|
i got it
the solution is:
select so.name from sysobjects so where so.type='U'
i dont need ur help and thanks to the others
Thanks alot
Hamody
|
|
|
|
|
I'm glad you worked it out. Remember, like I said, this is a platform specific solution.
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
|
|
|
|
|
Native C# Protection (NCSP) is a protection tool (not obfuscator) for C# 2.0 applications.
The goal of NCSP is to produce trial versions with limited functionality of C# applications.
With the correct NCSP Key these applications work as registered versions.
NCSP uses only NATIVE (but peculiar) TO C# means, i.e. NO EXTERNAL PROCESSING
of C#-produced executable.
NCSP protects NOT CODE, BUT DATA needed to run the application.
In case of C# applications DATA IS A CORRESPONDENCE BETWEEN EVENTS AND EVENT
HANDLERS.
The difference between trial and registered versions produced by NCSP is based
on use of DIFFERENT EVENT HANDLERS FOR TRIAL AND REGISTERED VERSIONS of the
protected application. The trial version uses one set of event handlers, while
the registered version uses another one.
NCSP protects forms of C# project on the source level, i.e. NCSP temporarily
MODIFIES THE SOURCE CODE, then, AFTER RE-COMPILING, THE APPLICATION IS
PROTECTED.
During the process of protection NCSP MODIFIES THE SOURCE CODE of the form in
such a manner that after re-compiling each protected event has no event handler
assigned. During the protected application start TRIAL EVENT HANDLERS ARE
ASSIGNED TO THE CORRESPONDING EVENTS. If valid NCSP Key is
provided then REGISTERED EVENT HANDLERS REPLACE THE TRIAL ONES.
The protected application DOES NOT USE a call of some CHECKING ROUTINE to
choose which set of event handlers to use. Instead it USES DATA containing in
NCSP Resource and in NCSP Key TO ASSIGN REGISTERED EVENT HANDLERS TO THE
CORRESPONDING EVENTS.
NCSP trial version may be downloaded from http://www.posolsoft.com/files/NCSP2/NCSP.zip
More information about NCSP may be found at http://www.posolsoft.com/NCSP
Oleg Subachev
oleg@posolsoft.com
|
|
|
|
|
Sounds awesome. If your product is so great, then you should consider contacting the site admin to organise to post advertisements on this site. Spamming the boards like this will lose you more business than it gains you.
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
|
|
|
|
|
Hi all
in my application i need to desply output in CommandPrompt..
and also i need to take the commands which r desplayed in command prompt..
please can u let me know.
How to desply Output in CommandPrompt....In WINDOWS APPLICATION
Thnk in advance
prashanth,
s/w Engineer,
Syfnosys.
|
|
|
|
|
Hello,
Means can i know why do you want to do that?
nishu
|
|
|
|
|
i am developing this for my client where in which,
a leser beam interact with the device which is connected to system, i need to take the input from Console(command prompt)--which is a partial output of my appliatin
and depending upon the input(which will be given by user in cmd prompt) i need to frame tables,waves etc...PRogramatically
prashanth,
s/w Engineer,
Syfnosys.
|
|
|
|
|
Hello prashanth ,
I dont know If I am getting correctly,
means your application is interacting with one seperate console window from which you have to take input and to the same window you have to show the output correct??
nishu
|
|
|
|
|
its not exactly...
see in my application i have a submit button in my window form,
when i run my application.i mean in run time when i click button --COMMAND ) should be capable of taking input which typed in cmd prompt.
got?
please help me...nishu
prashanth,
s/w Engineer,
Syfnosys.
|
|
|
|
|
Prashanth,
I got now ,but just one question more only one console window is there during runtime of your application?????i willl reply soon the solution .
nishu
|
|
|
|
|
Hi nishu,
did u found the solution...
here i am with one more requist...
please tell me, where do i get a tool?
I Want a tool which takes input values from the developed Commandprompt.
and this tool should be capable of convert these values in to sin waves,CW, or gauges..etc forms.
I hope u got my requirement. please help me with reference.
thnx in advance,pashi.
prashanth,
s/w Engineer,
Syfnosys.
|
|
|
|
|
Following is the code ....
But problem is that ir works only in framework 2.0
System.Diagnostics.Process pr = new System.Diagnostics.Process();
pr.StartInfo.WindowStyle = System.Diagnostics.ProcessWindowStyle.Normal;
pr.StartInfo.FileName = "cmd.exe";
pr.StartInfo.UseShellExecute = false;
pr.StartInfo.RedirectStandardInput = true;
pr.StartInfo.RedirectStandardOutput = true;
pr.Start();
pr.OutputDataReceived += new System.Diagnostics.DataReceivedEventHandler(pr_OutputDataReceived);
pr.BeginOutputReadLine();
System.IO.StreamWriter swWriter = pr.StandardInput;
swWriter.WriteLine("echo SomeTextHere\n");
swWriter.Flush();
...
