|
Hi,
I ran a test using VB2008 before I posted, and the DateTimePicker fired a ValueChanged at every click on the checkbox.
This is the code used:
Private Sub DateTimePicker1_ValueChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DateTimePicker1.ValueChanged
Console.WriteLine("ValueChanged: " & DateTimePicker1.Checked & " " & DateTimePicker1.Value)
End Sub
Luc Pattyn [Forum Guidelines] [My Articles]
- before you ask a question here, search CodeProject, then Google
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get
- use the code block button (PRE tags) to preserve formatting when showing multi-line code snippets
|
|
|
|
|
Well Luc, when u check the checkedstate of the datetimepicker in that event then it's easy to trace it. But r u sure when u check/uncheck the control with mouse/keyboard while not changing its value then any event is fired or the respective methods for check/uncheck are executed? If yes then either i am missing something or this feature is not supported in VB2005/C#2005, b'coz i have checked it in my machine and it's not working here as u say. Plz aknowledge further.Regards.
|
|
|
|
|
My system is up-to-date; when I click the checkbox N times the ValueChanged event fires N times. 
Luc Pattyn [Forum Guidelines] [My Articles]
- before you ask a question here, search CodeProject, then Google
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get
- use the code block button (PRE tags) to preserve formatting when showing multi-line code snippets
|
|
|
|
|
I have checked Datetimepicker_valuechanged event. U r right, it is fired everytime the checkbox is checked/unchecked. But a new problem arises from here. Here is the concept I'm trying to work on. Suppose u hav a dtpicker and a listbox on ur form. The listbox contains a list of dates (in dd MMM yyyy format). When u select a date from lstBox it sets that date as the value of the dtPicker. When u uncheck the dtPicker (while not changing its value) it'll set the selectedindex of listbox to -1.
But the problem is, for the 1st time when u select a date from lstbox, the date is set in dtpicker and its checkbox is checked. Right next try to uncheck the dtPicker (without changing its value) u see it's not firing the ValueChanged event and the selectedindex of lstBox is not setting to -1. Plz refer.
|
|
|
|
|
Hey everyone ,
i am working on a custom control,
i was wondering how could i make a property which acts like a list so you could add a list of integers or strings to it through the designer.
for example when you add items to a combobox you got a "..." button near items in the designer and when you click it you can add a list of items through the designer ,
i was wondering how could i achieve that.
thank you for your time.
Net
|
|
|
|
|
For every thing (turn, turn) there is a datatype, and a UITypeEditor for every editing-purpose, under Heaven.
Add a reference to "System.Design" and "System.Drawing.Design".
Imports System.Windows.Forms
Imports System.Drawing.Design
Imports System.ComponentModel
Imports System.ComponentModel.Design
Public Class UserControl1
Private mMyText As String
<Editor(GetType(MultilineStringEditor), GetType(Drawing.Design.UITypeEditor))> _
Public Property MyText() As String
Get
Return mMyText
End Get
Set(ByVal value As String)
mMyText = value
End Set
End Property
End Class
Happy Programming!
I are troll 
modified on Sunday, March 15, 2009 8:26 AM
|
|
|
|
|
Hi. a blind programmering student and using the jaws for windows screen reader from http://www.freedomscientific.com. and reading a visual basic programming book chapter 8 about arrays. did read the chapter and do the hands on sample project and got that working. now up to the first exercise and a bit stuck, any one got some sample code i could look at to get an idea of how to do this, to reference elements of a array for each text box, then to print out the contents of each text box in a four collumn report, did read about this, but need some extra help and guidence how to do this. can any one help. you can e-mail me via startrekcafe@gmail.com the book in programming visual basic dot net 2005 by Julia Bradley and Anit Milspaw, magraw hill press. so will paste the project description below. any help would be appreciate, so did start the project, but got stuck. any help would be appreciated. and trying to visualize this in my head, and not able to see, if a bit of a handicap and a pain. so jaws will read everything on the screen, and some one has written scritps to work with visual studio. got visual studio dot net 2005 express. cheers Marvin. 8.1 Array of a structure. Create a project to analyze an income survey. The statistics for each home include an identification code, the number of members in the household, the yearly income, and the state of residence.
A menu will contain File, Reports, and Help. The File menu will contain
Enter Data and Exit. As the data are entered, they should be assigned from the text boxes to the elements of a structure.
The reports for the project will be sent to the printer and include the following: (a) A four-column report displaying the input data. (b) A listing of the identification number and income for each household that exceeds the average income. (c) The percentage of households having incomes below the poverty level.
|
|
|
|
|
StarTrekCafe wrote: you can e-mail me via startrekcafe@gmail.com
That's not wise, people trawl the web for addresses to spam. On the other hand, if you used this address to register your account, you'll get my reply via email anyhow.
I would expect that you want to create a structure, then as the user finishes entering in all the data for an object, the object is created and the values copied across. There's not really any array operations involved in that. If you have an array of objects, that's fine for a learning example, but in the real world you would use a list, because an array is a fixed size, and a list will contain as many objects as you choose to put into it.
