|
Hello there. You should take Dave's point. When you ask for complete solutions, realize that most of the folks who answer questions on these forums are professionals who are paid for developing complete solutions.
Also know, that there are many (like Dave) who believe in contributing to the community and are willing to donate their time to answer questions of a specific nature - to assist other developers through a specific problem, but not to do their work for them.
There are many kind souls here. Please post a specific question rather than a request for a complete solution and you'll likely see a great deal of kindness in the response.
|
|
|
|
|
Anybody out there who can provide me with the complete codes for sending email.. Need it for my project also.. Thanx...
Peace to the WOrld!!
|
|
|
|
|
bearnini wrote:
provide me with the complete codes for sending email
That's the wrong question to ask around here. We're not doing homework for anyone. We'll help you with specific questions/problems you have, but we're not a One Stop Source Code Shop.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I was wondering how to create a program with an option to load external modules. Can you load vb modules at runtime? I mean, a file with code and create modifications to the forms of the program? Or should I look for a different method?
Anyone experience with this concept, because it is commumly used in bussiness software...
Greetz 
JT
|
|
|
|
|
Anybody out there who can help me asap.. I'm doing a school project on online learning. I'm doing the teacher's part where i need to set online quizzes for the student to do and upload documents online for the students to print.. I need the codings for this application asap and very urgently... Please help me for those kind hearts out there...
Peace to the WOrld!!
|
|
|
|
|
bearnini wrote:
I need the codings for this application asap and very urgently...
That's a pretty broad request, don't you think? How about you give it your best shot and ask for help on *specific* issues that you run into. This is not the best place to look if you want your entire homework project done for you.
Charlie
if(!curlies){ return; }
|
|
|
|
|
i was relieved when i came across ths superb website.. Thought that i would get help in here.. I'm really not good in VB.net programming.. stupid.. i just need to complete my project asap.. its ok if u all cant help me at al.. anyway thanx.. If i'm a genius, i don mind going thru the extra mile to help someone who is really in need..
Peace to the WOrld!!
|
|
|
|
|
I don't recall enrolling you in your class. I don't recall impeding your progress so that you are running up against a hard deadline. I only recall being asked to complete your project for you.
I (among many others) am happy to help with specific issues (I'm not a genius, but I manage to get by), but this website would be much less "superb" if it turned into a one-stop homework shop.
Charlie
if(!curlies){ return; }
|
|
|
|
|
"Really in need", we'll help. But doing you homework for you isn't "Really in need", it's just plain lazy.
We'll help you if you have specific questions about something your having problems with. We won't help you with the problem of "Procrastination"!
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
No matter what SMTP server I use, my program has the same error when I try to send the message, "Could not access 'CDO.Message' object." Does anyone know what this is and what I can do to avoid it?
boom!
|
|
|
|
|
Do you have Outlook installed? (the Office version, not Express!)
You'll need the Collaboration Data Objects (CDO) to use the System.Web.Mail namespace, preferably version 1.21 or better. There is no place to download it from!! (Legally, that is...) You'll need to install Outlook 98 or 2000, 2002, or 2003 to get it, or it comes with Windows 2000 Server, Exchange Server 5.5 SP1 or better, or Exchange Server 2000 or 2003.
It does NOT come with Windows 2000 Professional, XP, or any version of Outlook Express!
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Thanks, installing Microsoft office really helped. 
y helothar noob
|
|
|
|
|
I am using BeginInvoke on a delegate to start a Sub. What will happen if I do not call EndInvoke on that delegate? I do not particularly need to monitor it or need to know if it is finished. I tried using threading but did not get it to work. Still trying though.
|
|
|
|
|
You might want to read Asynchronous Method Execution Using Delegates[^] on MSDN. Invoke and launching background threads are not 100% interchangable. Wheather one is better than the other depends on what you want to be done in the background. Sooo...
What are you doing on the background thread?
Are you having any problems with BeginInvoke/EndInvoke?
What were the problems you had with threading?
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I'm checking for application updates on the background thread. My application does this once per day similar to Windows Automatic Updates. The problem I had with threading is that I was not able to pass arguments to the procedure I was calling. However, I've figured a way to work around that by making the arguments available to the procedure (thru a config file it reads). The question I had with BeginInvoke is what would happen if I do not call EndInvoke on that delegate? Will it just exit after it has done it's work. What would happen if the delegate i've invoked goes out of scope but the method invoked is not finished? Will the method being invoked keep working until it finishes? Or will it just exit or worse?
|
|
|
|
|
This is something that's usually done by a seperate app, not a component. The application usually launches the update app which goes off on it's own and checks for updates and downloads them. Some communication with the parent app is possible through Remoting. If the user requests that the update be installed now, it tells the updater to do so and quits. The updater continues on and installs the updates, then could optionally relaunch the new version of the parent app.
BeginInvoke returns an IAsyncResult object, that can be ignored without any consequences. You don't have to do anything with it or dispose it. You also don't have to call EndInvoke, unless you want any return values from your method call. The delegate you invoke won't go out of scope until it's done executing. Remember its on its own thread and executing completely independent of the thread that called it. It will keep running until it runs out of code to execute or fails and throws an unhandled exception. The problem with an exception is you won't know it happened on your main thread because exceptions don't cross thread boundries, unless you call EndInvoke. Any exception that was thrown on the background thread will finally be re-thrown on your main thread only upon calling EndInvoke.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hi, i used to develop an application in Ms access. Because my form is too big, i set the scroll bar for my form. But now I want to design my new project for vb6 but I can't find scroll bar property in my form property sheet. To solve this problem, I create MDI and SDI form (whether my form is too big but MDI has a scroll bar. Does anybody know how to set a scroll bar on SDI form?
