|
slw1234@sbcglobal.net wrote:
While find your comments funny...They are a complete waste of my time. You should value the time precious time you have on this earth more. More importantly, get a new line....That one is becoming tired....
Now, excuse...I have to get back to work.
I'm glad you found my comments funny. However, the fact that they are a complete waste of your time doesn't bother me at all since I am not here to help you make better use of your time. I also know how to value the "time precious time I have on this earth", thank you very much.
And btw, my comments were not intended for you at all. They were in reply to a message in another thread that was posted before yours was, and has been deleted now. In case the different subject line, [EDIT] or the date when each message was posted, [/EDIT] or the fact that you didn't get a reply notification for this "reply" to your post doesn't give you a clue whether or not my post was a reply to yours, try waiting till someone else replies to yours. Or you can do it yourself too. You'll find (surprise!) that the reply to your post will be above mine, because they are in two different threads.
I'm sure you thought you're funny. Little did you realise while posting that you are only making a fool of yourself. 
And now you excuse me. I was working while the notifiction about your stupid post interrupted me. Back to work. Don't bother replying, please.
Regards,
Rohit Sinha
Do not wait for leaders; do it alone, person to person.
- Mother Teresa
|
|
|
|
|
Hey everyone,
I've taken the time to develop new products and servics for the Supply Chain industry I would like to build.
I am looking for business Partners/Co-Founders. I have 25 potential customers lined up which represents $125,000 in capital. It will take 6 months to code and debug. I am willing to offer up to 50% ownership with partner(s)...
Please contact me sterling.wright@comcast.net
|
|
|
|
|
Please email (button/link below) if you are interested to work with me on a .NET development project. Please send me some info on your background.
There would be no monetary rewards initially, however the plan is that upon success we would then begin to observe monetary gains.
Thanks.
R.Bischoff
Tengas un buen dia
|
|
|
|
|
I am lead software engineer for a fairly large software company. I am willing to volunteer my time to any project in order to learn C# and the .Net framework. I am willing to put in around 4-5 hours per week.
If anyone is interested please contact me.
|
|
|
|
|
I have a project that has been rotting in my brain for a while. It is not too large but does touch on a lot of the Framework technologies.
Webservices Based Forums
========================
1) Fat Forms Client
2) Webservices on IIS
3) SQL backend
4) Encrypted XML packets for communication
This application would allow for fully secure long term collaboration over the net. It is not an IM system.
Let me know if you are interested.
|
|
|
|
|
That is a good idea Michael, bring a rich UI to something that tends to lack it on the web, FORUMS. I like CP's forums, they did a nice job, incorporating DHTML for friendly views.
Good luck on your project.
R.Bischoff
Tengas un buen dia
|
|
|
|
|
I've got an installer working for my app which is supposed to do the following:
- Fail gracefully if the user tries to install on Win95 or on an account without admin rights
- Download and install IE6 if it's not installed
- Download and install WinNT SP6a if running on WinNT and it's not installed
- Download and install the .NET 2.0 Beta runtime if it's not already installed
- .. then install the app
I'd be hugely grateful of anyone who gives the installer a go and lets me know if it works, or if it fails (and assuming everything installs ok, if the app itself runs properly)
Anyway, Click here[^] to have a look at the project's web pages (it's PxPaint - my Deluxe Paint clone), or grab the installer directly[^]
Cheers everyone! ![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
--
Help me! I'm turning into a grapefruit!
Phoenix Paint - back from DPaint's ashes!
|
|
|
|
|
i have encrypted passwords that cant be decrypted, i want to test this Application With Microsoft ACT,
would it work well..
is there any special way to test or it will work fine as in case of simple application.
it would be pretty nice if anyone reply.
|
|
|
|
|
what do you want to test: that the application works or the fact that the passwords can't be decrypted?
|
|
|
|
|
Mr. Stephan Meyn
Thanks for response...
I want to test the stress...Request/Sec.
but Im not sure that ACT will work at the application that has encryted passwords and connectionStrings.
We create Test while navigation through the pages (Application).
The thing I want to know, would ACT save the session and Encryted data, when we create test. To use it when we will run the test.????
U asked, what i wnat to test????
its a Secure Website that use Encryption heavily.
First i been using ACT in simple application, not such complex one.
if u know how to create complex Tests and either ACT will Work well...then let me know....I need...........
|
|
|
|
|
Hi, I want to get some of you hard core coders to give my new Surfulater product a bash. In return everyone that provides any useful feedback, good, bad or otherwise will get a free copy.
In essence Surfulater lets you save information while you are surfing the web, be it selected text and images or complete web pages. It enables you to edit, annotate, cross reference, organize and search for information in its knowledge base. You no longer have to try and remember what web site specific information was on or worry about the site or information disappearing.
See www.surfulater.com[^] for more information. You can download Surfulater by simply registering on our forums or e-mail me for a direct download link.
Neville Franks, Author of ED for Windows www.getsoft.com and Surfulater www.surfulater.com "Save what you Surf"
|
|
|
|
|
PPL aren't you willing to help me here?
|
|
|
|
|
Well, this is a forum for software developers to find people to help test their software, or to co-develop with them, not for help on linux problems, so posting in a more appropriate forum would be better (and with a more clearly written question - I don't have a clue what you're asking!)
--
Help me! I'm turning into a grapefruit!
Phoenix Paint - back from DPaint's ashes!
|
|
|
|
|
Tipically I use TortoiseCVS when I use cvs in Windows. It has the option of using an RSH/SSH key to authenticate me instead of a password.
I'm trying to get cvs to work on the command line with my private key instead of a password so I can set up a build proccess with little human interaction. I've found the CVS_RSH environment variable and set that to my SSH aplication (TortoisePlink.exe), but I can't seem to be able to pass parameters to it (my private key).
