Visual Strdio.NET 2003 debugger Newbie - C / C++ / MFC Discussion Boards

QQrutxu19-Oct-04 13:41

19-Oct-04 13:41

Hi,

I am developing a dll in C and I have one problem that I don't know how to solve...

An external application invokes my dll by calling the function:

int calculateParameters(int, int)

I need to return to the application the value "OK" indicating that the passed parameters are correct as soon as possible, and then do the needed calculations and pass the result of the calculations to the external application using a callback function.

How can I do so that after the function returns "OK", the previously created thread could continue alive and do the appropiate calculations and invoke the callback funtion?

Here is the simplified code of this dll:

// Function invoked from the external application
int calculateParameters(int a, int b)
{
_beginthread(sumParameters, 0, valorTmp); //Create a thread to calculate
if (a > b) return OK; //As soon as this function returns, the thread previously created is stopped and no calculation is done
}

//Function needed to perform the internal calculations
void sumParameters(void *valorTmp)
{
z = a + b; //Example of calculations
Callback(y); //Pass the result of the calculations to the external application
}

Thank you very much for your help

Tab controls in CDialog

Geoff Hunter19-Oct-04 13:39

Geoff Hunter

19-Oct-04 13:39

Hi All,
I am working with a CDialog object that opens three other dialogs using a tab control. I seem to be getting stuck trying to pass commands back to the main dialog so they can be sent to the comm port all together.
How can i either trigger an event handler from the tabbed dialog into my main dialog or change variables and call functions in my main dialog from the three dialogs that are created by the first.
I have tried right clicking on buttons and controls on my tabbed dialogs and adding event handlers to the main dialog but they do not seem to give a responce. Is there any code that i should add to get the main dialog to recognise an event that is not triggered by the dialog that it directly creates?
Any help would be great.

Geoffreyhunter

Re: Tab controls in CDialog

pubududilena19-Oct-04 23:53

pubududilena

19-Oct-04 23:53

hi,
I think this will help u..
please read this:-
http://www.codeproject.com/dialog/killpopups.asp[^]

Full Unicode support in MBCS compiled application

McTrump19-Oct-04 13:05

McTrump

19-Oct-04 13:05

I want an Edit Control in my application (which compiles in MBCS, I can not easily change that) to accept Unicode.

So far, I have been successful in the sense that my control takes Chinese, Japanese, Greek etc., but it still does not take Indic languages (e.g. Hindi).

I created the control via CreateWindowExW():

<br />
        // create new window<br />
        RECT r;<br />
	r.top = 90;<br />
	r.left = 40;<br />
	r.bottom = 150;<br />
	r.right = 170;<br />
<br />
	HWND edithwnd;<br />
	edithwnd = CreateWindowExW(<br />
		WS_EX_NOPARENTNOTIFY,<br />
		(WCHAR*)L"Edit",	// classname of the standard edit class<br />
		NULL,			// window title<br />
		WS_VISIBLE | WS_CHILD,	// styles	<br />
		r.left,			// coordinates<br />
		r.top,<br />
		r.right - r.left,<br />
		r.bottom - r.top,<br />
		this->m_hWnd,		// parent window hwnd<br />
		(HMENU) MAKEINTRESOURCEW(988),	// Child window ID<br />
		AfxGetInstanceHandle(),	// instance of the executable<br />
		NULL<br />
	   );<br />

I created the control inside a dialog which was derived from the MFC class CDialog. I create the control in the OnInitDialog() function of the dialog.

Well, this edit control does apparently support Unicode, but not to the full extend, since it does not accept the aforementioned Indic languages. I have already tried the various subclassing / superclassing approaches which are described on MSDN, but with the same result.

I found an example from Microsoft:

http://www.microsoft.com/msj/0499/multilangunicode/multilangunicode.aspx[^]

Here, F.A. Bishop uses the DialogBoxParam() function to create a dialog box from a resource. This dialog DOES support Hindi! I tried it in my test program and it worked. According to the MSDN documentation, DialogBoxParam() basically uses a createwindowex to create the dialog and the edit control.

Therefore I assume that my problem is connected to the dialog I create it in... but how....? Do I also have to create the containing dialog with CreateWindowExW() ? And if yes, how can I "adjust" my MFC-dialog in that way ?

Thanks for your help!

MRU Files on a Lower Level Dialog

Grahamfff19-Oct-04 11:07

Grahamfff

19-Oct-04 11:07

I have a MFC dialog application with many modeless dialogs. Now I wish to have one of these dialogs use the Most Recently Used files option.

The Main dialog uses the MRU option OK. But nothing works for this sub-window. Both are using the same ID_RECENT_FILES resource.

Is it possible to use MRU in two places?

