|
I create an XML document using the following:
XmlDocument doc = new XmlDocument();
doc.LoadXml(WeatherProxy.NDFDgen(dlatitude, dlongitude, gov.weather.www.productType.timeseries, System.DateTime.Now, System.DateTime.Now.AddDays(7) ,WeatherParameters));
doc.Save("../../forecast.xml");
Everything works great and the data requests are very flexible. WeatherParameters contains about 20 different bools for parameters.
The xml file is loaded with DATA!
Anyway, the nodes for the specific data like daily high temp for example are matched with time-span key-layout nodes. I need to match these keys that tell the datetime with the proper parameters. The data can contain many variable keys and parameters.
I need some ideas for grouping and manipulating this data so I can write a class, struct, array... whatever to organize it. Here's a snippet of the xml doc.
<time-layout time-coordinate="local" summarization="none">
<layout-key>k-p3h-n19-12
<start-valid-time>2007-10-22T14:00:00-04:00
<start-valid-time>2007-10-22T17:00:00-04:00
<start-valid-time>2007-10-22T20:00:00-04:00
<start-valid-time>2007-10-22T23:00:00-04:00
<start-valid-time>2007-10-23T02:00:00-04:00
<start-valid-time>2007-10-23T05:00:00-04:00
<start-valid-time>2007-10-23T08:00:00-04:00
<start-valid-time>2007-10-23T11:00:00-04:00
<start-valid-time>2007-10-23T14:00:00-04:00
<start-valid-time>2007-10-23T17:00:00-04:00
<start-valid-time>2007-10-23T20:00:00-04:00
<start-valid-time>2007-10-23T23:00:00-04:00
<start-valid-time>2007-10-24T02:00:00-04:00
<start-valid-time>2007-10-24T05:00:00-04:00
<start-valid-time>2007-10-24T08:00:00-04:00
<start-valid-time>2007-10-24T11:00:00-04:00
<start-valid-time>2007-10-24T14:00:00-04:00
<start-valid-time>2007-10-24T17:00:00-04:00
<start-valid-time>2007-10-24T20:00:00-04:00
<time-layout time-coordinate="local" summarization="none">
<layout-key>k-p12h-n9-13
<start-valid-time>2007-10-22T20:00:00-04:00
<start-valid-time>2007-10-23T08:00:00-04:00
<start-valid-time>2007-10-23T20:00:00-04:00
<start-valid-time>2007-10-24T08:00:00-04:00
<start-valid-time>2007-10-24T20:00:00-04:00
<start-valid-time>2007-10-25T08:00:00-04:00
<start-valid-time>2007-10-25T20:00:00-04:00
<start-valid-time>2007-10-26T08:00:00-04:00
<start-valid-time>2007-10-26T20:00:00-04:00
<parameters applicable-location="point1">
<temperature type="maximum" units="Fahrenheit" time-layout="k-p24h-n7-1">
<name>Daily Maximum Temperature
<value>81
<value>83
<value>70
<value>77
<value>77
<value>78
<value>76
<temperature type="minimum" units="Fahrenheit" time-layout="k-p24h-n6-2">
<name>Daily Minimum Temperature
<value>68
<value>60
<value>58
<value>59
<value>57
<value>56
layout-key and time-layout must be matched. I hope someone has dealt with something similar and can help.
Thanks
Ken
|
|
|
|
|
Ummm... what? Are there XML tags that aren't showing up? Should you have clicked "Ignore HTML tags in this message (good for code snippets)" ?
|
|
|
|
|
Yeah I checked the little box and still it wont show the tags...