//Define a delagate function
delegate void SetTextCallback(string text);
//Define a function for setting
void SetText(string text)
{
if (this.textBox1.InvokeRequired)
{
SetTextCallback d = new SetTextCallback(SetText);
this.Invoke(d, new object[] { text });
}
else
{
this.textBox1.Text = text;
}
}
void pr_OutputDataReceived(object sender, System.Diagnostics.DataReceivedEventArgs e)
{
//event fired and u have data use it thread-safe
SetText(e.Data);
}
Rahul Kulkarni
|
|
|
|
|
hi,all
how can i drag a line with mouse from a point to another
and it is extended whenever i drag it with mouse
thanx
|
|
|
|
|
If you want the line to disappear when the mouse is lifted, use the CreateGraphics method to draw it, otherwise you need to handle the paint event. Either way, you want to handle the mouse down, mouse move and mouse up events, you need to store the position where the mouse went down, and keep painting new lines from there to where they mouse is as you move it.
What do you want to achieve ?
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
|
|
|
|
|
hi, Christian
i donot want it to disappear but tie two points (actually two images) and when i move image the line extended
|
|
|
|
|
What do you mean, two images ? What do you want to do ?
If you want to draw two lines that persist, you need to handle the paint event, then when you call Invalidate(), the paint event will redraw your form. Store a bool to say if the mouse button is down, and two points, one for each end of the line. Set both to the current mouse pos when the mouse goes down, set one to the mouse position when it moves, and in your paint event, draw a line between them, if the mouse is down ( via that flag you set )
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
|
|
|
|
|
thanx Christian
about ur question
iam making a mobile simulator project and i want to tie
for example mobile node with base station node
thanx alot
generator
|
|
|
|
|
OK, that's a little more complex, you need to then store the locations of 'objects' you want to draw lines between ( assuming you don't want to allow arbitrary lines to be drawn ).
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
|
|
|
|
|
( assuming you don't want to allow arbitrary lines to be drawn ).
what is the mean of this
generator
|
|
|
|
|
You want lines to only be drawn between components, or just anywhere that people feel like it ?
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
|
|
|
|
|
In my application I need to use a timer. Depending on it the text of a Label control must be changed and when the time counter reaches the value of '0' an event must happen.
Now so far I wasn't even able to change the value of Label Text property.
I can't figure out what is wrong. Samples I tried from books and MSDN worked just fine, but not the timer in my application. All I get is an infinite 'while' loop. This is the code I used:
this.countDownTimer.Enabled = true;
while(this.timeCounter > 0)
{
this.countDownTimer.Tick += new EventHandler(this.countDownTimer_Tick);
}
this.countDownTimer.Enabled = false;
private void countDownTimer_Tick(object sender, EventArgs e)
{
this.timeCounter--;
this.lblTimeLeft.Text = timeCounter.ToString();
}
Would someone be so kind to help me with this. I have wasted a full day trying to make it work but no luck so far. Thank you!
|
|
|
|
|
vitaco wrote: while(this.timeCounter > 0){ this.countDownTimer.Tick += new EventHandler(this.countDownTimer_Tick); }
If timerCounter > 0, then your loop will run forever, as nothing is going to decrement it. also, your tick event is going to have many, many events tied to it ( that function will be called over and over ).
I think you're confusing timers and threads. Your timer will try to run, but it won't be able to, because your while loop will be eating the processor time.
Also, only set the tick event once, setting it more than once causes the function to be called over and over. Just remove the while loop, and start the timer ( you don't even to that, as far as I can see ), and it should work fine.
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
|
|
|
|
|
Well, I removed the 'while' loop. When I run the Debug mode I can see (as previously) that the line "this.countDownTimer.Tick += new EventHandler(this.countDownTimer_Tick)" never leads to execution of "countDownTimer_Tick". The lines of code
timeCounter--;
this.lblTimeLeft.Text = timeCounter.ToString();
are never accessed.
I'm certainly missing something. Can you help me with the actual line/lines of code that should do the trick?
|
|
|
|
|
in your first post u are disabling the timer after registering. remove this line
this.countDownTimer.Enabled = false;
and add it after
this.lblTimeLeft.Text = timeCounter.ToString();
Regards
Shajeel
|
|
|
|
|
As I said, the Timer has a Start method, I believe. Or, it's Enabled property has to be 'true'.
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
