|
Thanks very much. I didn't know that before.
|
|
|
|
|
how do i get the focus to change from a textbox to a button so that i dont have to keep moving my mouse around?
whenever i finish typing my entry into the textbox,
i want my focus to move over to the execute button so that the button will take action when i press "enter"
a little help would be nice
|
|
|
|
|
ricebowl09 wrote: uhm hey ive got a question
And that sets your post apart from the others in this forum ? A meaningful subject can attract people who can help you.
ricebowl09 wrote: how do i get the focus to change from a textbox to a button so that i dont have to keep moving my mouse around?
You need to capture the fact that you've finished typing. You can do that one of several ways. The most obvious is to handle the focus lost event of the textbox and move the focus to the button. Actually, if the button is the default for the form, I think enter will press it for you.
The other ways I can think of, are bound to drive your users mad. You shouldn't just magically move the focus to a button. You could handle the tab keypress and make it move the focus ( that happens for most controls, but for hte textbox, I think it usually just enters a tab ( as you'd hope )
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
hi,
suppose your textbox & button have name txtFocus and cmdExecute then use following code at keyprees event of txtfocus
Private Sub txtFocus_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles txtFocus.KeyPress<br />
If e.KeyChar = Chr(13) Then<br />
cmdExecute.Focus()<br />
End If<br />
End Sub
hope this helps
Rupesh Kumar Swami
Software Engineer,
Integrated Solution,
Bikaner (India)
|
|
|
|
|
Rupesh Kumar Swami wrote: Chr(13)
It would be far better to use Keys.Enter and check the Keys variable.
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
yes sir,
this is also a way(i think it is better)
but sir there are a lot of way to doing this thing & what option we accept , its depend on our skills
Rupesh Kumar Swami
Software Engineer,
Integrated Solution,
Bikaner (India)
|
|
|
|
|
I find it simplest to se the tab order of the objects on the form to the correct flow and to disable the tabstop property on objects that do not need focus.
Set the cancel and where appropriate the accept buttons for the form.
Let the form do the rest!
Don't forget to explicitly cole the form rather than relying on the dialogresult - there used to be an annotying flash on the form in 1.0
|
|
|
|
|
recently i moved my website from unix hosting to windows hosting that only supports IIS and not apache. in the site i have a folder called /registered_users which can contain basically any sort of file. now since the .htaccess script handler is not there everyone can go access the file. the username and passwords are about 500 and password obviously is encrypted. I have a sql table that has unencrypted user/pwd now how could i create sumthing similar to what was there earlier. there are like hundreds of html pages within that folder which are added/deleted automatically.
I simply want to give access to entire folder if they login successfuly.
please help
|
|
|
|
|
Sounds like a question totally unrelated to VB.NET, have you tried the web dev forum ?
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
Hello,
I have a datagridview and I have put a combobox column using the designer.
I have set the properties for the datapropertyName, datasource, display member, and view member.
I have used the binding source and have filled when the form loads. The contents are all displayed in the combo box. This part is working ok
I have used the below to fill the binding source.
'Fill the incidents<br />
Private Sub FillIncidents()<br />
Try<br />
Me.TA_Incident_dsComponent_Equipment.Fill(Me.DsAddComponetAndEquipment.Incident)<br />
<br />
Catch ex As Exception<br />
MsgBox(ex.Message)<br />
End Try<br />
End Sub
My problem is that combo box will be filled with all the incidents that are in the database table. But I want to have a "None" option if the user doesn't want to select any incident.
The incidentID is an identity seed and is incremented each time a new incident is added. So I just can't add a new false record with a "None" field.
I didn't notice any text property in the designer when I added the combobox column. I thought I could set the initial text property to display "None".
Is there any method to do this?
Many thanks for understanding my question and any suggestions.
Steve
|
|
|
|
|
Probably the best option is to add a new record with an id of "0" or any other number (but i like to use 0's) and a description of "None" to your datatable, for this, turn of the autoincrement and insert that reord, then turn autoincrement on again
To just display none when no incident is selected:
In the columns designer, select the comboboxcolumn and click in the DefaultCellStyle, in the new window that will open, set the NullValue property to "None" or anything youwant to display
I hope you choose the first option
Alexei Rodriguez
|
|
|
|
|
hi
please tel me how can i use a class or library or code for changing the contrast and sharpness of an image?
warm regards
|
|
|
|
|
You'll either have to use a third party image manipulation library or write one yourself in C# or C++. VB.NET can do it, but doesn't support pointers, so it's very slow at it.
Search the articles for "Image Processing for Dummies" for some examples by Christian Graus.
|
|
|
|
|
There's a VB.NET sample program called 'Fotovision', from Microsoft. It shows how to do contrast using built in GDI+ stuff. I've not seen an approach for sharpness that doesn't involve using C#, as per my articles ( thanks for the plug, Dave :P )
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
hi
i have a form with three numericupdown control and two text box and i bound that controls to a sql data source with a table adapter, how can i change and update the values of that controls in data base?
warm regards
|
|
|
|
|
Call the EndEdit method on your BindingSource object then call the Update method on your TableAdapter.
|
|
|
|
|
thank you for reply but
i use this method but there is some thing wrong and and error code has been generated when i use it the error is : update requires a valid update command when passed datarow collection with modified rows.
where the problem?
|
|
|
|
|
There are three common causes of this problem.
Either the TableAdapter was configured to use a stored procedure in your database, or the adapters GenerateDBDirectMethods property is set to False, or the table doesn't have a primary key uniquely identifying each row in the table.