I try it here again maybe this will work
<time-layout time-coordinate="local" summarization="none">
<layout-key>k-p3h-n19-12</layout-key>
<start-valid-time>2007-10-22T14:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-22T17:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-22T20:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-22T23:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T02:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T05:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T08:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T11:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T14:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T17:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T20:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T23:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-24T02:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-24T05:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-24T08:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-24T11:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-24T14:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-24T17:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-24T20:00:00-04:00</start-valid-time>
</time-layout>
<time-layout time-coordinate="local" summarization="none">
<layout-key>k-p12h-n9-13</layout-key>
<start-valid-time>2007-10-22T20:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T08:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-23T20:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-24T08:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-24T20:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-25T08:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-25T20:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-26T08:00:00-04:00</start-valid-time>
<start-valid-time>2007-10-26T20:00:00-04:00</start-valid-time>
</time-layout>
<parameters applicable-location="point1">
<temperature type="maximum" units="Fahrenheit" time-layout="k-p24h-n7-1">
<name>Daily Maximum Temperature</name>
<value>81</value>
<value>83</value>
<value>70</value>
<value>77</value>
<value>77</value>
<value>78</value>
<value>76</value>
</temperature>
<temperature type="minimum" units="Fahrenheit" time-layout="k-p24h-n6-2">
<name>Daily Minimum Temperature</name>
<value>68</value>
<value>60</value>
<value>58</value>
<value>59</value>
<value>57</value>
<value>56</value>
</temperature>
I love programming!
|
|
|
|
|
Well that looks better. But I don't see how the elements relate. Looks like there's plenty of documentation on their site though.
|
|
|
|
|
The elements relate through the layout keys. You match each data element within a node to the corresponding key-layout. I already figured out how to match these suckers. I am having trouble coming up with a plan to load the data so that I can sort each data item with the time frame it matches. I came up with some ideas last night but when I change something in the request like the number of days or something it throws everything off.
I thought about a class where the code holds for one day...but some of the time spans are like 8:00am to 2:00pm and others are from 6:00am to 8:00pm and such. Those suckers dont match.
I'll eventually figure out a scheme to load this data and sort it usefully. Ive just been stuck on this for a day or so and that doesnt usually happen any more. Maybe I'm getting too old for this stuff. lol
Thanks for your help.
I love programming!
|
|
|
|
|
Hello people!
Im making a little game with SDL.NET. And because I want to spread my game, I ship all the dll's, now my folder is filled with dll's, and it is not looking neat. Is there a way to combine them ( resource for example ) and use them ? Or put them in a folder called "depencies" for example ?
All .NET dll's can I combine with Netz, so that is not a problem, the unmanged dlls are  .
Good night!
|
|
|
|
|
using System;
using System.Collections.Generic;
using System.Text;
namespace ColinAngusMackay.NumbersInWords
public class English
{
public static string NumberToEnglish(int number)
{
// Special case for zero
if (number == 0)
return "zero";
// Special case for int.MinValue.
if (number == int.MinValue)
return "negative two billion one hundred and forty seven million " +
"four hundred and eighty three thousand six hundred and forty eight";
// set up possible prefix for negative numbers
string prefix = "";
if (number < 0)
prefix = "negative ";
int absNumber = Math.Abs(number);
return string.Concat(prefix,
TranslateOneToTwoBillionOneHundredAndFortySevenMillionFourHundredAndEightyThreeThousandSixHundredAndFortySeven(absNumber));