Graham.

grahamfff

Catching the ScrollBar on Clistcontrol

purshi19-Oct-04 10:58

purshi

19-Oct-04 10:58

Hi Friends,

I am struck up with catching verticall scrollbar on ClistControl.

I have dialog box. which contains Listcontrol. but i am trying to catch wm_vscroll event on scrolling vertically. since this message belongs to window. event is not triggedred.

I am new to vc++6.0. Please reply to this post.

I am stuggling on his.

Please send me the reply to purushothambc@orange.co.uk or bcpurshi@rediffmail.com

Your help is appreciated.

Thank in advance
Purushotham

How to change the screen layout after resolution change?

tserg19-Oct-04 10:34

tserg

19-Oct-04 10:34

Hi, gurus:

Does anyone know how to change the screen size layout programmatically?

This is the case:
I am changing the screen resolution programmatically for specific action from 800x600 to 1280x1024. Because the ratios are different for these resolutions the screen layouts are different. In the second case the screen layout compressed from the sides. I need to expand the layout from the sides for the size of monitor.
Any suggestions?

Thanks in advance

Visual Strdio.NET 2003 debugger Newbie

...---...19-Oct-04 10:22

...---...

19-Oct-04 10:22

I'm currently writing some basic MFC Apps to make sure I really "know what I'm doing", but I'm having a hard time understanding how to use the debugger for event driven programs.

Could someone suggest a solid tutorial or article that would be helpful?
- Thanks a lot.

Re: Visual Strdio.NET 2003 debugger Newbie

Wes Aday19-Oct-04 10:38

Wes Aday

19-Oct-04 10:38

Well.... that's a pretty big subject. I do not know of any tutorials or articles dealing with that.

Any specific information that you need?

Artificial intelligence is no match for natural
stupidity.

WMI Tutorial ? (wifi signal strength & c++)

zoid ! 19-Oct-04 10:01

zoid !

19-Oct-04 10:01

Does any one know of a good starting point for learning more about WMI (Windows Management Instrumentation) ?

Specifically, I have found that this seems to be the perferred way of monitoring signal strength of wireless adapaters on winXP... and I would like to find an introduction WMI. I have found .net examples but I don't like .net Poke tongue | ;-P

.

thanks Tom.

ps.. it all started with this question:

http://www.codeproject.com/script/comments/forums.asp?forumid=1647&select=951615&df=100&tid=951615#xx951615xx

Re: WMI Tutorial ? (wifi signal strength & c++)

User 21559719-Oct-04 20:05

User 215597

19-Oct-04 20:05

Check the following link -
WMI[^]

Also I found some good stuff about WMI in "Programming the Microsoft Windows Driver Model" book by Walter Oney few months back.

Hope this helps Smile | :)

-------------------------
Have a great day ahead!
Regards,
Sohail Kadiwala
(My COM Blog - http://lovecom.blogspot.com)

modified 21-Apr-21 21:01pm.

Picture Control

Leyu19-Oct-04 9:49

Leyu

19-Oct-04 9:49

I was using the picture box control and i loaded a bitmap to it from the resource using the properties dialog box, i wanted to manipulate the image from the code and i wanted to create a member variable so i changed the ID from IDC_STATIC to another and the only member variable for control and value is CString nothing as i Assumed of CBitmap or another.
Well my ? is can i use this control to modify the contents of the bitmap at run time if so how do i do it?
isn't there any class in which my picture box can map in to like HBITMAP,CBitmap or another ?

Thanks Smile | :)

Re: Picture Control

Vikram Kashyap19-Oct-04 19:14

Vikram Kashyap

19-Oct-04 19:14

Hi,;)

Yes, Certainly you can change the bitmap at run time during the MOUSEMOVE or on LBUTTONDOWN. Let's take the example of MOUSEMOVE

void CMouseDlg::OnMouseMove(UINT nFlags, CPoint point)
{
m_Image.GetWindowRect(&rect);
ClientToScreen(&point);
if(rect.PtInRect(point))
{
m_Image.SetBitmap(m_Bitmap1);
}
else
{
m_Image.SetBitmap(m_Bitmap2);
}
CDialog::OnMouseMove(nFlags, point);
}

Here m_Image is the control type variable of Image control created using Class Wizard and rect is CRect object.

// m_Image.GetWindowRect(&rect);
Extract the image control co-ordinates in a rect object.

// ClientToScreen(&point);
ClientToScreen is used to convert the client coordinates of a given point or rectangle on the display to screen coordinates.

Next step is to check whether these points fall under the area where our image is place on the screen using PtInRect. If yes, then change the bitmap to whatever.

m_Bitmap1 and m_Bitmap2 are twom CBitmap type objects defined in the header file.

That's it...you r on ur way to change the bitmaps at runtime

Vikram Kashyap
"You will never fail until you stop trying"

Proper function declaration to avoid a memory leak

georgiek5019-Oct-04 8:47

georgiek50

19-Oct-04 8:47

I have a function which returns a char* and I am trying to avoid a memory leak.

