|
Thanx for your womderful help.I think I should go by the second approach.Gonna start working on that.Thanx once again for the wonderful idea.
|
|
|
|
|
i have a windows application which talks to a web service, now i want to configure the web reference at runtime through App.config file, i know there is a way to do it but i donot know how, any one can help me ?
I am Entry level person
|
|
|
|
|
It's an XML file, you can open and manipulatge it. There's no specific write mechanism provided for the app.config file.
Christian Graus - Microsoft MVP - C++
|
|
|
|
|
I like to find out whether it is possible to monitor what files are being copied out of my PC to bluetooth devices attach to the USB port. Can somebody advice or direct me? Maybe there are ActiveX Components available in the market for that?
|
|
|
|
|
tslu wrote: I like to find out whether it is possible to monitor what files are being copied out of my PC to bluetooth devices attach to the USB port.
Not really. A file copy is nothing but a File Open and File Read operation by an application. The application then opens another file on another device and writes it. There is nothing that ties the two operations together, other than the application doing the copy. Nothing in the system will associate the two together.
Also, how are you going to tell the difference between an application just opening a file and reading it to get values out of it or opening a file and reading it to copy it somewhere else? There's just no way you can do that.
tslu wrote: Maybe there are ActiveX Components available in the market for that?
I seriously doubt it for several reasons. Not the least of which is because there is no market for a tool such as this and it has a very limited use.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
tslu wrote: Can somebody advice or direct me?
Well as Dave said doesn’t sound possible, but why couldn’t you monitor the system for removable mass storage devices. When a new one is detected watch it for directory changes. Record any new files.
I know it’s not really an answer but it a way to do it.
DEBUGGING : Removing the needles from the haystack.
|
|
|
|
|
i have a Asp.net web service on my computer and of course i set up my computer as a web server( windows 2000 server), so i can test the web service using IE and type http://localhost/RetrieveData/Service1.asmx in the address, it can run the test page and get data back from database and runs well
but when someone else want to run the same page they can show the page but when they want to get the data back it shows" the test form can only run on the local computer"
i think all the web server settings are correct!
so i really need someone give me some help!
I am Entry level person
|
|
|
|
|
ya know how when you select a method from the list that Intellisense gives you, and it shows that little tooltip that describes what the method does? and when you start to type in your parameters, it gives desctiptions of what the parameter names represent?
well is there a way to make your own methods that behave the same way?
i've tried <componentmodel.description()>, but that doesn't do anything.
any help is apprectiated,
stephen
|
|
|
|
|
If you mean descriptions for classes and methods you made, you can use
VBcommenter[^].
It makes a xml file with all your descriptions in it.
Pompiedompiedom...
"..Commit yourself to quality from day one..it's better to do nothing at all than to do something badly.."
-- Mark McCormick
|
|
|
|
|
I have created a custom control and built the assembly. I then placed the dll in a folder in the wwwroot folder and added an html page with the following text:
<object classid="ReviewControlVB.dll#ReviewControlVB.UserControl1 Height=" 272"="" width="336">
where ReviewControlVB.dll is the name of the assembly and ReviewControlVB.UserControl1 is the namespace and control name.
I placed this page in the same folder, but the control does not appear when I launch the page.
Any suggestions would be appreciated.
|
|
|
|
|
Try writing a web custom server control and then drop it on a aspx page and let asp.net do the work.
Dan
|
|
|
|
|
Hi Everyone,
I have limited experience in Microsoft Access and am attempting to link from an excel worksheet to access in order to use the data for reporting. Once the data is in Access, I also need to extract or parse text from within one of the rows and place in several rows (in order for the data to be used for comparisons). The only delimiters in that row appear to be spaces, dates, times (no true delimiter that I can see. Does anyone have a routine to do this type of task?: confused:
-- modified at 10:55 Wednesday 19th October, 2005
|
|
|
|
|
Hi, I'm working on a windows application, in the main form I have a data grid which displays information to the user, the user can select a row from the datagrid and then perform som actions with a few buttons we have designed for them, but they cannot edit the information from the grid, so it was set to read only, and also created a code so when the user clicks on a cell on the grid the whole row is selected. even when the datagrid is set to read only, when the user clicks on a cell the whole row is selected but also the text on the cell. There is a drop down list, acting like a filter of the information shown in the datagrid, so when the user selects an item from the drop down list, the data source of the grid changes, it is cleared and the new information is shown.
