|
Arigato Gozaimashita Michael-san. That's a little gem my colleague will appreciate. 
Do you know why a process drops a lot of memory when its windows are minimized by the way? Open task manager, and look at let's say devenv.exe. Minimize it and you'll see a huge drop in memory consumption. Do you have any idea what that's all about? I suppose it's just a "trick" as the VM size doesn't change a bit.
--
Arigato gozaimashita!
|
|
|
|
|
Iie, dou itashimashite!
I remember seeing on RaymondC's blog that when you minimize a window, its memory is immeidately marked for swapping, so it will be one of the first bits of memory swapped to disk if some other app needs more physical RAM.
OT: I think you asked a while ago about the spalling of "gozaimashita". There is a pronunciation rule that [i] and [u] become voiceless between voiceless sounds. So in "shita", [i] is between [sh] and [t] (both voiceless) so the [i] becomes voiceless as well, and the sound blends into the [sh] part. (Sorry if this is too technical, I don't really know how to explain it without using linguistic terms.)
When you write "gozaimashita" it is 6 characters (go-za-i-ma-shi-ta) and the romanization reflects that.
--Mike--
Personal stuff:: Ericahist | Homepage
Shareware stuff:: 1ClickPicGrabber | RightClick-Encrypt
CP stuff:: CP SearchBar v2.0.2 | C++ Forum FAQ
----
"Linux is good. It can do no wrong. It is open source so must be right. It has penguins. I want to eat your brain."
-- Paul Watson, Linux Zombie
|
|
|
|
|
Michael Dunn wrote:
When you write "gozaimashita" it is 6 characters (go-za-i-ma-shi-ta) and the romanization reflects that.
Ah, so basically, "shi" is a hiragana(?) character, and "shi" is its name? I guess the same applies to our alphabet. H's name is "age", but it's not pronounced that way when used as part of a word.
Michael Dunn wrote:
There is a pronunciation rule that [i] and [u] become voiceless between voiceless sounds.
Do you know the official explanation of why [u] isn't pronounced in words such as desu? I read on a webpage that only speakers of old dialects pronounce [u], and that it has apparently been optimized away with time. The web page I read it on didn't seem all that serious (rude japanese expressions was a large part of the repertoire).
--
Arigato gozaimashita!
|
|
|
|
|
Jörgen Sigvardsson wrote:
Do you know the official explanation of why [u] isn't pronounced in words such as desu?
Ah, actually I left out something in my earlier post. [i] and [u] also become voiceless after a voiceless sound when they are at the end of a word, such as in "desu" or the verb ending "masu".
This is a common phenomenon in languages, unstressed vowels can be "reduced" since they aren't the focal point of the word. For example in English, "several" is usually said as two syllables "sev-ral" with the middle "e" being dropped entirely. A similar thing happens with consonants in many languages, eg German and Russian. In German "tag", the [g] becomes devoiced to [k].
--Mike--
Personal stuff:: Ericahist | Homepage
Shareware stuff:: 1ClickPicGrabber | RightClick-Encrypt
CP stuff:: CP SearchBar v2.0.2 | C++ Forum FAQ
|
|
|
|
|
Excellent!
I wanted my little process to return from the ~4MB it jumped to after using the COM objects, to the ~2MB it started from -- this call popped it all the way down to ~500KB.
Thanks a million! ...or should I say thanks 3.5 million?
Matt Gerrans
|
|
|
|
|
Hi,
I have a componenet developed in C#.Net which will fire an event. The .Net component will send two parameters of type object (typecode : System.String )with that event.
I used the tlb file of that component for my VC++ client.
In the corresponding .tlh file generated by the VC++ compiler, the signature of the event handler is like
HRESULT HandlerforEvent (
const _variant_t & send,
const _variant_t & tkInfo );
I have done the following in my VC++ application.
1. I have created a class derived from IDispEventSimpleImpl
2. I used SINK_ENTRY_INFO with _ATL_FUNC_INFO as one of the parameter.
_ATL_FUNC_INFO OnEventInfo = {CC_STDCALL, VT_HRESULT, 2, {VT_BSTR,VT_BSTR}};
3. I have written a handler for the event.
4. Inthe CPP file,
I get the address using cocreateinstance and I used the DispEventAdvise for my object. Also I have written the implemention code for the event handler.
