|
Nish [BusterBoy] wrote:
You didnt seriously think that I wrote those words, did you?
No, I presumed it was a song, I just wondered which.
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
|
|
|
|
|
Christian Graus wrote:
No, I presumed it was a song, I just wondered which.
Whew! I am glad of that 
Nish
p.s. I can't connect to sonork now!
It's seven o'clock
On the dot
I'm in my drop top
Cruisin' the streets - Oh yeah
I got a real pretty, pretty little thing that's waiting for me
|
|
|
|
|
I would suggest reading up on the SDK API...without a firm understanding of they work, it'll be really hard to pick MFC. It took me about 3 years to consider using MFC and actually try it, before that it was a failed attempt at OWL. SDK is easy to follow...top to bottom...like a DOS program with messages. MFC hides so much crap from you, but once you understand it, app development is sooo much faster. Considering you don't get stuck on goofy problems.
I've only been dickin around in MFC for about 1 year and a bit and I can accomplish anything I would want probably not the best MFC way!!! but when it's compiled it all looks and acts the same. Yup...definetly understand SDK then migrate into MFC, but it sounds like you've already started with MFC so maybe try and intergrate the two togather.
Ciao!
"An expert is someone who has made all the mistakes in his or her field" - Niels Bohr
|
|
|
|
|
HockeyDude wrote:
would suggest reading up on the SDK API...without a firm understanding of they work, it'll be really hard to pick MFC.
Do you really think so ? To me, having done it in reverse, that's like learning C before C++, doing it the hard way before the easy way.
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
|
|
|
|
|
I think the advantage to learning the WIN32 APIs through raw SDK programming is that you learn the purpose of each of the functions, messages and other pieces that make up a Windows application.
With that said, MFC and WTL are structured around the SDK in an object-oriented way and are surely a superior way to develop Windows applications, but by knowing and thouroughly understanding the SDK, it can be understood what these two frameworks are trying to accomplish. Then when you want to try to implement something that the original designers of MFC and WTL had not anticipated, you can tackle the problem with your base knowledge.
While I agree that SDK programming is the harder way to develop a Windows application, I think that the comparison of "C : C++ is like SDK : MFC" falls apart because going from C to object-oriented programming in C++ is a completely new way of thinking. MFC is simply an object-oriented wrapper around concepts and restraints that are created in the SDK. This is just my opinion though.
|
|
|
|
|
kilowatt wrote:
While I agree that SDK programming is the harder way to develop a Windows application, I think that the comparison of "C : C++ is like SDK : MFC" falls apart because going from C to object-oriented programming in C++ is a completely new way of thinking. MFC is simply an object-oriented wrapper around concepts and restraints that are created in the SDK. This is just my opinion though.
You're right, of course, but the example is there, in both cases people suggest the harder alternative should be learned first.
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
|
|
|
|
|
I made the initial transition from VB to Borland C++...OWL was chinese to me...I picked up the C++ lanuage constructs(??) quick cuz they're the same in most langs...the OWL really through me off though...The createWindow functions compared to VB's click and drag were very foriegn to me.
I later bought (without really knowning what it was) Win 95 programming API bible, which was much easier to follow. The code samples taugh me all the in and outs of windows programming. Once I understood what the CreateWindow function actually did...and the parameters actually meant...MFC was much easier to learn then when I tried OWL withouth knowledge of the API...
Everybody's different though...I don't imagine my experience in VB helped, cuz it really only made me think....god...programming is easy...which...is a totally different story in C++.
Cheers!
"An expert is someone who has made all the mistakes in his or her field" - Niels Bohr
|
|
|
|
|
kuphryn wrote:
Hi.
I began study MFC programming from Prosise two months ago. I finished the first two part of the book and will begin Part III. To be honest, I still cannot design a program of *my own* and implement it using MFC.
Don't worry, this is not a problem only with you. This is the same problem every newbie of MFC/VC++ encounters. And among many reasons of the popularity of JAVA this is also the one. There is absolutely no fault of the writers of books you named above. The main reason is the complexity of MFC and the absence of CodeDOM in VC++.
