC.CreateCompatibleDC( pDC ); //bRet is 1 => it means succes.
CBitmap m_bmp;
bRet= m_bmp.CreateCompatibleBitmap( pDC, rect.Width(), rect.Height() );
//bRet is 0 ==>it is an error.
DWORD err=GetLastError(); //err is 8. --> it is an error.
error code 8 means : "Not enough storage is available to process this command. "
here, my hdd is 50M remains, and I have enough space fo runing some program...
Why, CreateCompatibleDC() return error code 8?
my System is abnormal?
Thanks.
|
|
|
|
|
rambojanggoon wrote: my System is abnormal?
Your CRect rect is possibly 'abnormal'. Check its dimensions.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
[My articles]
|
|
|
|
|
"Not enough storage" here means memory.
rect not initialized?
I also think rect is the problem.
«_Superman_»
I love work. It gives me something to do between weekends.
Microsoft MVP (Visual C++)
|
|
|
|
|
Hello,
I have created a CRichEditCtrl without borders . After i create it i want to change its borders . How do i change its borders with WS_BORDER window style ?
Pritha
|
|
|
|
|
Are you saying that you want to add borders?
You can use the ModifyStyle[^] method.
richEdit.ModifyStyle(0, WS_BORDER);
«_Superman_»
I love work. It gives me something to do between weekends.
Microsoft MVP (Visual C++)
|
|
|
|
|
And then call RedrawWindow() with the RDW_INVALIDATE, RDW_FRAME, and RDW_UPDATENOW flags.
You may be right
I may be crazy
-- Billy Joel --
Within you lies the power for good - Use it!
|
|
|
|
|
|
I am developing a property sheet-based application on XP using VC++ 6. When it starts it talks briefly to an instrument over a serial port in app::InitInstance(), creates the property sheet, adds a few pages, and does an appSheet.DoModal() to make it appear. In order to get an icon to appear in the taskbar and Alt-Tab, I use this code in appSheet::OnInitDialog():
AfxGetMainWnd()->SetIcon(AfxGetApp()->LoadIcon(IDR_MAINFRAME), TRUE);
AfxGetMainWnd()->SetIcon(AfxGetApp()->LoadIcon(IDR_MAINFRAME), FALSE);
The app works just fine, and until I added a slight twist mentioned next the icons appeared as expected.
For the several seconds during which the app is initially talking to the instrument the user sees nothing happening. So at the beginning of app::InitInstance() I create a modeless dialog that asks the user to be patient while the app starts up, and then hide the dialog at the end of the startup property page's OnInitDialog(). This works fine and looks great. Except that now SetIcon(), above, returns 0 and I get the generic white window icon for Alt-Tab and nothing in the taskbar. The icon in the title bar is still correct.
If I use the following code in place of the previous code, I can get the icon to display when I do an Alt-Tab, but nothing shows up in the taskbar.
HICON hIcon=AfxGetApp()->LoadIcon(IDR_MAINFRAME);
CWnd* pFrame=AfxGetMainWnd();
::SetClassLong(pFrame->GetSafeHwnd(), GCL_HICON, (long)hIcon);
Interestingly, until I do this the generic MFC icon shows up in the taskbar.
Any ideas why this is happening and how to get my icon and app name to appear in the taskbar?
Thanks
|
|
|
|
|
What are the values returned by the SetIcon() method? It could be that your modeless dialog has the icons locked while it is displayed?
You may be right
I may be crazy
-- Billy Joel --
Within you lies the power for good - Use it!
|
|
|
|
|
SetIcon() returns 0 (zero) rather than a handle to an icon.
I'm not sure what you mean about the application's icons being locked by the modeless dialog; how would I investigate this possibility? And if this is the case, can I make the dialog unlock them? The dialog lives as long as the app and is hidden or displayed, with different messages, as I change modes while communicating with the instrument.
|
|
|
|
|
rfparker wrote: SetIcon() returns 0 (zero) rather than a handle to an icon.
So SetIcon is failing.
I would suggest that you take the communication and startup dialog code out of your InitInstance() function and put them in a separate function so that your app can be properly initialized before you do anything else. One way is to post a custom message to your main window at the end of InitInstance() and do the communication from the message handler.
You may be right
I may be crazy
-- Billy Joel --
Within you lies the power for good - Use it!
|
|
|
|
|
Yes, that might be a better way to do it (though AppWizard puts the call to DoModal() in a dialog-based app's InitInstance()) and I've made that change. It makes no difference to the functionality that I see.
Since I can get the correct title bar and Alt-Tab icons to appear by setting them in the property sheet's OnInitDialog(), the real issue is the button on the taskbar. I guess the modeless dialog is considered the main window for the task (it has to be created first), since when it is displayed the button appears and as soon as it is hidden (SW_HIDE) the button disappears. So I can't hide the modeless dialog without also disappearing the taskbar button. So for now I'm not hiding the modeless dialog, which is undesirable.
There is also the issue of the initial icon on the taskbar button. I've added SetWindowText() to the modeless dialog's OnInitDialog() to set the proper caption, since there's no title bar, and added WS_SYSMENU to the .rc to force the icon to appear, but, until the property sheet loads the icon I want, I see the MFC cube icon in the taskbar button. After the property sheet loads the icon, that one is always displayed on the taskbar, even when I've temporarily destroyed the property sheet and the modeless dialog has reappeared.
What I'd like is to be able to hide the modeless dialog when I display the property sheet and not have the taskbar button disappear, and to set the taskbar button's icon so the MFC cube doesn't appear.
|
|
|
|
|
i just tried following code it works
m_prop.m_hIcon = AfxGetApp()->LoadIcon(IDI_MYICON);
m_prop.m_psh.dwFlags |= PSP_USEHICON;
m_prop.m_psh.hIcon = m_prop.m_hIcon;
SetIcon(m_hIcon, TRUE);
try this may help you...
The secret of life is not enjoyment
but education through experience.
- Swami Vivekananda.
|
|
|
|
|
The problem I have is in the table.
When I create a table of 12 lines the data printed is correct.
Then I come back in beause the is two tables. The second table has 6 rows.
Howver I only process only 5 roww. I move in data for these 5 rows and the when printed. The 6 row hase the data from the frist pages data for the 6th row. I do space out the data however, the data still has the data from the first page for the 6 row.
Can you PLEASE help me. My email address is WillmsDick@hotmain.com
Thanks
|
|
|
|
|
|
Post what you have tried (please use code tags), and maybe rephrase your original post as it was very unclear (to me anyways) as to what you are saying.
|
|
|
|
|
You should delete the data in your first table (12 rows) before adding the new data from the second table. When all you do is overwrite the old data you can get remnants of the old data mixed in with the new.
If this did not help you then you should post some relevant code to give us a better idea of what is happening.
You may be right
I may be crazy
-- Billy Joel --
Within you lies the power for good - Use it!
|
|
|
|
|
Hi
I need to do some data encryption. I need encrypt the data using "perl" and decrypt the data using Borland C++ (ActiveX).
Any recommendations are greatly appreciated.
Thanks,
modified on Tuesday, October 6, 2009 1:59 PM
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