But still I am not able to capture the event from the component.
Can any one of you please tell me the solution for my problem... or is there any other way to capture the event from a .Net component in VC++.
Thanks
Kannan
|
|
|
|
|
I met a same problem before! I suggest that you created a singking class derived from IDispEventImpl.
you get the address using cocreateinstance and then call AtlGetObjectSourceInterface to get m_iid and m_libid, then use DispEventAdvise
to capture the event from the component!
andy_cn
|
|
|
|
|
HI,
I m new to ATL DLL
I want to make a Dll from which i want to get the functionality of CSocket class through ASP.NEt.
I run the ATL COM wizrad use ATL DLL , soporting MFC , proxt stub , MTS all ..
I added a MFC Class CSock Inherited from CSocket class.
When i compile it . it gives error .
CSocket undefined ???????????
How i can handle it.
and i want to use this DLL for ASP.NEt page to give the functionalty to a ASP.Net page connect to a client application through IP and Port.
m i doing a right solution. means ATL DLL , and use this DLL behind a ASP.NET page.
and tell me y CSocket is Undefined
thanx
Regards.
|
|
|
|
|
I have a ATL dialog class based on CAxDialogImpl. And I have added message handler for WM_CREATE for it:
BEGIN_MSG_MAP(CMyDialog)
...
MESSAGE_HANDLER(WM_CREATE, OnCreate)
MESSAGE_HANDLER(WM_DESTROY, OnDestroy)
CHAIN_MSG_MAP(CAxDialogImpl<cmydialog>)
DEFAULT_REFLECTION_HANDLER()
END_MSG_MAP()
And when instance of it is created through:
CMyDialog dlg;
dlg.Create(::GetDesktopWindow());
it does not receive the WM_CREATE notification.
Interestingly, it Does receive WM_DESTROY notification.
Am i missing something?
|
|
|
|
|
Dialogs don't receieve WM_CREATE. They do receive WM_INITDIALOG though - that's the message you want to trap. This applies for all dialogs, active x or not.
--
Arigato gozaimashita!
|
|
|
|
|
I need to take an opinion on whether our approach is right (described below):
Problem
We have a ATL windows service which also exposes one COM class - say MainServer. MainServer interacts with other internal COM objects and a VB ActiveX control. Client application can instantiate MainServer component and fire some methods on it. The VB ActiveX control needs a form container - so we are using ATL dialog (invisible, modeless) to host it. And fire methods on the dialog.
Output
Service when tested through control panel GUI, it works perfectly and we can fire methods on ActiveX control through its container in ServiceWinMain(), Run() and other methods.
But when tested with Client application which instantiates MainServer and fires methods, we have an unspecified exception.
My questions are:
1. Is it possible to host ATL dialog like I mentioned in a Windows service?
2. What is the best way to make this application thread safe?
3. Is this approach right?
|
|
|
|
|
Someone wrote:
2. What is the best way to make this application thread safe?
Is STAs possible when running as a service? If so, then COM solves it for you. If not, I'd use the locking mechanisms built into ATL to protect the COM objects against unsafe parallell access.
I suppose your COM component inherits from either CComObjectRoot or template <typename ThreadingModel> CComObjectRootEx. Make sure you inherit from CComObjectRootEx<CComMultiThreadModel> and use the Lock() and Unlock() methods appropriately. You can also use the type ObjectLock if you need to lock temporarily using the RAII idiom. ObjectLock lock(this); calls Lock() at construction time and Unlock() at destruction time.
Other than that I can't be of much more help as I don't have experience with COM servers in services.
--
Arigato gozaimashita!
|
|
|
|
|
Thanks Jörgen,
Solution did not require me to use Locks. But your answer did give a spark to think in a particular direction and finally I reached a solution.
Suchit.
(why doesn't my name appear besides by posting? I am logged in using my CodeProject ID).
|
|
|
|
|
You're welcome! May I ask how you solved it?
Someone wrote:
why doesn't my name appear besides by posting? I am logged in using my CodeProject ID
I believe it's because you are using HTML commands in your name. Your name shows up as <font face= in the email notification. Try changing your CP settings.