Imran Farooqui
|
|
|
|
|
Imran Farooqui wrote:
And among many reasons of the popularity of JAVA this is also the one.
Did you say this with a straight face ? Popularity of Java amongst whom ? 
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
|
|
|
|
|
I mean that complexities involve in MFC and its HUGE learning curve are also some reason that many people looks towards JAVA. (Personally i dislike JAVA as I am a proud CPian). But if you ask one group of students to learn JAVA and other to learn MFC. Then after 6/7 months you give them a mini project. The group of people that learn Java will make this project much more quicker and easily than the people who are learning VC++.
Imran Farooqui
|
|
|
|
|
Imran Farooqui wrote:
But if you ask one group of students to learn JAVA and other to learn MFC
This is not a fair comparison. java is a programming language. MFC is a class library. Tell them to study java and c++, one for each group. or actually tell them all to study both. The ones who dont get good at C++ in 6 months would be bad anyway, so let them learn java
Let the others then start with MFC or ATL or whatever
Nish
It's seven o'clock
On the dot
I'm in my drop top
Cruisin' the streets - Oh yeah
I got a real pretty, pretty little thing that's waiting for me
|
|
|
|
|
Imran Farooqui wrote:
And among many reasons of the popularity of JAVA this is also the one
Imran Farooqui wrote:
The main reason is the complexity of MFC and the absence of CodeDOM in VC++.
Java has CodeDOM????
I thought the better java programmers used emacs and linux. It was always the poor ones who used VJ++.
Nish
It's seven o'clock
On the dot
I'm in my drop top
Cruisin' the streets - Oh yeah
I got a real pretty, pretty little thing that's waiting for me
|
|
|
|
|
Thanks guys.
Christian Graus made a good point. He said, "C++ is a well designed language that is made to be non-restrictive, to leave the design to the programmer. MFC is a framework in which you need to do things the MFC way."
Is API programming *similar* to C++? I thinking the best way for me to learn windows programming is to approach it from *low-level*. In other words, I think I would master it if I can just start coding everything from scratch instead of using classes from MFC. I believe one reason I cannot understand all MFC classes and functions is because I do not know what *they actually do* and how. I am used to designing and implementing my own classes. I prefer to design my own classes for later use, like a personal C++ library. With MFC, I have to not only learn a huge framework of classes, but I have to follow a rule that the design have set. That is very limiting. I do not have problems with the framework. It is the vast number of classes in MFC that makes it difficult for me to see everything that is going on.
For example, I know class X handles a specific job. I can tell instantiate an object X or override class X, but I lack the knowledge of how things surrounding class X relate to it. Moreover, I do not know class X well enough to see its potential.
Kuphryn
P.S. I think I have to change track because I just cannot produce anything with MFC right now. Something has gone very wrong during the last two months of my studying from Prosise's. Part III of his book is about discusses topics beyond basics. So according to his agenda, I should be able to produce result by now.
So that leaves two choice: Jones' or API.
I will most likely try Jones' first. If that too leads me nowhere, then API will it is.
Kuphryn
|
|
|
|
|
Have a look at http://www.codeproject.com/wtl/
I found it easier to learn WTL than MFC first. With MFC I found it hard to get the bigger picture with all the wizards and generated code. WTL is smaller and simpler. I plan to learn MFC 7 though. Note I've only written some simple windows apps.
|
|
|
|
|
I looked at the API code at http://www.winprog.org/tutorial/ and I understood it easily. It looked just like the kind of C++ programming style that I use with my Win32 console programs.
This is weird. MFC code confuses me. There are too many intantiations and function calls. However, I have no idea what those objects and functions do.
I hear Petzold's API is the best. However, it is in C. What is the best *beginnger* API that emphasizes C++?
Thanks,
Kuphryn
|
|
|
|
|
I love C++. I love windows programming, but I just cannot get to a point where I feel confident solving problems and be able to implement the program as windows based.
