|
It depends on a few factors:
-Was the image applied at a sector level? (eg, the image contains 100mb of an OS and 10GB of blank data (00), does it even overwite with blank data?)
-Did the image overwrite the sectors of data which you want to recover?
Im sure you wont be able to use any simple 1-click program to revert the whole partition, but what you could start with is using some hex editor to open the drive (as a physical medium, and or the partition itself) and then look at the sectors for data which may be recoverable, and of interest, an example of such a program is WinHex.
Thats a start...
However how to go from there depends on alot of factors, such as type of data, file system of the original and new partition, OSes and so on...
Hope you can atleast get something back... 
//Johannes
|
|
|
|
|
Nope. You overwrote the data in the partition beyond any hope of getting it back.
|
|
|
|
|
IF the data you need to recover was actually overwritten (as opposed to being marked as empty) you're almost certainly going to have to contact a professional firm and pay $big bucks. Even if it wasn't overwritten trying to examine it via a hex editor to find missing files isn't viable unless you only need to recover a handful of non binary files. Unfortunately you're more or less SOL.
Otherwise [Microsoft is] toast in the long term no matter how much money they've got. They would be already if the Linux community didn't have it's head so firmly up it's own command line buffer that it looks like taking 15 years to find the desktop.
-- Matthew Faithfull
|
|
|
|
|
Dear all, I want to find a functional Board to test Contact&Contactless Module.
The board should have the function as lists:
Contact Test Item
Open/Short(Diode to GND/Vcc test)
Leakage Test(input high current)
Leakage Test(input low current)
Dynamic current consumption test
ATR-Functional test
Contactless Test Item
Input capacitor test
Modulation Voltage Test
Functional Test
if you could give me some manufactures, i will appreciate you!
or if you could give me some websites from which i could find something relate, i will appreciate you too.
Above all, Merry Christmas to all of you.
MSN:msnadair@hotmail.com
Skype:skyadair
|
|
|
|
|
guys i need help! i have a problem my pc just hangs in the middle of something it just simply stops responding.. 
if someone could please try to help me figure out which part could be the defective one...
mother board? msi kt4av (socket a)
..its a newly replaced motherboard , but with the same model and its already used and not brand new.. <-am thinkin this could be the one
memory? i have 256 ddr 2(pcs) and i tried already to put one first.. (still hangs) then tried the other one too but still the same.. my pc still hangs in the middle of my game or sometimes even browsing only on the net
processor? i also upgraded my processor from 1.2 athlon to 1.7 athlon also.. could this be the problem? but its working fine sometimes but sometimes not
video card? nvidia fx550 256 mb 128 bit
but i can play games like warcraft, gta san andreas with it before and still now..
power supply? 400 watts
could this be my problem? could there be power shortage?
i know my pc is kinna pretty old.. and just might suggest to buy a new one.. but i dont have budget yet.. and i do have a plan of buying 'AMD Phenom 9500 Quad Core' that would be.. how much.. too damn expensive yet..
any help would be appreciated...
and thanks again in advance
i never really like this... being a programmer...whhargghh!!
|
|
|
|
|
First i would go about finding out if it actally is a hardware problem, as it could just be windows thats all broken down. A simple way to test this is to burn out a Linux live on CD (Like Knoppix or Ubuntu) and then sit and click around in that for a while, surf the web, check email etc. If it still crashes then hardware is you problem. If not, then windows/program/malware is the problem. (a re-install would probably help)
If its hardware it can be anything really, RAM is an important part in any computer, but it could just as well be any other part.
It could also be that some setting in your BIOS is overclocking your computer/parts of it, this is a common reason for freezing, so maybe you should load BIOS defaults too.
This type of problem can be hard, as anything can affect everything else (in a odd way)...
I hope this is a start...
//Johannes
|
|
|
|
|
ei thanks!
i ll try to reset my bios i havent try that.. and i wish that would solve this..
i havent done any overclocking yet but yeah maybe the previous user of my motherboard tried something else..
also i ll try to burn out too.. but first i need to download the ubuntu or knoppix but i think it will finish downloading tomorrow cause its more than 500 mb size..
i never really like this... being a programmer...whhargghh!!
|
|
|
|
|
download a memtest86 CD, boot it, have it run a stress test overnight. If it passes with no errors you've proved the ram innocent. Running prime95 (24hrs per test type) in windows will stress your CPU and to an extent your mobo/ram. If it's erroring out you've got a hardware problem.
If your new CPU uses more power than the old one but you're using the same heatsink it might be overheating and crashing. For a socketA board motherboard monitor should be able to keep an eye on your CPU temp. If you're going above 60C it might be a problem, 70C definitely would be. To test the PSU, get a multimeter and with the system fully loaded check the voltage between +5V(red) and ground(black) and +12V(yellow) and ground in the ATX plug. Depending on the probes you might need to supplement with bent paperclips to make contact. +-5% is within spec anything outside is a problem.
