|
the entire link:
<a href="'c:\prog\JORODOCBEHEER\documentbeheer.exe' ID=eID Arena">Klik hier om het document te zien</a>
|
|
|
|
|
OK, at the very least, you have to change the command line string. I think you'll have to replace the double-quote marks in this string with that HTML-friendly counterparts. But, the command line (inside the HREF quotes) should look more like (no single quote marks):
"c:\prog\JORODOCBEHEER\documentbeheer.exe" "ID=eID Arena"
Unless your intent is to pass 2 parameters to the .exe instead of one. The double quotes marks tell the shell to treat everything inside them as a single entity. This is because spaces are treated as a delimiter. So, in your original code, you are passing two parameters to the .exe.
|
|
|
|
|
I'm a bit further (after alot of trial and error)
I'm able to start the programme (there still is a warning box but that's not important)
However I'm not able to pass any parameters
The code that writes the html tag (its vba integrated into outlook):
<pre>
url = "file:///" & progpath
body = "Klant: " & Niv1Keuze.Text & "<br/>"
If Len(Niv2Keuze.Text & "") <> 0 Then body = body & "Niveau 2: " & Niv2Keuze.Text & "<br/>"
If Len(Niv3Keuze.Text & "") <> 0 Then body = body & "Niveau 3: " & Niv3Keuze.Text & "<br/>"
If Len(Niv4Keuze.Text & "") <> 0 Then body = body & "Niveau 4: " & Niv4Keuze.Text & "<br/>"
If Len(Niv5Keuze.Text & "") <> 0 Then body = body & "Niveau 5: " & Niv5Keuze.Text & "<br/>"
body = body & "<a href=""" & url & """>Klik hier om het document te zien</a>"
</pre>
this gives the html tag:
<a href="file:///c:\prog\JORODOCBEHEER\documentbeheer.exe">Klik hier om het document te zien</a>
This works but when I put a parameter after it I have the same problem as before.
I tryed to put the parameter between quote's, double quote's.
I tryed to put both the url and parameter between quote's, double quote's
I tryed using " (html code for ") and “ (html for left ")
Nothing worked
when I try to run the command (start - run)
I have to give in the following:
"file:///c:\prog\JORODOCBEHEER\documentbeheer.exe" "ID=Nieuw document - Klanten"
This works from start-run but when I put it in the html tag I get the openfiledialog box again
Any idea's would be very much apriciated (and thank you for your time and help so far)
|
|
|
|
|
Hii. I am currently trying to integrate a asp.net(VB) website with quickbooks. Below is the code.
Dim sessionManager As New QBSessionManager()
Dim requestMsgSet As IMsgSetRequest
Dim x As Integer
Try
sessionManager.OpenConnection2("", "QB Integration", ENConnectionType.ctLocalQBD)
sessionManager.BeginSession("C:\Program Files\Intuit\QuickBooks Accountant 2005\SA Outsourcing.QBW", ENOpenMode.omDontCare)
requestMsgSet = getLatestMsgSetRequest(sessionManager)
on the line
sessionManager.BeginSession("C:\Program Files\Intuit\QuickBooks Accountant 2005\SA Outsourcing.QBW", ENOpenMode.omDontCare)
it fails with "Could not start quickbooks"
Can someone please give me a reason for this. I've tried evrything I could think of user rights ect. and I have run the reboot.bat file as well nothing works
Stephen Lintott Bsc IT (RAU)
|
|
|
|
|
I wonder if the Quickbooks people have a forum where you can ask, as this appears to be an issue with their integration, not a general VB question. You may find someone here who knows the answer, I'm just thinking that a QB forum would have more in it.
Christian Graus
Driven to the arms of OSX by Vista.
"Iam doing the browsing center project in vb.net using c# coding" - this is why I don't answer questions much anymore. Oh, and Microsoft doesn't want me to.
|
|
|
|
|
Thanks
Stephen Lintott Bsc IT (RAU)
|
|
|
|
|
 Hi Everybody!
I have an excel file witch has created one button called "button1" and I´d like to remove it from an application made in vbnet 2005.
Anybody knows a solution to make it?
Thanks in advance
|
|
|
|
|
There should be an article here somewhere on codeproject ... look for "correctly hidding windowsxp start button" ... it should give you an idea about what you should do.
|
|
|
|
|
Hi
I have a VB6 ActiveX that displays a form with some controls: text box, buttons, radio buttons, Sheridan date control.
I call this form from a C# Windows form. This is done by a) adding a reference to the COM object b) instantiating the object c) Calling a method that displays the form.
The problem is that when the form is displayed, the controls style changes:
a) The text box becomes flat (not 3D)
b) The command button edges are rounded
c) The date control shows squares and funny shapes instead of numbers
d) The raduo buttons, that are located inside a frame, are black.
a and b are no big deal, c & d are obviously serious problem.
