|
but i have also used server.send(AnyMessage);
this isn't working as well..
|
|
|
|
|
Okay, maybe this a problem in understanding:
you wrote code for receiving data at client side, right?
You used the method .Write(). This method writes bytes to the stream. I think in a receiving method you should use e.g. Read(byte[], int, int), or am I wrong? 
|
|
|
|
|
the problem has been resolved.. the message was not sending for the second time to client because i was using IF loop in client side that would take data from server just once, now on the client side i have replaced if by WHILE(true) and it receives the data until a break is performed send by server in the form of Disconnect..newys thank you guys 
|
|
|
|
|
muhammad_umair wrote: newys
Syntax error. 'newys' does not exist in the english language.
|
|
|
|
|
Hi all,
I am using Visual Studio 2005 now. But why can't I get this MouseWheel Event of a panel working on? Code for that is as follows:
void t_MouseWheel(object sender, MouseEventArgs e)
{
int numberOfTextLinesToMove = e.Delta * SystemInformation.MouseWheelScrollLines / 120;
int numberOfPixelsToMove = numberOfTextLinesToMove * fontSize;
if (numberOfPixelsToMove != 0)
{
System.Drawing.Drawing2D.Matrix translateMatrix = new System.Drawing.Drawing2D.Matrix();
translateMatrix.Translate(0, numberOfPixelsToMove);
mousePath.Transform(translateMatrix);
}
t.Invalidate();
}
t indicates a TableLayoutPanel.
And then I added this line: t.MouseWheel += new MouseEventHandler(t_MouseWheel); after InitialComponent();.
Is there anything wrong here?
Please help me... Thanks!
BR!
|
|
|
|
|
Probably because it doesn't have the focus. Do you have any controls on your panel? If not, and you have controls outside the panel, they they will get the focus and your panel will not. I would suggest that you move the MouseWheel event handler to the form, and check if the mouse pointer is over the panel for your processing.
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
|
|
|
|
|
Hi,
Thanks for your reply. I have some labels on this TableLayoutPanel, and I tried to make this panel get focus by the following code:
void t_MouseEnter(object sender, EventArgs e)
{
t.Focus();
}
But still it doesn't work. I check on the designer window, it's actually doing something cuz the panel is a little bit shaking, however, the panel doesn't scroll up and down. Since I am making a user control, there is a seperated scrollbar beside this panel. Well, that's another thing. Please give some advices, thank you!
Sincerely
|
|
|
|
|
Leapsword wrote: it's actually doing something cuz the panel is a little bit shaking,
OK. So, you didn't set any breakpoints to see if your event fired then ? Sounds like it's firing and your code does not work.
Christian Graus
Driven to the arms of OSX by Vista.
Read my blog to find out how I've worked around bugs in Microsoft tools and frameworks.
|
|
|
|
|
Christian Graus wrote: So, you didn't set any breakpoints to see if your event fired then ?
Well, of course I did. Code works well, but I don't know why it can't scroll,  . Anyway, thank you for reply me.
BR!
|
|
|
|
|
The panel itself cannot recieve the focus, because the user cannot "do anything" with it. As a result, it does not get MouseWheel events unless there is a control on the panel which can interact with the user - such as a text box. In your case, what I would do is hook into the panel.Parent.MouseWheel event and use the MouseEventArgs to check if the mouse pointer is over the panel. This should work fine in a custom control (but I haven't tested it).
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
|
|
|
|
|
Just seen Christians response - I would add Console.WriteLine to your MouseWheel event and look at e.Delta, SystemInformation.MouseWheelScrollLines, numberOfTextLinesToMove, and fontSize. This should confirm that the event is firing, and give you a good idea why it doesn't work.
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
|
|
|
|
|
OriginalGriff wrote: I would add Console.WriteLine to your MouseWheel event and look at e.Delta, SystemInformation.MouseWheelScrollLines, numberOfTextLinesToMove, and fontSize.
Yeah, this is a good idea. But since I've put a breakpoint to this event method, I can get all those values in the immediate window and actually, I can see it step by step in locals window when I press Step Into--F10 key once and once again. I will try your suggestion on your last reply and post back here what I got then. Thanks anyway.
|
|
|
|
|
Debugging is fine - I use it a fair amount - but I tend to use Console.WriteLine in all mouse and focus events because they tend to repeat if you breakpoint! (Focus - break - back to form - focus - break - repeat until very bored!) 
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
|
|
|
|
|
Heh  , yeah, that's true. This is such a good guide. I will try to do it the same way as well. 
|
|
|
|
|
|
I've never had to try to select material outside the visible area (or used a TableLayoutPanel), but I would start by looking at MouseDown, MouseUp and MouseMove because you will probably have to handle the selection yourself.
I just looked at the inheritance heirarchy, and it derives from ScrollableControl, so it should handle scrolling (and by inference selection) itself. Why doesn't that work in yours?
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
|
|
|
|
|
Well, that's true. And of course, the TableLayoutPanel can be set as autoscroll[ture]. I think if I can figure out how to make this MouseWheel Event happen, then that's not a problem no more! Hope so!
|
|
|
|
|
May be the TableLayoutControl contain other controls, such controls covering the TableLayoutContol top, in this time, the OnMouseWheel event may be received by TableLayoutControl's child control.
|
|
|
|
|
Well, thank you. This might be a reason, I am not sure. But what's the solution then? Btw, I have sereval(not only one) labels in this TableLayoutPanel, are you suggesting me to add OnMouseWheel Event for each of them? I think that would be too error-prone... 
|
|
|
|
|
1) you should make sure you can have triggered the event.
just user 'messageBox.Show("here");' to test it.
2)if you can trigger the event. you must have the wrong logic error in here:
int numberOfTextLinesToMove = e.Delta * SystemInformation.MouseWheelScrollLines / 120;
int numberOfPixelsToMove = numberOfTextLinesToMove * fontSize;
modified 27-May-14 5:33am.
|
|
|
|
|
hi all
i want to add an icon to settings.settings in my project
then i will use that icon for my notifyicon that i have in the form
although i tried in many ways i couldnt add that icon to the settings.settings because i couldnt know what do i have to enter to the "type" and "value" areas
i will be happy if u help me
|
|
|
|
|
You should add it into Resource, not Settings.
|
|
|
|
|
i tried to do it like the code below
public Form1() {
InitializeComponent();
notifyIcon1.Icon = Properties.Resources.NameOfYourIcon;
}
but i get error when i try to make its exe by using visual studio's own command prompt i mean csc
in the error says
cs 0234: The type or namespace 'properties' doesnt exist in the namespace ProjectName (are u missing an aseembly reference)
so i dont know how can i get rid off from that error
|
|
|
|
|
I developed one application in .Net with Sql Server2005 Database.I create a .EXE file to deploy in client sytem.Here to run application the Framework is necessary in Client System,in such a way sql Server have any limited files are necessary or complete sql server database installed.
Just send u r views
|
|
|
|
|
sai259 wrote: Here to run application the Framework is necessary in Client System
Yes, you would need the .Net framework (Didn't you read this in the first chapter of the book?)
You can see a lot of articles here [^]to learn how to deploy Windows Apps.
sai259 wrote: in such a way sql Server have any limited files are necessary or complete sql server database installed.
Depends on your requirements, the number of users, your database size etc.
You may also have a look at MSDE[^]
Manas Bhardwaj
Please remember to rate helpful or unhelpful answers, it lets us and people reading the forums know if our answers are any good.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
