|
You didn't say what you wanted to do with SNMP, so the documentation starts here[^]. You'll, again, have to P/Invoke everything since there is no native support for these functions in the .NET BCL.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Basically, I wanted to perform the mac-to-ip conversion there. If I could retrieve the computer's IP address, then query for the NIC's MAC address, I am there. Is that right?
|
|
|
|
|
Nope. If there is no SNMP service running on the target computer, you won't get back anything. The NIC's driver must support such a function and I haven't seen one yet that'll do what your describing. Just the normal ARP stuff is supported...
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I've come across an application that enumerates the mac addresses of computer connected to a certain switch and it required me to enter the snmp community string. Any idea how to implement this kind of feature?
|
|
|
|
|
That's because the switch has SNMP support built into it. The app just asked the switch and it reported everything through its normal administration interface, SNMP.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
For a Graph Chart Report
There is option called chart Export,
In that 2nd option called DATA
In that after selecting show value
There is Check box its not allowing to select Don't summarize values
Please help me how to select Don't summarize values check box.
|
|
|
|
|
I am writing a app. and i have a problem. I want when I click a button then the app will run Microsoft Access and open a .mdb file which is available on hard disk?
Who help me???
Thanks
tramdtt
|
|
|
|
|
Download the Primary InterOp Assemblies from Microsoft. There are examples there on how to instantiate any office application and then programatically invoke its methods and functions. Opening a Access file should then be a snap.
|
|
|
|
|
Thank u very much. I'll try
Good luck
tramdtt
|
|
|
|
|
vb6 ?
Private Declare Function ShellExecute Lib "shell32.dll" Alias "ShellExecuteA" (ByVal hwnd As Long, ByVal lpOperation As String, ByVal lpFile As String, ByVal lpParameters As String, ByVal lpDirectory As String, ByVal nshowCmd As Long) As Long
Private Const SW_SHOWNORMAL = 1
Private Sub Command1_Click()
ShellExecute hwnd, "open", "C:\Folder\FileName.mdb", vbNull, vbNull, SW_SHOWNORMAL
End Sub
|
|
|
|
|
In my app my main form has 2 panels seperated by a splitter control - on the control on the right the user can add windows forms (don't ask) and then move them about using the title bar or resize them as you would a normal resizable window - the problem is if the user resizes the panel using the splitter the app kind of loses track where the windows are on the panel.
Is there a way to tell the app where the windows are once the resize has been done?
|
|
|
|
|
PaleyX wrote:
the problem is if the user resizes the panel using the splitter the app kind of loses track where the windows are on the panel.
What do you mean by "loses track of where the windows are?"
What happens to the windows?
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Sorry, I realise I didn't explain that very well. Essentially the user can move the windows forms around on the panel and can resize them as per any resizable windows form but after the panel has been resized using the splitter it seems that windows thinks the window isn't where it is currently displayed but where it was before the panel was resized. Does that make sense?
Rugby League: The Greatest Game Of All.
|
|
|
|
|
You might want to try Invalidating the Panel control to get it to repaint itself, along with all its child controls.
Panel1.Invalidate()
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Thanks - that works a treat, why didn't I think of that?  It's been that long since I did an GUI work I seem to be starting over.
Rugby League: The Greatest Game Of All.
|
|
|
|
|
Can anybody tell me if there is a way to use a list in a Rich Text Box to create a file structure?
Here is what I’m trying to do:
I have directory names listed in a Rich Text Box. An indented line means that-that particular name will be a sub-directory of the line (directory name) above it.
I would like to write a function that will build the directory structure on a disk.
Brad
|
|
|
|
|
It's up to your coding ability. Anything is possible.
In this case, you'd have to keep track of the parent directories depending on where your at, count the number of tabs to denote which level the next directory is going to be at and what it's parent directory is going to be. Then, it's a simple of matter of creating the directory.
It's not the most accurate way to recreate a directory tree though. You have to make sure that the data your getting fits the file format specifications your using. ANY deviation will result in an incorrect tree being built.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Dave Kreskowiak wrote:
It's up to your coding ability
...I need the novice version 
Dave Kreskowiak wrote:
Anything is possible.
That’s what they keep telling me...Someday I hope to be able to say that about my abilities.
Brad
|
|
|
|
|
I'm not writing the code for you. You have to at least make an attempt at it. You won't learn anything if someone else writes the code for you. It's not as simple as you might think.
You'll have to think about each step in the process. Starting with 'Read the first line of the RTB.' What are you going to do when you read the first line of the RTB? Set this as the current directory? What am I going to do if this path doesn't exist? Create that path? How am I going to keep track of the current parent directory? What am I going to do when one line of the RTB has 3 tabs in the beginning of the line and the next one only has 1 tab? How do you keep track of the tab depth and set the CurrentDirectory accordingly?
Creating the directories is easy with Directory.SetCurrentDirectory and Directory.CreateDirectory.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Dave Kreskowiak wrote:
I'm not writing the code for you
Awww c’mon now. I'm sure you don’t mind writing hours and hours worth of code for somebody who you don’t even know.
Seriously, I’m going to give it a shot. I appreciate what you have told me so far. It gives me a good place to start.
Brad
|
|
|
|
|
Why not use a tree view? It's much easier.
|
|
|
|
|
Brad Fackrell wrote:
I have directory names listed in a Rich Text Box. An indented line means that-that particular name will be a sub-directory of the line (directory name) above it.
Here is some blatant self-promotion, but anyway here goes:
I have some code that does something similar in a recent article I wrote for code project, it is not creating directories but populating a tree view (which is a similar heirarchical structure to directories). Take a look at the Word and Category classes to get an idea of how you may implement your solution - it works on a plain text file rather than RTF, and in place of indents I've used $ symbols.
An International Hangman Game for the Pocket PC[^]
The .NET Compact Framework is a subset of the full .NET framework so the code there will work on a desktop application also.
I hope this helps.
Oh! And remember to vote for my article - you could win a Pocket PC too!
"You can have everything in life you want if you will just help enough other people get what they want." --Zig Ziglar
The Second EuroCPian Event will be in Brussels on the 4th of September
Can't manage to P/Invoke that Win32 API in .NET? Why not do interop the wiki way!
My Blog
|
|
|
|
|
Colin Angus Mackay wrote:
it is not creating directories but populating a tree view
I need to actually create the directory structure on the hard drive so that I can place items within the directories.
Brad
|
|
|
|
|
Okay, I thought you needed help with figuring out how to take the tree structure from your file and interpret that within .NET.
What you need is the System.IO.DirectoryInfo class.
The following has an example on how to instantiate the DirectoryInfo object, check if the directory exists and if not then create the directory.
MSDN: DirectoryInfo.Create()[^]
Does this help?
"You can have everything in life you want if you will just help enough other people get what they want." --Zig Ziglar
The Second EuroCPian Event will be in Brussels on the 4th of September
Can't manage to P/Invoke that Win32 API in .NET? Why not do interop the wiki way!
My Blog
|
|
|
|
|
Thanks Colin. Dave also suggested the System.IO earlier. I was using FSO but System.IO seems to be a bit better.
Thanks for the link! I sometimes forget about all the good resources at MSDN.
Brad
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