Maybe I should be using a different cvs clien instead of the Tortoise package??
Thanks.
|
|
|
|
|
Guys I'm tired of the casino games you pick up at wal-mart... So I'm writing something better. I'm looking for ideas on ways to organize the AI. My experience with AI in college was pretty much limited to the Chess game we programmed. Computer suggests a move and then plays out an artificial game for about 4 moves ahead, repeats this for 3 or 4 possible moves, picks the best choice, and executes.Its a brute method and I'm wondering if anyone out there has any suggestions or could point me to some references.
|
|
|
|
|
I don't think the chess analogy will work with Texas Holdem'. There is to much luck involved.
I think I would develop a point scheme:
1) What are the odds that I currently have the best hand?
2) What are the odds that I could make it better?
3) How does the known betting history of my 'in' opponents effect these odds?
4) What is my position in the bettting sequence?
5) How much money do I have in relation to my 'in' opponents?
I would give points to these factors and decide to bet accordingly. I would then adjust the point system until I have achieved an adequate winning ratio. You can even adjust points to emulate different playing styles (beginner, aggresive, conservative, etc.).
Thats just off the top of my head, of course.
|
|
|
|
|
Hi,
Im playing around with a little grid/repeater for windows forms
http://www.compona.com/repeateralpha1.zip[^]
here is a short list of current features:
PanelRows , rows that behave like panels , where you can place controls
TableRows , like standard grid rows
TabRows , TabStrip container for child rows , each childrowtype will be placed in a separate tab
ShowParentRows , feature to force parent rows to be visible for the first visible row
this makes it possible to always see what data a row belongs to
no editing , selections , sorting or grouping is in place yet.
im currently working on xp and o2003 theme support.
need testers and feedback.
is it a good idea to be able to present data as the panelrows?
what features other than those listed would be good?
write to me at compona [at] gmail.com
//Roger
|
|
|
|
|
i Like to test your Grid
-----------------------------
"I Think It Will Help"
-----------------------------
Alok Gupta
visit me at http://www.thisisalok.tk
|
|
|
|
|
Pls anybody can evaluate
1) Does testing by third party will uncover all the errors in the program
2) Does Regression testing helps in removing the undetected errors
3) Does Automated tools are the ideal choice in the place of manual testing.
4)Pls any can eplain with the flowchart how defect is tracked and cleared.
Thanks In Advance
J.Pondurai
|
|
|
|
|
hi..
depends upon ur application..
what kind of it is and what kind of testing is required for it...
I mean either u want to know how much users it can support at time(stress)
how much secure application is and what kind of checks need to be tested.
If u let me know these things than perhaps i would be able to talk...
|
|
|
|
|
1) Does testing by third party will uncover all the errors in the program
No. Nothing uncovers all the errors in the program. If you were to rephrase the question to 'is testing by third party more effective?' then the answer is: 'only if your in-house testing skills are lower than that of the third party'. So look at your skill sets and those of the third party.
2) Does Regression testing helps in removing the undetected errors
I think you want to know if regression testing will help find defects that were missed in system testing. The answer is 'somewhat'. The prime focus of regression testing is to have an economic way to re-assure that the current release didn't break bits in areas other than where you made changes. Regression tests tend to be test cases that had been run in the original system testing. So if regression test cases find bugs it means your maintenance changes had a side effect that you were not aware of. Is this an error that was undetected in system testing? A matter of argument but besides the point.
3) Does Automated tools are the ideal choice in the place of manual testing?
No. Automated tools have their place but they are no replacement of good manual testing. Too many people try to do with manual testing stuff that is better done with automated testing. But inversely there is much that is not well testable in an automated fashion. Specifically in system testing manual testing is more and more effective. This is a long topic so I'll just make a few assertions:
- manual testing discovers more bugs than automated because manual testers are more flexible
- building a robust automated test case takes about 10 times the effort required to do the test case manually - so it is only worth where you would run the test more than 10 times
- building robust automated test cases is a Software Development task. You need to provide the skills, processes and infrastructure to support it. Otherwise you are wasting your money.
Stephan
|
|
|
|
|
Hi I have written a DbfReader and a DbfWriter class to read and write DBASE III IV and IV files using the binary structure of the files. The idea is to be able to deal with DBASE files without the help of any kind of dbms interaction (as you would deal with a CSV file or other delimited file).
I currently have a working version for DBASE III IV and IV.
I would like to extend this to the other versions of DBASE / Foxpro, including the (formerly) borland flavor.
If anyone is interested in helping with this project, or just using or seeing what I've done the VS.NET project and a test app are available at:
http://softwarebybrian.com/html/dbffiles_net.html
You can email me from that site if you want and I'll respond.
Thanks
|
|
|
|
|
Hi folks, I'm an indie programmer, and started a C# project about a year ago. It's a business app. Two old clients (they had my Windows 3.1 version, in Foxpro!) have bought the program, and very competent friends are ready to help market it in its modern form.
If you are good and impressively fast, I would be glad to make a profit-sharing agreement with you. That option is likely to amount to good pay, and a future position that you can do from anywhere. (Yippee!) However, the pay will come in with sales, so it'll take awhile. Alternately, I can pay a fixed amount upon completion -- but only around $5,000. I think we can complete the project in two months.
Cheers,
Adam Weisberg
Ohio USA
|
|
|
|
|
I would be interested in this idea. Email me some time and lets talk.
|
|
|
|
|
Well, I am Shadman Sadekeen (BE Computer Science) from Bangalore. I would like to have a talk with you about the project and tearms & condition. My e-mail id is shadman_103@yahoo.com. Plz mail me.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