Otherwise [Microsoft is] toast in the long term no matter how much money they've got. They would be already if the Linux community didn't have it's head so firmly up it's own command line buffer that it looks like taking 15 years to find the desktop.
-- Matthew Faithfull
|
|
|
|
|
thanks guys for all your replies man and guess what!!? 
last night i did reset the bios to default and i think it did solve it
cause ive used it more than 5 hrs straight without halting..
before it hangs just within an hour.. and last night i did enjoy playing my warcraft(DOTA) and had a 'BEYOND GOD LIKE' ai hero killings hehe!! thanks to johpoke and also to dan neely
but i still need to to burn out to be sure.. and yeah i should check my cpu temp..
you guys are great man i love this site more than ever
i never really like this... being a programmer...whhargghh!!
|
|
|
|
|
 Lucky that only reseting the bios fixed the problem, sometimes it can take forever to find the problem. Running prime95 for a few days as dan neely said is a way of ensuring 100% stability, and is a very good test to do on any computers you use.
To check CPU temps use SpeedFan
//Johannes
|
|
|
|
|
I orignally posted this question under OS/SYSADMIN
But then while looking at this section I noticed questions about DDK So I posted the question here too
Hi,
I was looking to use WinDbg remotely to debug device driver anyway was looking at some documentation
and it looked like there were one or more ways of connecting 1) null modem via a com port specfying those paramters in the boot.ini
also in addition or maybe just another method of connecting remotely was starting WinDbg with a TCP:PORT number
I have a wireless router and can open up a port by typing the IP address of the router and from one the menus opening up a port
My question is when connecting through a port dont I have to know the IP address of the machine I connecting to
or maybe this isn't necessary since the machine I am connecting to is the one that is connected via the null modem
Thankx in Advance
|
|
|
|
|
The DDK is the best source of info on this. You can also find it on the internet genrally. Check out OSR online for good driver resources.
Anyway, a null modem cable is the easiest. Fire wire also works and is quick, and the lates is supposed to be USB based, havent tried it yet thgough.
You cannot use an IP stack for debugging though.
So, stick your nuull modem cable into COM1 on each machine. Add to boot.ini on the target machine /debugport=COM1 /baudrate=115200 to the stock boot option (remove the other switches).
Start WinDbg on the host and open a kernel debug session on COM1 at 115200 then reboot the target.
Away you go. Then set the symbol path, source path and so on and you can step through your driver code.
Morality is indistinguishable from social proscription
|
|
|
|
|
I have gotten a conection with a fireware on dual core laptop windows XP to Dual core tower windwos XP however laptop dual core XP to TOwer XP quad core gives me a problem
|
|
|
|
|
Hi
Moving asp.net files over from a citrix server to a web server?
What sort of problems am I going to have regarding how the code works, the .net framework and interfacing with sql server?
I was thinking of using ssl for the link between web server and citrix server]
any help would be great
cheers
|
|
|
|
|
Hi everyone!
I have a GA-965P-DQ6 motherboard from Gigabyte and I'm trying to install a PCI to IDE card with Sil0680 chipset on it, the hardware is detected and driver is installed but the install wizard returns (Code 10) so windows could not run the device.
I have win vista and i have downloaded the last driver for my device!
What should I do to run it?! 
Sojaner!
|
|
|
|
|
Hello All,
Which is the best place to look for the information about the various facts technology about hardware. I am an application programmer with a very limited knowledge of how we access the hardware through software.
Basically what I need to learn is the basic knowledge about various topics as PCI buses (want to undersatand what bus-function-device-offset way of reading PCI space), ISa, SPD, SMBus etc etc.
I am able to download specification documents for each of above mentioend technology bit they are very detailed and indepth. What exactlly I am looking for is brief and to the point stuff for a programmer.
Pleas help
Thanks
|
|
|
|
|
vikrantc1355 wrote: What exactlly I am looking for is brief and to the point stuff for a programmer.
The average programmer doesn't need to know this stuff. The hardware, in conjunction with its driver and the OS, expose an interface to the user-mode world which is used to access the hardware - things like a drive letter, a custom IOCTL, a com port indicator (COMx), ... User-mode programs use that to communicate with the hardware.
If you're looking at actually talking to the hardware, you're entering the realm of writing a device driver. "Brief and to the point stuff" for this subject doesn't exist. How a driver talks to a piece of hardware depends on each piece of hardware, and the operating system it is written for. This is not a simple straight-forward subject.
Here's my usual list that I give when asked about info on device drivers.