If your SQL for the adapter is merely using the results of a stored procedure, you'll have to change the TableAdpater and give it the SQL commands (UPDATE, INSERT, DELETE) to use to update each row in the database from the changes in your datatable/dataset.
Fixing the GenerateDbDirectMethods problem is easy. All you have to do is change the checkbox in the Dataset Designer and resave the dataset to recreate the TableAdapter.
If your database table doesn't have a primary key, you'll have to add one to use the TableAdapter.
|
|
|
|
|
I need to write a script that will run every time someone tries to log off or shutdown a computer. In the past people have logged off computers while QE testing or automation on virtual machines were running. So it would always be a real pain when these VMs were shut off without warning. I need to write a script that would check for VMware’s executable file (vmware-vmx.exe) and (if the process is found) prompt a warning to the user and stop them from shutting down or logging off.
I’ve done A LOT of research on the internet about logoff/shutdown scripts, posted on message boards and I’ve emailed people that I know. However, I haven't been able to find any examples. I’ve found three different API calls/messages and I really don’t know which one I should use. I can’t move forward with my scripts until I do:
AbortSystemShutdown - This call aborts a shutdown initiated by InitiateSystemSutdown or InitiateSystemShutdownEx calls. ASS is thrown during the timeout period specified by ISS or ISSE. I don’t know if it will work for the console session since ISS and ISSE are only used in RDP connections.
ExitWindowsEx - Can shutdown, logoff, or restart a computer and pass reasons to the event log as to why any of these happened. I havn't found an API that aborts this call. I know that EWE sends the WM_QUERYENDSESSION message which can potentially abort a logoff/shutdown if the a value of “0” is returned. How do I respond to this message with “0”? I haven’t found any examples.
SystemEvents.SessionEnding - Can cancel shutdown
My qualms: can’t cancel logoff and too many caveats: console apps don’t raise this event, cancel only works sometimes, and there’s no guarantee this event will fire before the closing event fires.
I would really appreciate some help and feedback.
P.S. Just in case your wondering, I’m aware of the fact that I can’t directly call an API from a script and that I have to use either MS Office as proxy to load the code into a macro to make the calls or use an ActiveX control to act as a wrapper to make the calls
|
|
|
|
|
This isn't going to be a very helpful answer, I'm afraid, but if the VMs need to be running independently of the user, and can be interrupted by a user logging off or shutting down his machine, why are they being run on the user's machine at all? Stick a copy of VMWare server (free) on a server in the corner of the room somewhere and make everyone RDP to the machine. Set the RDP policies to disallow people shutting down the box, and job done.
|
|
|
|
|
Though Craster's solution is the way it should actually be, if you don't/can't/won't do it that way you can use the System.Diagnostics.Process namespace and search for that process and see if it's running in the task manager, if it's found then warn the user, such as:
Public Function IsProcessRunning(ByVal sProcessName As String) As Boolean
For Each clsProcess As System.Diagnostics.Process In System.Diagnostics.Process.GetProcesses
If clsProcess.ProcessName.Contains(sProcessName) Then
Return True
Else
Return False
End If
Next
End Function
Then you can call it like this:
If IsProcessRunning("vmware-vmx") Then 'Leave the .exe off
MessageBox.Show("VMWare is currently running. Please log off of VMWare before shutting down",,"Critical Process Running", _
MessageBoxButtons.OK,MessageBoxIcon.Error,MessageBoxDefaultButton.Button1,MessageBoxOptions.ServiceNotification,False)
Else
'Else do your processing here
End If
|
|
|
|
|
Trust me, I would much rather do it Craster's way since almost all of the QE testing is done through RDP connections anyway but that's not an option. My manager wants a script and I was told by two colleagues of mine at other companies that removing the standard logoff/shutdown methods is not something I should do in a production environment.
Thank you Psycho Extreme for giving me the code but I still don't know which call I should use so I can't move forward. I've searched microsoft groups, google groups and so many scripting websites and message boards, and no one seems to know the call and/or no one seems to have attempted this before. There arn't any examples out there. I don't know how I'm going to figure this out. In the meantime I have another question for any of you out there:
Is it possible to intercept another program's WM_QUERYENDSESSION message? If I was to go this route to abort shutdown, that's what I would need to do, right? Whenever someone tried to logoff/shutdown, my script would run everytime via group policy, check for VMware's executible, and, if found, intercept VMware's WM_QUERYENDSESSION message to return "0" so that the OS wouldn't shutdown or logoff. Now that I think about it, that's actually starting to sound like something a hacker would come up with. I don't want to go there. That sounds like high level programming which I can't learn in a month (when this project is due) and I don't even think I could do that in a script.
Forget that first question. Try and answer this: Would I have to intercept VMware's WMQ message or can I send this message directly from my script if VMware's executible is found? Sorry for these hard questions. I'm just trying to figure this out.
|
|
|
|
|
Hello
How to get image from server into imagebox when clicking button? So what is the code I need to write in button? I am making a web page.
|
|
|
|
|
Do NOT repost the same question again and again in the same day. It'll just get you ignored for being impatient. We come here to answer questions in our SPARE TIME, not on your demands.
If you're making an ASP.NET web application (Web Forms), then ask your question in the ASP.NET Forum.
I'm not expert in ASP.NET apps, but I would imagine it has something to do with Server.MapPath().
|
|
|
|
|
porsti wrote: How to get image from server into imagebox
Are you referring to the web server, a SQL server, need more information for this request. You can also Google[^] your question as well and finds lots of sample code.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