Christian Graus
Driven to the arms of OSX by Vista.
|
|
|
|
|
Hi. so can you give me an example, as need to do this for he book. how to reference elements of a array to several text boxes. or maybe can point me to an example. need this for my programming book. let me know asap if you can help. cheers Marvin.
|
|
|
|
|
i given messagebox code here
MessageBox.Show("welcome to trendz", "Classmaster",MessageBoxButtons.YesNo, MessageBoxIcon.Question)
but i want change background color of the messagebox
please give me reply ,how can i change background color of the messagebox ?
|
|
|
|
|
Hi,
AFAIK you can't modify the behavior of MessageBox, InputBox and the like.
If it does not suit you, you will have to make your own, from scratch.
It is not that hard.
Luc Pattyn [Forum Guidelines] [My Articles]
- before you ask a question here, search CodeProject, then Google
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get
- use the code block button (PRE tags) to preserve formatting when showing multi-line code snippets
|
|
|
|
|
Hi All
I wonder if any one can help me figure out (or just plain tell me) how to make changes to an unmanaged struct created by a C++ DLL from VB.NET.
I think I understand how to make a copy of it, and then makes changes to the copy.
The structure in VB (which matches the unmanaged struct created from the C++ DLL) is:
<StructLayout(LayoutKind.Sequential)> _
Public Structure passedStruct
<MarshalAs(UnmanagedType.U4)> Dim IntNumber As UInt32
<MarshalAs(UnmanagedType.U4)> Dim IntAnother As UInt32
<MarshalAs(UnmanagedType.U4)> Dim ptr2Integer As UInt32
End Structure
I call a function in the C++ DLL that creates a version of the struct, populates it, and returns the ptr to it. I can then make a copy just by something like:
Dim receivedStruct As passedStruct = Marshal.PtrToStructure(ptr, GetType(passedStruct))
This works fine and I can even pass the pointer of the copy back to the C++ DLL and have changes made from the DLL.
However, I'd like to do this the other way around to. I would like for the VB.NET application to receive the pointer from the C++ DLL and then make changes directly to the unmanaged version of the struct rather than making a copy of it. In C++ this is pretty easy, for example:
extern "C" __declspec(dllexport) void ChangeStruct(struct MyStruct * pMyStruct)
{
pMyStruct->IntNumber += 23;
}
which just receives the pointer from VB.NET of a structure created in VB.NET and makes changes to it directly. MyStruct is defined as:
struct MyStruct {
unsigned int IntNumber;
unsigned int IntAnother;
unsigned int IntYetAnother;
};
Does anyone know how to do this same thing in VB.NET?
Many thanks indeed for your assistance.
Kurt
|
|
|
|
|
Hi,
I haven't done any interop from VB.NET, but I did a lot of P/Invoke from C#.
I tend not to allocate stuff in the unmanaged world, let the managed world allocate its
own things, then try and have the native world just access those.
This is what I would try, without a single copy, and without Marshal.PtrToStructure:
- allocate the struct in the managed world
- pass it by reference
- in the unmanaged world accept it as a struct pointer, and read and modify at will
- back in the managed world, see how the structs content has changed, without having made a single copy anywhere.
BTW: IMO you can throw away most of the Marshal attributes, you don't need most of them.
e.g. <marshalas(unmanagedtype.u4)> is the default for UInt32
Luc Pattyn [Forum Guidelines] [My Articles]
- before you ask a question here, search CodeProject, then Google
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get
- use the code block button (PRE tags) to preserve formatting when showing multi-line code snippets
|
|
|
|
|
Thanks Luc - that is kinda what I'm doing at the moment, and it works fine. Thanks for pointing out my overcautious useage of <marshallas...> - a good sign that I don't really know what I'm going 
It is not clear to me why I really need to be able to change the C++ DLL created struct. The arguement that has been given to me is that the C++ developer does not want to make changes to the C++ library to deal with interacting with VB.NET as he wants it to use the code as is for Linux applications to. He also does not want to have a scenario whereby if the DLL is changed the application would have to be changed. Whereas I argue that I at least have to create a .NET wrapper DLL to use the functions and therefore will have to at least make changes to function names if they are changed - hardly a big bother (esp. as it enables me to work in .NET!).
Anyway, the library is for accessing a custom card on the PCI bus. When I call the function that updates the firmware on the card, it creates an struct that contains the various parameters that are needed to define a particular card. Most of these details come from the system, and only a few from the .NET application. I figured that an easy (although not exactly lean) approach would be to simply include the various card details in the call to the DLL function. However this would mean having a different function for the .NET DLL than as for the Linux DLL - i.e., more work for the C++ developer... apparently. If I'd been writing the control application in C++ then apparently I could easily import the class in the DLL and simply use the 'new' keyword to create new card struct objects. As the DLL is not COM or .NET compatible I don't believe I can do that and hence all this back and forth with the two copies of the struct.
Although I see no issue with the struct being created in the managed world (the .NET app) and then passing the pointer to the unmanaged world (the C++ DLL) (as you suggest), I'd like to be able to do it the other way around if possible... if nothing else it is some knowledge that might prove useful one day.
