|
Mike,
First, thanks so much for the reply.
Still I had this issue after reading the FAQ. To create a cluster you need an unique IP where all IIS requests go. Then from there, they get distributed to different computers. What happens when the first IP computer where all requests go dies?
Thanks
Al
|
|
|
|
|
The unique IP address is shared among all computers in the load-balancing cluster. IIRC, they fake a MAC address for the cluster and program their network cards to recognise that MAC address as also being valid. When an ARP request comes in for the shared IP address, at least one computer will respond with the cluster MAC address - the sender on the local segment then sends packets for the shared IP to that MAC address. All the servers will therefore receive it.
By the use of the heartbeat packets, the servers partition the space of request addresses between them. Only the server which is responsible for that requester will have the Load Balancing driver pass the incoming packet to the application - the other servers will simply discard it. The partitioning is self-tuning.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Now makes lots of sense, and that's what I want. Do you have a good doc for installation?
Cheers
Al
|
|
|
|
|
Mike,
That work very well, so when a computer goes down the other one takes over!! Awesome.
However what about when IIS goes down? The packats still arriving to the computer with a IIS down and displaying a NO PAGE FOUND. Any way to check if a service is up and if its not taking it out of the cluster?
Al
PS Thanks a lot for all your help
|
|
|
|
|
Hi There,
First of all I know very little about VB.Net. I have just bought a book in VB.Net 2003 and have finished some of its chapters. I have done programming years ago. Like QBASIC, PASCAL and COBOL. I want to get back into the programming scene. At present I work as a Network Admin for a small public school. I am keen to build an application to manipulate Active Directory using something like LDAP. I have located several VBScripts to add users, groups just stuff like that. I want to create this for our school and to other schools that this would really benifit. I want to do this as a project and not to gain any money. Could someone please help me build such an application. Please contact me for more info
Cheers
Helpwanted
|
|
|
|
|
helpwanted wrote:
I am keen to build an application to manipulate Active Directory using something like LDAP
Try to check the information from here[^] and let me know whether it match what you need or not.
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
Hi!
I'm developing a security application under Windows xp and I want it to run at the very beginning of the startup, before any other application starts. Is there any easy way to do it?
Thank you very much.
JaVinci.
|
|
|
|
|
Hi
A simple way is to make a Installer of the application with the option of putting the application in the StartUp folder under windowsXP
Otherwise,If you have a very good knowledge of Windows Registry,(make sure to have registry Backup before editing it)then you can add the add a new startup application using the following
Open your registry and find the key [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run].
For your Program to run,create a new string value and set the value of the string to the program executable.
For example, to automatically start Microsoft Paint, add a new entry of "Paint"="c:\windows\mspaint.exe".
Kaushik Baruah,
Programmer Analyst in Cognizant Technology Solutions,India
|
|
|
|
|
Hi and thanks for your reply!
I was looking for some kind of registry solution... But it's important for my application to start before any other user application, does this solution grant it?
My firewall, for instance, is launched even before the Win xp login screen appears, I mean, I know it can be done... I just don't know how...
Thank you very much, Kaushik.
JaVinci.
|
|
|
|
|
Try to build your application as windows service[^] from vb.net.
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
Sorry! I forgot to mention I'm using VC++ 6...
|
|
|
|
|
Try to read this article[^], is this what you are looking for? Let me know if it is right or wrong!
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
Maybe you should check the CP article here. I think it will fit your needs better that putting your application in HKLM/.../Run
...Plug & Pray... 
|
|
|
|
|
Hi there,
I've got a new A0-plotter (HP) but this silly thing cannot arrange jobs. So it wastes a lot of paper even if the printing format is smaller than the plotters paper size. It has to be driven with HPGL2.
Does anyone know a plotter server program, that is able to combine HPGL2-jobs together, arranging them in a manner to save paper? The files have to be probably rotated by 90 degrees and given an appropriate offset to put e.g. 4 x A4 in one line.
The program has to understood HPGL2 and has to be able to rotate and shift the data.
Any helpful softwareparts known? HPGL2 seems to be a problem for this task as I was told. Can't believe that.
tb
|
|
|
|
|
I have a network with several Windows 2000/XP clients and a Windows NT 4 domain controller. There is also a new Windows 2003 (active directory) server, that is the Primary Domain Controller of a *different* domain. The ultimate goal is to migrate all clients to the new 2003 domain and eventually remove the aging NT machine from the network.
The following steps have been performed:
Log on to the client machine as local administrator and join it to the new domain.
Restart the client and log on to the new domain as a domain user (to create the new profile).
Log off the client and restart the computer.
Log on to the client machine as local administrator and copy the users old profile (from C:\Documents and Settings\...) into the newly created profile.
Add the new user to the machine as a local administrator.
Restart the computer and log back on as the new domain user.
At this point, all shortcuts and programs seem to be present. However, the layout and behavior of the desktop, appearance of the start menu and several other items are different. Furthermore, email (Outlook 2000) folders can no longer be located and user priveleges seem to be restricted. It seems that while the files and folders are copied correctly, the file permissions and registry are not.
How can I migrate a users local profile when moving from a Windows NT 4 domain, to a *different* domain on a Windows 2003 active directory server?
The StartPage Randomizer
|
|
|
|
|
Try buy and read from this[^] book.
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
Hai, answer me please
When system reaches on desktop it shows message
" Windows will shut down now" and count down begins
what is it? tell me the solution
san4wish likes it.
|
|
|
|
|
I seems like you have the saster worm or plaster or any worn that do this ,chech your pc from symantec , and the temporary solution to this to avoid shutdown ,is when the timer is counting down ,type at the command prompet : shutdown -a ,, this will abort the counting and lets you free for the next restart :->.
|
|
|
|
|
I think your computer is affect with the virus. Try to use any anti-virus software to scan from the boot CDROM or scan from the internet.
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
|
 click on the start menu and click run ,then type SHUTDOWN -a at the field and it will stop it.
|
|
|
|
|
Your ListFiles of OS Windows is corrupted the best choice is to reinstall again OSWindows(XP or 2000) then you computer will work without that error. I suggest you to keep ur benefits files from drive which is installed ur OS.
|
|
|
|
|
Hi:
Looks like your system has got infected and I think a variant of BlasterWorm. You can abort the shutdown by quickly typing shutdown -a and then you can update your Antivirus with latest virus definitions. Run a full system scan.
That should help you with a resolution.
Deepak Kumar Vasudevan
Personal Web: http://vdeepakkumar.netfirms.com/
I Blog At: http://deepak.blogdrive.com/
|
|
|
|
|
hi
i need help in undrstanding the printer spooler.
by the way, i have machine with windows98 OS
connected locally with printer.
is there any software tool that help me
in undrstanding spooler?
and thanks for all
|
|
|
|
|
What do you need to know?
When a Windows program prints, the job is sent to the hard drive in (IIRC) System32\Spool\ where it is saved until the spooler service gets around to it. The service is notified of a job waiting, and the spooler then handles the interaction with the print device driver and the actual printer. This allows the application to continue interacting with the user, while printing is handled in a separate process as CPU time is available. Spooling allows control to return to the user much faster, and helps to prevent such errors as buffer full, or printer out-of-memory states which would crash DOS systems.
Nice tool when it works, but the Win9x implementation was not the greatest. It's much improved since. If you want to play with it, try running a few programs, set the spooler to disabled (in the Printer settings), then try printing a document. Compare to the behavior when spooling is enabled.
Boredom, Bull$^%&, Baggage, Bar - all start with 'B'
Coincidence?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