the problem is, when a cell was clicked and the text was selected (highlighted) and I click on a new item on the drop down list, the selected text does not dissapear from the grid it stays there like some sort of ghost, just to call it that way. if anyone knows how to clean completely a datagrid or have had this kind of problem before, I'd appreciate a lot some info about fixing this problem.
|
|
|
|
|
Hi all
I need to know how to write code when I press btn copy my application or my programme to spacIfic folder on the hard disk.
THANKS.
AMR-CIS
|
|
|
|
|
plz explian the folderbrowserdialog in vbdotnet and give me the one example
venukumar
|
|
|
|
|
sorry i got no time for a longer help...
anyway it's almost like the openfile dialog....
the normal usage is like
Dim fb as new FolderBrowerDialog()
fb.initial path = "what you want"
fb.title = "what you want"
...
Dim DR As DialogResult = fb.show()
'when we are here the dialog it's already been closed (the form will wait for it)
If DR = DialogResult.OK then
If IO.Folder.Exist(fb.selectedpath)
....
End if
consider this above as a pseudocode, i just wrote it as i remember it.
<- true inside to understand outside ->
|
|
|
|
|
I have to create an Windows App (VB.Net) , The user can drag and drop forms and controls on it and map to existing tables to display values.
Now i need to store all the details of Forms and controls including the database mapping some where(XML or SQLServer) ,
so that i can display the Forms with all the controls in my Windows Application as well as in a PDA Device as well.
Chiczzzzz!!!
|
|
|
|
|
how to recived bits by parallel ports to vb?
|
|
|
|
|
Hello friends,
I am working on 1 application where I want to send some data to WebApplication from VB.NET application. The situation is like this:-
There is one Web App developed in ASP.NET. The desktop application is being developed in VB.NET which will be installed at remote computer. If internet is connected to it, then one class will start communicating with the ASP.NET Application i.e. on Web Server(Say, on click event of some button on some form). I want to send(some login info required to get access to web server) & receive(the records from database) the data within these 2 applications without user to open a IE browser. VB itself shud be able to do this. Since its only retriving some data from Web Server in String format, i don't want user to go and do something by opening new IE window...I want to do it using VB.NET only...
Will you please help me?????
Looking forward to see reply....
Regards,
Rohan
|
|
|
|
|
I have a doubit while I am developing kids software,
Is it any way to bring the animated(already) pictures to the form using picture or image box or anyother way.please If u know send me in this mail address.
maniams@hotmail.com
Murali
|
|
|
|
|
There there are many ways for doing it...
one fast and easy way should be using the AxWebBrowser class wich is almost an internet explorer.
what i mean is:
make a page for the login on the server, wich should be smalla enought to fit
in the small form you want to create, then ambed on of this AxWebBrowser class.. it's very easy to use, and you can also find many cool alrticles here on CP.
of course a more cool waw using the AxWebBrowser can be using the document property of the WebBrowser class, and get the acces to the textbox you want directly from the Document Instance....
what you require is: Interop.SHDocVw.dll, AxInterop.SHDocVw.dll (wich you can create from the first one using the appostie visual studio tool) and for the Document class (only if you'll use it) MSHTML.dll.
<- true inside to understand outside ->
-- modified at 23:14 Wednesday 19th October, 2005
|
|
|
|
|
hi
any one tell me
how to change the background color of a messagebox
in vb.net
please give me codding
Md Shamirul Islam
|
|
|
|
|
You can't change anything in a messagebox. You need to write your own to do this.
Christian Graus - Microsoft MVP - C++
|
|
|
|
|
you can make a winform,and use delegate function to make a custom MessageBox Form of yourself..
|
|
|
|
|
What on earth are you suggesting ? A delegate for what purpose ?
Christian Graus - Microsoft MVP - C++
|
|
|
|