Many thanks, Kurt
|
|
|
|
|
Hi Kurt,
if you insist on having a native struct manipulated by the managed world without actually copying the data into a managed struct, the only way I can see is by going the unsafe way, with pointers, pointer manipulations, and all the niceties C/C++ offers and the managed languages normally are shielding you from.
In C# that would take an "/unsafe" compiler switch, an unsafe{...} code block,
some pointer (say a int* myIntPointer;) and from then on it looks and smells very much like C code.
With that kind of code, any time the DLL changes, your wrapper is open for big trouble. I would suggest, if not already present, the DLL offers an int getVersion() returning a new and higher number after each code modification, so you can check for mismatches before dereferencing pointers and digging in struct members.
Luc Pattyn [Forum Guidelines] [My Articles]
- before you ask a question here, search CodeProject, then Google
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get
- use the code block button (PRE tags) to preserve formatting when showing multi-line code snippets
|
|
|
|
|
Hmmm... sounds like a can of worms I'd rather avoid opening
|
|
|
|
|
Hi,
I'm currently working on a program that automaticly adds pictureboxes whenever you add an entree to a database (access).
I got that working, but Now I'm wondering how you make the picturebox (or whatever) ask where the image is located to draw it in the picturebox.
Example:
Database:
tblAnimals contains
- Dog
- Cat
Now in my form it auto adds 2 pictureboxes without containing any images. Now it should ask for the image location (C/Document/Pictures/Dog.jpg) and draw that in the picturebox.
I have no idea how to this, anyone has any ideas?
Already thx
This is my code now:
Dim bytTeller As Byte
Dim objdtsProducten As New dtsProducten
Dim objtblProductenTA As New dtsProductenTableAdapters.tblProductenTableAdapter
Dim dtrProduct As dtsProducten.tblProductenRow
objtblProductenTA.Fill(objdtsProducten.tblProducten)
For Each dtrProduct In objdtsProducten.tblProducten
Dim ptbKnop As New PictureBox
ptbKnop.Name = dtrProduct.ProductID
ptbKnop.Text = dtrProduct.ProductNaam
ptbKnop.Size = New Size(80, 40)
ptbKnop.Location = New Point((bytTeller Mod 4) * 90, (bytTeller \ 4) * 50)
AddHandler ptbKnop.Click, AddressOf KnopGeklikt
Me.Controls.Add(ptbKnop)
bytTeller += 1
Next
I know I can open a picture with this:
With OpenFileDialog1
.CheckFileExists = True
.ShowReadOnly = False
.Filter = "All Files|*.*|Bitmap Files (*)|*.bmp;*.gif;*.jpg"
.FilterIndex = 2
If .ShowDialog = DialogResult.OK Then
' Load the specified file into a PictureBox control.
Dog.Image = Image.FromFile(.FileName)
End If
End With
But I don't know the name of the picture yet (see DOG)
modified on Friday, March 13, 2009 3:24 PM
|
|
|
|
|
What do you mean by "name of the picture"?? Are you trying to ask the user what the content of the image is?? If so, you just create a small form with a textbox on it and show that to get the users description.
|
|
|
|
|
I` AM LOOKIING FOR A PROGRAMMER TO DEVELEP SOME SMALL PROGRAMES
WITH BIOMETRIC PROGRAMS
BIOMETRIC PROGRAM
-----------------
FACE RECOGNITION
FINGER RECOGNITION
EYE LID RECOGNITION
HEAD MOVEMENT RECOGNITION
THEY ARE ANOTHER 20 SMALL PROJETS IN THE PIPE LINE LIKE
-------------------------------------------------------
OBJECT RECOGNITION
VOICE RECOGNITION
AI
COMMAND RECOGNITION
USB / COM AND RS232 INTERFACING
PRICE NEGOTIABLE
IF YOU WAN TO KNOW MORE PHONE ME AT 07984332015
MY EMAIL IS leeds_leisure@hotmail.co.uk
|
|
|
|
|
Right Place[^]
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKSQXUFYK[M`UKs*$GwU#(QDXBER@CBN%
Rs0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia>
--------------------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
|
You've come to the wrong place. We help people write their own code. We don't write it for you.
If you want someone to write an app for you, check out RentACoder.com.
|
|
|
|
|
Oh, and "Object Recognition", "AI", "Voice Recognition", "Face Recognition", ... are NOT small projects. Get out your checkbook becuase these apps take teams of people and they are not cheap. Some of the stuff you're talking about are still nothing more than research technologies and don't work very well in the real world, yet.
|
|
|
|
|
I notice you pointed him to rentacoder and not the CP Job Board ?
And yes, this is hilarious. Small projects indeed....
Christian Graus
Driven to the arms of OSX by Vista.
|
|
|
|
|
Christian Graus wrote: And yes, this is hilarious. Small projects indeed....
Now you know why I didn't point him at the job board. Someone who thinks those projects are "small" really doesn't have a grasp of what it takes to do them. So why put anyone here through the pain of dealing with a bad client?
|
|
|
|
|
WRITING IN CAPITAL LETTER IS THE TEXTUAL VARIANT OF SHOUTING!!
(Just to be clear, it's considered rude.)
I are troll
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
