|
KarlWF wrote: and I always make a call to the GC (garbage collector) class
This should not be necessary. But, it seems you are leaking resources somewhere. Perhaps if you posted some code ?
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
Yup, avoid manual collection through the garbage collector. You may be inadvertantly promoting objects to a higher generation which makes it less likely they'll be garbage collected the next time you need it. But, overall it sounds like a memory leak.
|
|
|
|
|
Turns out I accidentally had been doing the following each time in the loop:
byte[] data = new byte[500000];
Could that be what was making the exception occur? I admit, when it comes to memory management I am very clueless, as I've not taught myself the inner workings of memory.
|
|
|
|
|
Well that's not it. When I test inter-network with my father, everything is ok.
However, when I connect to my friend 5 miles away, I get the exception out of memory. I am clueless as to why that would make a difference.
|
|
|
|
|
OK - ten I guess you need to consider that it could be related to your networking code ?
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
What I do is on a socket, I do a socket.Receive() and I put it into an already made buffer.
Then I save the buffer to a file, and read the file. I just am so confused as to how testing this over greater distances makes my memory exception come out quicker.
|
|
|
|
|
Apparently, if the image in in "invalid format" it will throw the OutOfMemory exception. I think this is likely the case. I will do some more testing to see if I can rid myself of it. However, I do appreciate the responses.
Thanks again 
|
|
|
|
|
Might the code run more often if it's a greater distance ? CAn you log that ?
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
I would think not. With the greater distance means a longer time waiting for the socket to receive data, and with greater latency means more waiting, means less repetitions in the loop I would think.
|
|
|
|
|
I have not seen the code, obviously, but if a greater distance causes it, then I'd wonder if a smaller packet size makes the code run more often for the same file size. Stabbing in the dark, here....
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
KarlWF wrote: I would think
Sure, but you would also think your program runs fine, except it does not.
There is a flaw somewhere, it could as well be in the things you think to be true.
Be alert for all kinds of things, gather facts, hence use logging as Christian suggested.
|
|
|
|
|
Hello
I have a problem.
if we have internet connection(gateway connection,not dial-up) for example by a adsl modem connecting to pc by usb, how can we disconnect and connect that connection in C#, i know how to test it's connected or it's disconected.
thank's alot.
pejman
|
|
|
|
|
Hello all,
I have a very simple program. All it does is browse for a file, calculate the sha1 hash and display it in a textbox. I have added an option in Windows context menu with the intention of right clicking on a file, choose an option like 'Get Sha1 Hash' and have the program calculate it. How do I do this? Based on what I've read, it seems that I would need the path for the file I right-clicked and probably pass that in as a parameter.
So I know two things: I know how to add something to the Windows Context Menu. I also know how to pass command-line parameters in the program. Currently all that is happening is the program starting normally when I right click on a file.
I hope I have expressed the problem clearly enough for anyone to understand.
Any help would be appreciated.
|
|
|
|
|
Does this[^] help ?
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
this one is in C#[^]
|
|
|
|
|
XD Oops.
The issue I had: Open and Save File Dialogs caused the program to exit.
Solution (in my case): Remove compatibility settings in Properties > Compatibilities.
modified on Monday, May 5, 2008 3:59 AM
|
|
|
|
|
Grass Cutting Sword,
Do you ever tell your program to exit/close for some reason? Do you use try{} catch{} for exceptions?
You'll need to provide more info, code etc, since we cant guess what it is from the above info.
Regards,
Gareth.
|
|
|
|
|
I didn't tell the program to close at all.
I used try/catch and it didn't show anything.
private void openToolStripMenuItem_Click(object sender, EventArgs e)<br />
{<br />
try<br />
{<br />
dlgO.ShowDialog();<br />
}<br />
catch(Exception z)<br />
{<br />
MessageBox.Show(z.ToString());<br />
}<br />
}
dlgO is the OpenFileDialog created using the Forms Designer.
|
|
|
|
|
Grass Cutting Sword,
When is "dlgO" created?
Regards,
Gareth.
|
|
|
|
|
Resolved.
It was a compatibility setting applied by windows. Windows 2000 + Dialogs = no fun.
Thanks for your help Gareth
modified on Sunday, May 4, 2008 4:45 PM
|
|
|
|
|
Please don't delete the question when it's resolved. Now noone else can benefit from the replies that you got.
Despite everything, the person most likely to be fooling you next is yourself.
|
|
|
|
|
I've been mucking around with embedding scripting languages in my (Windows/Desktop) applications with some success. I've looked at Script.Net which I thought was very impressive, and also IronPython and C# Script which have more, but to my mind have slightly too much for a light-weight scripting engine.
I got to wondering, however, about Java/ECMA Script as an ideal embedded language as it's possibly the most used scripting language in the world. Does anyone know of an implementation that can be embedded in .Net (not asp.net, which is what Google thinks I'm on about!) apps?
|
|
|
|
|
I successfully implemented a WSH (Windows Scripting Host) both in C++ and now in C#.
We do use VBScript as the scripting language for the templates in our Desktop CMS "zeta producer [^]". I published the interfaces here [^].
If I do understand correctly, it is simply a matter of switching the language to switch from VBScript to JavaScript (or other installed implementations like e.g. PerlScript).
|
|
|
|
|
Cool. I shall investigate
|
|
|
|
|
Hello,
As a result of my 1-st level of calculations, I'll get a 5 dimensional table of elements (each element is a structure with 4 integers inside). Those elements will be used for next level calculations (they had to be precalculated to save time for recalculating the sam values in each iteration). Length of each table dimension will be 52 ( so I'll have: myArray = new myElement[52,52,52,52,52]; )and I'll need to access the elements of it as quickly as possible by referring to table indexes for each dimension (as I have written, this will be input for next calculation and optimization is necassary)
The problem is that the table is too large:(52^5) * 2 bytes(sizeof int) * 4(ints in the structure) = 2.83274078 gigabytes, so I cannot keep it in RAM (I have only 1 gig).
I was thinking about putting the results from 1-level calculations directly to 3Gig binary file (this would save me recalculationg the array each time the programs starts), but I am not sure if seeking the proper element + harddrive delay will be quick enough solution.
Just to get the idea, I need to perform a simulation of about 1 000 000 000 000 iterations, where I'll use the values from the table (which contains a result of all combinations of cards - one card can be used 5 times)
Any ideas how can I handle this problem?
Many thanx for the help!
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