}
private static string TranslateOneToTwoBillionOneHundredAndFortySevenMillionFourHundredAndEightyThreeThousandSixHundredAndFortySeven(int number)
{
if (number < 1000000000)
return TranslateOneToNineHundredAndNintyNineMillionNineHundredAndNintyNineThousandNineHundredAndNintyNine(number);
int billions = number / 1000000000;
string result = string.Concat(TranslateOneToNineteen(billions), " billion");
int remainder = number % 1000000000;
if (remainder == 0)
return result;
if (remainder < 100)
return string.Concat(result, " and ", TranslateOneToNinetyNine(remainder));
return string.Concat(result, " ",
TranslateOneToNineHundredAndNintyNineMillionNineHundredAndNintyNineThousandNineHundredAndNintyNine(remainder));
}
private static string TranslateOneToNineHundredAndNintyNineMillionNineHundredAndNintyNineThousandNineHundredAndNintyNine(int number)
{
if (number < 1000000)
return TranslateOneToNineHundredAndNinetyNineThousandNineHundredAndNinetyNine(number);
int millions = number / 1000000;
string result = string.Concat(TranslateOneToNineHundredAndNinetyNine(millions),
" million");
int remainder = number % 1000000;
if (remainder == 0)
return result;
if (remainder < 100)
return string.Concat(result, " and ",
TranslateOneToNinetyNine(remainder));
return string.Concat(result, " ",
TranslateOneToNineHundredAndNinetyNineThousandNineHundredAndNinetyNine(remainder));
}
private static string TranslateOneToNineHundredAndNinetyNineThousandNineHundredAndNinetyNine(int number)
{
if (number < 1000)
return TranslateOneToNineHundredAndNinetyNine(number);
int thousands = number / 1000;
string result = string.Concat(TranslateOneToNineHundredAndNinetyNine(thousands),
" thousand");
int remainder = number % 1000;
if (remainder == 0)
return result;
if (remainder < 100)
return string.Concat(result, " and ",
TranslateOneToNinetyNine(remainder));
return string.Concat(result, " ",
TranslateOneToNineHundredAndNinetyNine(remainder));
}
private static string TranslateOneToNineHundredAndNinetyNine(int number)
{
if (number < 100)
return TranslateOneToNinetyNine(number);
int hundreds = number / 100;
string result = string.Concat(TranslateOneToNineteen(hundreds),
" hundred");
int remainder = number % 100;
if (remainder == 0)
return result;
return string.Concat(result, " and ", TranslateOneToNinetyNine(remainder));
}
private static string TranslateOneToNinetyNine(int number)
{
if (number < 20)
return TranslateOneToNineteen(number);
int units = number % 10;
int tens = number / 10;
string result = "";
switch (tens)
{
case 2:
result = "twenty";
break;
case 3:
result = "thirty";
break;
case 4:
result = "forty";
break;
case 5:
result = "fifty";
break;
case 6:
result = "sixty";
break;
case 7:
result = "seventy";
break;
case 8:
result = "eighty";
break;
default:
result = "ninety";
break;
}
if (units != 0)
result = string.Concat(result, " ", TranslateOneToNineteen(units));
return result;
}
private static string TranslateOneToNineteen(int number)
{
switch (number)
{
case 1:
return "one";
case 2:
return "two";
case 3:
return "three";
case 4:
return "four";
case 5:
return "five";
case 6:
return "six";
case 7:
return "seven";
case 8:
return "eight";
case 9:
return "nine";
case 10:
return "ten";
case 11:
return "eleven";
case 12:
return "twelve";
case 13:
return "thirteen";
case 14:
return "fourteen";
case 15:
return "fifteen";
case 16:
return "sixteen";
case 17:
return "seventeen";
case 18:
return "eighteen";
default:
return "nineteen";
}
}
}
}
***the program want to convert the numbers in to characters
-- modified at 18:18 Tuesday 23rd October, 2007
|
|
|
|
|
The subject line is supposed to be a short description, not a complete sentence.
When posting code, use the pre tag to preserve the formatting.
When posting code, keep it short.
What error are you talking about? Do you get an error message?
---
"Anything that is in the world when you're born is normal and ordinary and is just a natural part of the way the world works. Anything that's invented between when you're fifteen and thirty-five is new and exciting and revolutionary and you can probably get a career in it. Anything invented after you're thirty-five is against the natural order of things."
-- Douglas Adams
|
|
|
|
|
Guffa wrote: Do you get an error message?
one? how about a few dozen, including complaints about missing breaks...
Luc Pattyn [Forum Guidelines] [My Articles]
this months tips:
- use PRE tags to preserve formatting when showing multi-line code snippets
- before you ask a question here, search CodeProject, then Google
|
|
|
|
|
to start your namespace is there but a class within it comes before the opeing "{" bracket and the ending one is already there.