If I display the form from a C# console application then there is no problem: the controls look exactly as they do in the VB design. Also, if I compile the form to an EXE and call the EXE from a C# windows form, there is no problem.
It wasn't always like that: this problem started only recently, possibly as a result of Windows update, service pack... I am not sure what.
Does anyone know of a way to fix that, or some Windows settings to fix the problem?
|
|
|
|
|
Did you enable Visual Styles in your C# app?? Just a guess, but it's the only other thing I can think of that would change.
If you suspect it's a service pack or patch, build a test machine to verify this, without the suspected patches and service packs. THen add each one until the problem shows up.
|
|
|
|
|
Thanks for that Dave.
I didn't enable Visual Styles.
I did find that if I go to My Computer | Properties | Advanced | Performance | Visual effects , and turn off "Use visual styles on windows and buttons", then it solves the problem with most of the controls I mentiod - text boxes, buttons, radio buttons. The only control I have a problem with now is the Sherida Calander control. I will look for a solution for this one now.
|
|
|
|
|
Replacing the Sheridan date control (SSCalendarWidgets_A.SSDateCombo) with the Microsoft Date Picker (MSComCtl2.DTPicker) solves the problem. But now I noticed there is a similar problem with the Sheridan grid: when a line is edited, the content of the field in focus is garbage
|
|
|
|
|
Hello Guys!!!
I m doing a program base on AxMSChart now i m working on that. Here a problem arrived
When the row count is increase high then it is start flickering why it is happening some give me solution.
Now i m assigned it
AxMSChart.Rowcount=5000
Ananda.
|
|
|
|
|
non-bugging Errors wrote: When the row count is increase high then it is start flickering why it is happening
It happens because you're adding too much information to the chart control, probably more than what's needed to render the graph, and it's spending most of it's time processing and drawing all that data instead of showing the final graph image on the screen.
If you're using VB.NET, I highly suggest using a third party charting library, like ZedGraph[^].
|
|
|
|
|
or if using 3rd party tools is out of hand try ControlStyles.DoubleBuffer property. It should reduce the flickering.
|
|
|
|
|
Hi, I am in need of help, I am new to VB and crystal reports. I am having trouble with images on the report. For some reason, the image is blurry. I store the file path in sql2000 db and the image on the dev machine. I am retrieving and saving the image correctly (clear image) onto my local machine (this is a temporary path), but for some reason, the report displays the image blurry. I even tried to insert a fixed picture (which is also clear) but still get the same problem. So I am assuming, there's a problem with the way crystal reports is pulling in the image. Any ideas on how to fix this?
Any help is most appreciated.
Thanks
|
|
|
|
|
I have no idea how to fix it since I don't use Crystal Reports, but the problem is because the image is being scaled when displayed and CR is doing a bad job of it. Also, is your report picture larger than the size of the original image??
|
|
|
|
|
Hi,
I have to create a method which will be called for 5400 times roghly which creates a directory and put the data of the user in it.
For performance wise which one is good either
1. MkDir Left$(strPathName, lngPos)
2. Windows API or 3. FSO. which one gives more performance.
Whats the DLL to be included for Windows API?
Thanks,
Aleem Mohammad.
Thanks & Regards,
Md. Abdul Aleem
NIIT technologies
modified on Thursday, November 13, 2008 3:08 AM
|
|
|
|
|
|
Hi,
Can u please tell me which dll file should be enclosed to write this method or in which class "CreateDirectory()" function exists.
If possible some small code snippet.
Thanks,
Aleem Mohammad.
Thanks & Regards,
Md. Abdul Aleem
NIIT technologies
modified on Thursday, November 13, 2008 5:05 AM
|
|
|
|
|
|
Hi,
I am able to work it out with FileSystemObject as below but the same code I want to write with Windows API, can anybody please help me in sorting out this problem.
Dim fso As New FileSystemObject
Dim fold1 As Folder
If Not (fso.FolderExists("C:\Fold1")) Then
fold1 = fso.CreateFolder("C:\Fold1")
End If
Thanks,
Aleem Mohammad.
Thanks & Regards,
Md. Abdul Aleem
NIIT technologies
|
|
|
|
|
From the cycle "writing your code in 24 hours from scratches". Seriously take the time and read a few resources yourself rather than asking everything on forums. Not to mention the fact that if you dun really understand what's going on in the copied code you will be unable to debug it if something occurs. Then probably we'll get a new round of "questions".
|
|
|
|
|
Sorry friend it is completed but still I tried as a human I have to ask to others. Sorry if am disturbing u.
And thanks a lot for the help u all have given me.
Thanks a Lot,
Aleem Mohammad.
Thanks & Regards,
Md. Abdul Aleem
NIIT technologies
|
|
|
|
|
You're not disturbing us. We're just pointing out that your overcomplicating your code and your going to run into too many walls that you don't need to run into.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