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
In VB6 you can't.
There are various hacks (nested control containers) but they were always troublesome for me.
Paul Watson wrote:
"At the end of the day it is what you produce that counts, not how many doctorates you have on the wall."
George Carlin wrote:
"Don't sweat the petty things, and don't pet the sweaty things."
Jörgen Sigvardsson wrote:
If the physicists find a universal theory describing the laws of universe, I'm sure the a**hole constant will be an integral part of that theory.
|
|
|
|
|
in vb 6 when i copy a control in designing form and paste it automatically i get array of controls ...
what can i do in vb .net
|
|
|
|
|
As far as I know VB.NET doesn't have the control array. But you can do it by difference method, but I'm not sure too. Does anybody have an idea about that?
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
Create all your controls then what ever events you want to use (the click event for example) use the AddHander method to connect the event for each control to a common handler function.
Paul Watson wrote:
"At the end of the day it is what you produce that counts, not how many doctorates you have on the wall."
George Carlin wrote:
"Don't sweat the petty things, and don't pet the sweaty things."
Jörgen Sigvardsson wrote:
If the physicists find a universal theory describing the laws of universe, I'm sure the a**hole constant will be an integral part of that theory.
|
|
|
|
|
|
i need to bind a datagrid to a data reader,
i also want to be able to make use of the datagrids
data editing abilities, is it posible to take changes made to the data grid
and use the datareader to update the database table and or relevant fields??
plz help
thanx
Afzal Hassen
|
|
|
|
|
The DataReader classes are forward-only readers. They really can't make updates to your database. If you want edit capabilities in your datagrid, you'll have to use a DataAdapter instead. SqlDataAdpeter class docs[^]
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hi there -
i defined the following, serializable class. main focus lies on the attribut img, which is an byte array.
Imports System.Drawing
Imports System.Runtime.Serialization
Imports System.Runtime.Serialization.Formatters
<serializable()> Public Class ScreenShot
Private Declare Function CreateDC Lib "gdi32" Alias "CreateDCA" (ByVal lpDriverName As String, ByVal lpDeviceName As String, ByVal lpOutput As String, ByVal lpInitData As String) As Integer
Private Declare Function CreateCompatibleDC Lib "GDI32" (ByVal hDC As Integer) As Integer
Private Declare Function CreateCompatibleBitmap Lib "GDI32" (ByVal hDC As Integer, ByVal nWidth As Integer, ByVal nHeight As Integer) As Integer
Private Declare Function GetDeviceCaps Lib "gdi32" Alias "GetDeviceCaps" (ByVal hdc As Integer, ByVal nIndex As Integer) As Integer
Private Declare Function SelectObject Lib "GDI32" (ByVal hDC As Integer, ByVal hObject As Integer) As Integer
Private Declare Function BitBlt Lib "GDI32" (ByVal srchDC As Integer, ByVal srcX As Integer, ByVal srcY As Integer, ByVal srcW As Integer, ByVal srcH As Integer, ByVal desthDC As Integer, ByVal destX As Integer, ByVal destY As Integer, ByVal op As Integer) As Integer
Private Declare Function DeleteDC Lib "GDI32" (ByVal hDC As Integer) As Integer
Private Declare Function DeleteObject Lib "GDI32" (ByVal hObj As Integer) As Integer
Const SRCCOPY As Integer = &HCC0020
Private FW, FH As Integer
Public Shared img As Byte()
Public Sub CaptureScreen()
Dim info As SerializationInfo
Dim hSDC, hMDC As Integer
Dim hBMP, hBMPOld As Integer
Dim r As Integer
hSDC = CreateDC("DISPLAY", "", "", "")
hMDC = CreateCompatibleDC(hSDC)
FW = GetDeviceCaps(hSDC, 8)
FH = GetDeviceCaps(hSDC, 10)
hBMP = CreateCompatibleBitmap(hSDC, FW, FH)
hBMPOld = SelectObject(hMDC, hBMP)
r = BitBlt(hMDC, 0, 0, FW, FH, hSDC, 0, 0, 13369376)
hBMP = SelectObject(hMDC, hBMPOld)
r = DeleteDC(hSDC)
r = DeleteDC(hMDC)
Dim oBackground As Bitmap
oBackground = Image.FromHbitmap(New IntPtr(hBMP))
Dim formatter As New System.Runtime.Serialization.Formatters.Binary.BinaryFormatter()
Dim ms As New System.IO.MemoryStream()
formatter.Serialize(ms, oBackground)
img = ms.GetBuffer()
ms.Flush()
End Sub
Public ReadOnly Property _getImage() As Byte()
Get
Return img
End Get
End Property
End Class
now i want to transfer an object of this class by remoting, doing the following:
Dim getScreenShot As New Interfaces.ScreenShot()
Try
getScreenShot.CaptureScreen()
remServer._giveScreenShot(getScreenShot)
Catch e As Exception
MessageBox.Show(e.ToString)
End Try
This calls a function on the server, that looks like this:
Public Sub _giveScreenShot(ByVal screenShot As Interfaces.ScreenShot) Implements IServer._giveScreenShot
Dim _ms As New System.IO.MemoryStream()
_ms.Write(screenShot._getImage, 0, screenShot._getImage.Length)
Dim _bmp As New Bitmap(_ms)
_ms.Close()
Me._schoolMain.Screenshot.Image = CType(_bmp, Image)
End Sub
the problem i have: the _getImage Method of my screenShot-Object returns "Nothing"... so the byte-array seems to get lost while remoting.
but i don't know why - it is serialized ... what did i wrong???
thanks for help.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