IE you have
namespace mynamespace
class myclass
{
}
}
when you should have
namespace mynamespace
{
class myclass
{
}
}
second there isn't a static void Main(string[] args) { } function and this appears to be a console application (not using widows form classes) and only one class, then your class requires a Main function for the windows entry point into your code
after adding
static void Main(string[] args)
{
Console.WriteLine(NumberToEnglish(10002));
}
worked for me. if you have issues then you can put a break where you call it then step though it with the debugger it is easy to spot
Run it with [F5] with a break at the start of the call of convert then step-into it with [F11] then step through with [F10] looking at the auto, till you see an error. Break before the error then reset with [Shift]+[F5] then [F5] and [F5] again to goto the new break. Press [F11] to step into the code area where your error was repeat till you see the mistake.
also I don't think "TranslateOneToTwoBillionOneHundredAndFortySevenMillionFourHundredAndEightyThreeThousandSixHundredAndFortySeven()" is a very good choice for a function name 
-- modified at 18:50 Tuesday 23rd October, 2007
|
|
|
|
|
Thanks for the material....
Christian Graus - Microsoft MVP - C++
"also I don't think "TranslateOneToTwoBillionOneHundredAndFortySevenMillionFourHundredAndEightyThreeThousandSixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it )
|
|
|
|
|
Truely, a "coding horror" if I ever saw one! 
|
|
|
|
|
Dave Kreskowiak wrote: Truely, a "coding horror" if I ever saw one!
 Oops! I didn't think anyone would take that code so seriously...
|
|
|
|
|
At least with crazy function names it becomes easy to see who copies my code.
|
|
|
|
|
Hi All,
I have a data base, and a C# application.
my application need to import and export the database from and to a XML file.
One of my tables have a DATETIME field, when I try to import from the XML to the DB I got the following error: "Conversion failed when converting datetime from character string."
What should I do?
Thanks in advance for your kind help.
|
|
|
|
|
How are you importing from the XML to DB? You may need to use DateTime.Parse to convert the date string in the XML file
only two letters away from being an asset
|
|
|
|
|
Hi Gang,
I've got an app that I built with ASP linked to a MySQL database (oh please save your BOO's ). I have a field that is encrypted with a salt value, and uses the MySQL AES_Encrypt() and AES_Decrypt() methods. The data must be stored in an ecrypted fashion, use a salt value to be re-used to decrypt it later.
Recommendations?
Thanks.
--
There are only 10 types of people in the world: Those who understand binary, and those who don't.
|
|
|
|
|
Recommendations for what?? You said you already have this stuff, so I fail to see the point of the question.
|
|
|
|
|
Encrypt/Decrypt with a salt value - not one-way encryption like MD5 one-way encryption.
Thanks.
--
There are only 10 types of people in the world: Those who understand binary, and those who don't.
|
|
|
|
|
That doesn't help. I figured that much. I still don't have a clue what you're after...
Are you looking to implement this in SQL Server instead?? (Your subject line mentions SQL Server)
Are you looking for hepl on using the MySQL functions?? A better source of information on tht would be a forum dedicated to MySQL, not C#.
Or are you looking for an entirely C# implementation of a two-way encryption, storing the encrypted value in a database field??
|
|
|
|
|
Dave,
Sorry about that. Let me clarify. I am looking for a C# implementation of a two-way encryption algorythm which uses a salt value.
I'm porting an application's data-store from MySQL to SQL Server.
Thanks!
--
There are only 10 types of people in the world: Those who understand binary, and those who don't.
|
|
|
|
|
What I want to do is to use the shadow service to deal with in-use files when backing up with 7zip.
At the moment my 7zip implementation is merely to launch 7zg with command line parameters from within my C# app. I'm using NTBackup to deal with locked files but I don't want to depend on it due to compatibility issues (no NTBackup in Vista).
So I need a way to create a shadow copy, then 7zip from it. I don't care if it's more command line tools, I just don't have a clue where to start really.
|
|
|
|
|
Extremely difficult at best. There is no managed wrapper for the Shadow Copy Service and the COM exports are spotty at best at this point. You'd be better off writing a wrapper in C++/CLI to expose the functionality you want, then consuming that in a managed code app written in VB.NET or C#.
|
|
|
|
|
i need a program immediately to read and display an image using c code
pls help
dhariiiiiiiii
|
|
|
|
|
You'd better hurry up and write one then...
Paul Marfleet
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