I will still have hope of working with MFC. I believe I need to start from the beginner of MFC as when I was learning C++ (cout >> "Hello World." Again, MFC will not get any easier. My plan not rely on MFC become easier. Rather, I plan to be ready for MFC.
I decided to buy Richard Jones' introduction to MFC. I know Prosise
s book is the best. However, that does not mean it is the only way to learn MFC. For example, I believe Deitel&Deitel's C++ How to Program is the best book for learning C++. However, it was not the first book I read. By the time I read it, I was able to gain so many insights "advices" that they give because I understood the fundmentals of C++.
I will apply the same learning approach to MFC. I really should learn API first, but I feel MFC is very learnable. It is just that MFC is huge, and so I have trouble focusing and learning everything at once. For example, looking about at C++, I am impress with myself knowing C++ is itself huge. I learned C++ in two months.
Kuphryn
|
|
|
|
|
kuphryn wrote:
For example, looking about at C++, I am impress with myself knowing C++ is itself huge. I learned C++ in two months.
Completely ? Did you understand how iostreams work in that time ( so that you could write your own stream/stream handler for a new class ? Did you know enough about STL that you could write your own containers, iterators and algorithms ? If so, MFC would be a doddle - two weeks tops. If not, then you know what I mean, knowing a subset that makes you able to use a tool is not the same as knowing it, and the former is the cost of entry to start building the latter.
Good luck.
Christian
The tragedy of cyberspace - that so much can travel so far, and yet mean so little.
|
|
|
|
|
No way. I did not know C++ competely in two months. That requires time, not because of learning, but because of experience. Experience takes time and effort.
I began programming using OOP in two months, including streams and container (linked list). No, I did not write my own iterators or algorithms (templates?).
Anyways, the coming weeks will the a challenge - one that will determine my future as a quality programmer. Lets do this!
Kuphryn
|
|
|
|
|
im trying to profile my app... i enabled profiling from the project->settings dialog and i did build->rebuild all. then when i tried build->profile, it gave me a PRF1011 saying that it couldnt find the PBO file
can someone explain to me how to fix this?
note: i'd rather not use the command line
>>Roman<<
|
|
|
|
|
Launch from the command line profile.exe and see which application is launched - VC profiling is supposed to work with profile.exe from VC/Bin directory. I've got the same message because the VC was trying to use profile.exe from PlatformSDK / bin / winnt.
|
|
|
|
|
Hi there,
in Winnt, if my recollections hold correctly, if you would right click on a DLL, there was an option to view its export tables and details. Is there an equivalent way or a command that would give you the same option in 2000 or other Microsoft operating systems? (i.e. this is without using the any VS tools)
|
|
|
|
|
I'm not quite sure about that, but this feature may have been implemented using QuickView. Since QV is gone in 2K and later, you're out of luck. Without Depends.exe or other 3rd party app you'll be unable to check imports/exports.
Tomasz Sowinski -- http://www.shooltz.com
|
|
|
|
|
How can you tell i'm going off on a big message spree?
Anyways...which would be better suited for cross-object communication?
WM_USER is just a define so this seems rather ummm...the crappier of the two approaches. Whats to stop someone from using the exact same WM_USER+1 and now we have conflicting messages...?
RegisterWindowsMessage is much better here becuz it generates unique message numbers, however would need to be stored in a variable somewhere (global) so more than just the class that registered it could use it...
Am I right here...?
So i'm confused...should I use a global with namespace, just WM_USER constants...or local member data and have accessor/mutators for the message...?
Cheers!
"An expert is someone who has made all the mistakes in his or her field" - Niels Bohr
|
|
|
|
|
Are you just creating some new control? Or it's something more complicated?
Tomasz Sowinski -- http://www.shooltz.com
|
|
|
|
|
Control from scratch CWnd with multiple child windows.
No IPC or anything, just in process.
"An expert is someone who has made all the mistakes in his or her field" - Niels Bohr
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