So far it is in this format:

char* MyFunction(char *szBuffer)
{
char *szTmpBuffer = new char[strlen(szBuffer) + 1];

...function body...

return szTmpBuffer;
}

And it is called somewhat like this:

char *szBuffer = MyFunction(szString);

but if after I use szBuffer I try to delete it:

delete [] szBuffer;

I get a Debug Assertion failed...so the question is, what is the proper way to call new within a function then delete the pointer outside of the function w/o causing errors and avoiding memory leaks?

Re: Proper function declaration to avoid a memory leak

David Crow19-Oct-04 8:56

David Crow

19-Oct-04 8:56

You code is fine. I tried it and no assertion was fired. What line/file does the assertion message indicate?

"Opinions are neither right nor wrong. I cannot change your opinion of me. I can, however, change what influences your opinion." - David Crow

Re: Proper function declaration to avoid a memory leak

Joaquín M López Muñoz19-Oct-04 9:06

Joaquín M López Muñoz

19-Oct-04 9:06

The handling of szTmpBuffer you show is OK. Most likely, you're overwriting the allocated space. What does the debug assertion message look like? Something about damaged blocks?

Joaquín M López Muñoz
Telefónica, Investigación y Desarrollo
Want a Boost forum in Code Project? Vote here[^]!

Re: Proper function declaration to avoid a memory leak

georgiek5019-Oct-04 9:12

georgiek50

19-Oct-04 9:12

Exactly:

DAMAGE: after normal block (#3604) at (memory address)

Re: Proper function declaration to avoid a memory leak

georgiek5019-Oct-04 9:16

georgiek50

19-Oct-04 9:16

Yep, I was overwriting...thanks for pointing out my stupid mistakes Poke tongue | ;-P

Resize a Static Box to accomodate font change

Ali Niaz19-Oct-04 8:40

Ali Niaz

19-Oct-04 8:40

I needed some help with resizing the size of the Static box after I have changed the font size. I want to dynamically change the size of the box so that it perfectly fits the text inside it. I wanna do this because I want the box border to fit the text inside.
i've tried :

CDC* pDC = pOrderText->GetDC();
CString text;
pOrderText->GetWindowText(text);
CSize stringSize = pDC->GetTextExtent(text);
pOrderText->SetWindowPos(NULL, 0, 0, stringSize.cx *1.45, stringSize.cy *1.45, SWP_NOMOVE|SWP_NOZORDER|SWP_NOREPOSITION);

buts the conversion is not working well. Need help asap!

A

Re: Resize a Static Box to accomodate font change

BlackDice19-Oct-04 9:58

BlackDice

19-Oct-04 9:58

Try getting the ratio of the windowsize/textsize before you change the font. Or, maybe you can use DrawText() with a flag of DT_CALCRECT to get the size of the rectangle needed by your control, then use the rect's width and height properties to set the width and height for your call to SetWindowPos()

Who are all these people and what are they doing in my house?...Me in 30 years, inside a grocery store

My articles[^]

bdiamond Sleepy | :zzz:

Re: Resize a Static Box to accomodate font change

Ali Niaz19-Oct-04 11:28

Ali Niaz

19-Oct-04 11:28

I tried this as well. But it still does not reflect the change in the font when it draws the text. Any other suggestion.?
Right now I am doing the hardcoded windowsize/textsize , but its not perfect in all the scenarios.

ali

Re: Resize a Static Box to accomodate font change

BlackDice20-Oct-04 5:59

BlackDice

20-Oct-04 5:59

I think I might have misunderstood you. Is the font size not changing at all, or is the font size changing and the window size not changing?

Who are all these people and what are they doing in my house?...Me in 30 years, inside a grocery store

My articles[^]
bdiamond Sleepy | :zzz:

Re: Resize a Static Box to accomodate font change

Ali Niaz20-Oct-04 10:33

Ali Niaz

20-Oct-04 10:33

the font size is changing but the window size is not changing accordingly.

ali

Re: Resize a Static Box to accomodate font change

Ali Niaz19-Oct-04 10:11

Ali Niaz

19-Oct-04 10:11

Anybody?

Question regarding Forms App in VC++ .NET

NietzscheDisciple19-Oct-04 8:01

NietzscheDisciple

19-Oct-04 8:01

Hello All,

I'm new to coding in VC++ .NET, but have some experience writing applications in C# .NET.

I'm in the process of writing an app for which most of the code is in C++.

My question is this:

1. Can I use the Designer in my VC++ project (modifying the file Form1.h) to create the GUI?

OR

2. Do I need to follow the method suggested in the following LINK and design the GUI in a C# file and then tie it to the C++ code?

Which approach is preferable?

Thanks!

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.