--
Arigato gozaimashita!
|
|
|
|
|
I am sorry about saying that this problem is solved.
Actaully the problem of crash/exception remains where it was.
However initially hosting activex control in invisible, and modeless ATL dialogs was not achieved by me, now it is possible.
|
|
|
|
|
I oftenly encounter the need of using the ATLControls.h header file for compiling some of the ATL codes. But according to the source codes. It is not supported by Ms. Any better replacement for this or there are updated version of similar kind.
thank you.
Sonork 100.41263:Anthony_Yio
|
|
|
|
|
You've probably seen atlctrls.h, which is a WTL header file (despite its atl prefix).
--
Arigato gozaimashita!
|
|
|
|
|
|
Hi!
I've implemented a thumbnail extension for windows xp explorer by implementing the IExtractImage interface. The super weird part is about windows passing the desired BPP on GetLocation().
In Explorer: When the left bar, with the Information box, is active: windows requires 32bpp. And shows my image stretched (as wide as possible, and then super heigh).
When in normal thumbnail mode, windows requires 24bpp: but it won't show the thumbnail unless it's 1bpp or 32bpp! If I force feed it 32bpp the thumbnail is shown nicely (not stretched as in the Information box).
Does anyone have any idea as of why? 
Thanx
/JP
|
|
|
|
|
Hello
I have used standard template library in one of my applications. I belive that memory leaks are due to stl components, mainly string. i wrote a sample program in VC 6.0 that clearly shows memory leaks in stl
wstring str = L"";
for( int a = 0 ; a < 100000 ; a++ )
{
str += L"int";
}
str.str.erase( str.begin() , str.end() );
str = L"int";
i wrote this code against a button in dialog based application. Before clicking the button, the memory usage is 3MB and after this code it is 17MB although i believe it should have been back to 3MB after the statement str.str.erase( str.begin() , str.end() ).
My other observation is that if i exit the application in debug mode it tells almost everything about the memory leaks except for the file from which memory was allocated. I copied a code that would tell the file but it would all leaks are from crtdbg.h
i need to know how to get memory statistics low.any help in this regard will be highly appreciated.
P.S. I have been using Task Manager to see how much memory is bieng used by my application.
Regards
Omar Javed
|
|
|
|
|
str.erase( str.begin() , str.end() ) does not delete the storage the string uses. Try str.swap(wstring()). This swaps str with a temporary wstring and then should destruct the temporary, freeing the storage originally used by str.
HTH
Stuart Dootson
'Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p'
|
|
|
|
|
Shouldn't a call to reserve() do fine?
--
...Coca Cola, sometimes war...
|
|
|
|
|
Hmmm - I thought string was like vector - which it isn't entirely, now that I check - you can call reserve to aattempt to reduce the amount of allocated storage.
However, both the C++ Standard and MSDN say that it's non-binding (i.e. the library doesn't have to honour your request). And the STL with VC++ 7.1 doesn't honour requests with capacity less than the current size (i.e. it won't shrink strings). So half a mark each - strictly, you can try to use reserve like this, but in practise, it doesn't shrink string allocations.
Stuart Dootson
'Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p'
|
|
|
|
|
That sounds like bad design. They ought to replace the reserve() function and with a set_capacity() function IMO.
--
...Coca Cola, sometimes war...
|
|
|
|
|
I'm having quite a problem. I have a class that has this attribute: a vector template. Something like the following:
<br />
extern "C" class __declspec(dllexport) AnotherClass { ... };<br />
<br />
extern "C" class __declspec(dllexport) MyClass<br />
{<br />
private:<br />
vector<AnotherClass> m_vecClass;<br />
};<br />
When I compile it, I get this warning message:
warning C4251: 'm_vecClass' : class 'std::vector<AnotherClass,class std::allocator<class AnotherClass> >' needs to have dll-interface to be used by clients of class 'MyClass'.
I don't know what to do, though I guess I should do something like
<br />
__declspec(dllexport) vector<AnotherClass> m_vecClass<br />
Still, it is not working.
I hope someone can help me. Thanks a lot.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