The WDK itself - documentation andthe samples are improving but it assumes you already have a good knowledge of the OS
"Programming the Windows Driver Model" 2nd ed by Walter Oney - make sure it is the 2nd edition
"Microsoft Windows Internals, Fourth Edition: Microsoft Windows
Server(TM) 2003, Windows XP, and Windows 2000" by Mark Russinovich and David Solomon
"Windows NT Device Driver Development" by Peter Viscarola and Tony Mason - dated but the stuff they discuss hasn't changed and it's a good foundation.
"Developing Drivers with the Windows® Driver Foundation" by Penny Orwick and Guy Smith - this one is from Microsoft Press and is the only book currently published with a good description of KMDF
This one should be excellent (if they ever get it published) "Introduction to the Windows Driver Foundation Kernel Mode Driver Framework " by Peter Viscarola, Tony Mason, Mark Cariddi, Brenda Ryan, Scott Noone, and OSR
|
|
|
|
|
My requirment is not something related to driver develoment.
The books you menmtioned seems to be specific to that peupose.
Waht I am looking is like I want for example lets assume I want to show the content of PCI Config space to show this I should have a good understanding of PCI spacce and its structure and other stuff. Smilarly for SPD and SMBus etc.
|
|
|
|
|
The problem is, from a coding point of view, that only drivers are allowed to access this information from the hardware. You cannot write a user-mode program to access this directly - the OS flat out won't let you. The content of the PCI config space, for instance, is the way it is described in the spec. You can look in the DDK files to see the data structure(s) used by a driver to query for the config space (search for PCI_COMMON_CONFIG for the PCI stuff). All those tools that show stuff like the config space (I've written some myself) all commmunicate with a driver to actually get that info.
My suggestion to learn about this type of hardware stuff is to look at the specs for each class of hardware and then the appropriate sample drivers in the DDK to see how those data structures and interfaces are manipulated. You can't really draw a line between the knowledge and the driver since the driver is the only one who gets to use it. The knowledge is in the spec and the "how to" use it is in the driver.
If you have access to a Linux box, it is much simpler to write a Linux driver and play with the structures under that OS. However, you have the problem of what piece of hardware to play with since you probably don't have a spare piece of hardware laying around to serve as your guinea pig.
Judy
|
|
|
|
|
extending on what judy said, what information is exposed in userland is exposed via WMI (which in turn is populated by talking to drivers).
Otherwise [Microsoft is] toast in the long term no matter how much money they've got. They would be already if the Linux community didn't have it's head so firmly up it's own command line buffer that it looks like taking 15 years to find the desktop.
-- Matthew Faithfull
|
|
|
|
|
I would start with any A+ certification book and go from there into your specific area of interest.
PS Real computers interface with real hardware - don't let anybody tell you that you do not need hardware knowledge to be a computer geek!
Cheers
Vaclav
|
|
|
|
|
I konw that in windows, with "extended desktop" I can use two monitors to form a big virtual screen.
But, how can I make the two monitors display part of the same screen.
For example:
I have two monitors with the same 1024*768 display mode, if I use windows to set the virtual screen ,it gets 2048*768 display mode.
But now, I want to get the 2024*768 display mode.
The first one displays [top-left](0,0)-[bottom-rigth](1023,767) of virtual screen, and the second one displays [top-left](1000,0)-[bottom-right](2023, 767).
As a result, left of first one and left of the second one displays the same region((1000,0)-(1023,767))
thank you for any suggestion
|
|
|
|
|
Hi,
I am using the following two API (which are in WinDDK, and included in cfgmgr32.h):
res = CM_Locate_DevNode_Ex(pdnDevInst_OUT, hid, CM_LOCATE_DEVNODE_NORMAL, hMachine);
res = CM_Request_Device_Eject_Ex(dnDevInst, NULL, NULL, 0, 0, hMachine );
I tried these APIS (on VC++ 6.0 & WinDDK 1.7) and it is compiling successfully. But I get 2 linker errors as shown below:
error LNK2001: unresolved external symbol __imp__CM_Request_Device_Eject_ExA@24
error LNK2001: unresolved external symbol __imp__CM_Locate_DevNode_ExA@16
Aslo I checked the Tools->Options->Dirctories->Library files, the path for the lib file "cfgmgr32.lib" is included as:
C:\WINDDK\6001.17048\LIB\WXP\I386
I don't understand still why there is this linker error.
Any one know this problem? Any solution for this?
Thanks in Adv...
Thanks & Regards,
Neeraj
|
|
|
|
|
You're trying to use Visual C++ 6.0 to build with the Windows Server 2008 DDK? Something tells me that's not going to work. Use the build environment from the DDK, or Visual Studio 2005. Microsoft have basically abandoned the old tools.
DoEvents: Generating unexpected recursion since 1991
|
|
|
|
|
hi ...
any please help me in finding the correct DDK VERSION for building NT
based driver in windows VISTA
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
