Visual Basic

Re: Using ActiveX in Visual Basic to connect to MATLAB

25-Aug-04 6:36

Try here.

http://www.mathworks.com/access/helpdesk/help/toolbox/combuilder/examples26.html

Anonymous25-Aug-04 6:42

Flash player in a C# application

25-Aug-04 6:42

One other note of Interest,
COM components from the Matlab for Excel version
will not work in VB.Net.

Member 130484924-Aug-04 22:17

Member 1304849

24-Aug-04 22:17

I have to play flash movies (.swf) files inside a C# application. The problem is I need an event to tell me when the playing of the file is complete, which the Shockwave Flash Control imported through ActiveX is not offering. Am I missing something on the Shockwave Flash Control or am I using the bad tool?

Any help in this matter will be much apreciated.

Re: Flash player in a C# application

Dave Kreskowiak25-Aug-04 3:38

Re: Flash player in a C# application

25-Aug-04 3:38

The Flash ActiveX control only fires three events, FSCommand, OnProgress, and OnReadyStateChange. The last one is probably the one your looking for. I think it will pass you a single int value:

0 - Loading
1 - Uninitialized
2 - Loaded
3 - Interactive
4 - Complete

If you get the Complete value, I THINK(!) the movie might be done playing.

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Dave Kreskowiak25-Aug-04 3:40

Printing in 136 column wide mode

25-Aug-04 3:40

By the way, This is teh VB Forum, not C#.

Cross posting in multiple forums is usually frowned upon.

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Member 132035224-Aug-04 21:29

Member 1320352

24-Aug-04 21:29

Can I print by using 136 column wide printing in Visual Basic.NET? I want to print to A4 but to specify a row-column (fixed character width) rather than pixel to specify x-y coordinate to print. In PrintDocument fonts are not in fixed width and normal printdocuments graphics does not do my job. I have to print to some speedy dot printers some does not have graphical methods.

What the peoblem is that I used the DrawString and measureString methods and a graphical printing. It works fine with new printers but majority of my customers has old dot-matrix printers. Especially in win98 it prints a big SPAGETTİ or NOTHING Frown | :(

I want to do a raw text printing. Printers has a wide mode printing option. I want to tell printer that this is a wide mode (wide mode is 136 columns while normal mode is 80 columns).

There is a famous article Microsoft Knowledge Base Article - 322090 HOW TO: Send Raw Data to a Printer by Using Visual Basic.NET. But the code inside does not work in win98.

I need immediate help. Thanks...

Dave Kreskowiak25-Aug-04 3:23

25-Aug-04 3:23

What is the problem that your having with the code? What are the errors? The code will work with Win98, but it may take a little modification to do so.

For instance, since Unicode support on anything other than an NT/2000/XP/2003 is questionable, you can have DLLImport hunt down the correct version of the imported functions without you having to guess at which version is available by making the following changes:

* Make sure that the EntryPoint names DON'T end in W or A.
* Change the CharSet option to CharSet.Auto.
* Change the ExactSpelling option to False.

You might want to start with this:

    <DllImport("winspool.Drv", EntryPoint:="OpenPrinter", _
       SetLastError:=True, CharSet:=CharSet.Auto, _
       ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _
    Public Shared Function OpenPrinter(ByVal src As String, ByRef hPrinter As IntPtr, ByVal pd As Long) As Boolean
    End Function
 
    <DllImport("winspool.Drv", EntryPoint:="ClosePrinter", _
       SetLastError:=True, CharSet:=CharSet.Auto, _
       ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _
    Public Shared Function ClosePrinter(ByVal hPrinter As IntPtr) As Boolean
    End Function
 
    <DllImport("winspool.Drv", EntryPoint:="StartDocPrinter", _
       SetLastError:=True, CharSet:=CharSet.Auto, _
       ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _
    Public Shared Function StartDocPrinter(ByVal hPrinter As IntPtr, _
       ByVal level As Int32, ByRef pDI As DOCINFOW) As Boolean
    End Function
 
    <DllImport("winspool.Drv", EntryPoint:="EndDocPrinter", _
       SetLastError:=True, CharSet:=CharSet.Auto, _
       ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _
    Public Shared Function EndDocPrinter(ByVal hPrinter As IntPtr) As Boolean
    End Function
 
    <DllImport("winspool.Drv", EntryPoint:="StartPagePrinter", _
       SetLastError:=True, CharSet:=CharSet.Auto, _
       ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _
    Public Shared Function StartPagePrinter(ByVal hPrinter As IntPtr) As Boolean
    End Function
 
    <DllImport("winspool.Drv", EntryPoint:="EndPagePrinter", _
       SetLastError:=True, CharSet:=CharSet.Auto, _
       ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _
    Public Shared Function EndPagePrinter(ByVal hPrinter As IntPtr) As Boolean
    End Function
 
    <DllImport("winspool.Drv", EntryPoint:="WritePrinter", _
       SetLastError:=True, CharSet:=CharSet.Auto, _
       ExactSpelling:=False, CallingConvention:=CallingConvention.StdCall)> _
    Public Shared Function WritePrinter(ByVal hPrinter As IntPtr, _
       ByVal pBytes As IntPtr, ByVal dwCount As Int32, ByRef dwWritten As Int32) As Boolean
    End Function

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Member 132035225-Aug-04 4:27

Member 1320352

25-Aug-04 4:27

I get no error. It just does not print. Do you have any knowledge about printers wide mode (136 columns)?

Dave Kreskowiak25-Aug-04 5:13

25-Aug-04 5:13

It's been a VERY long time since I played with a dot matrix printer, but yes I do know how the command set for them works.

Have you tried the modifications to the code that I posted?

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Member 132035228-Aug-04 2:12

Member 1320352

28-Aug-04 2:12

I had no time to try your modification because of other deadlines. I will try it out. Thanks a lot.

Anonymous25-Aug-04 7:43

Re: VB.NET or VB from VS6

25-Aug-04 7:43

You may not get a solution for Every Printer out there, I just tried that code(322090 HOW TO) on a win98se and a OKIData Microline 321 (with OKI Drivers) and it worked just fine.

Not all Dot Matrix printers follow the same Specifications and Standards.

VB.NET or VB from VS6

aslm24-Aug-04 12:27

aslm

24-Aug-04 12:27

Hi all, a rather basic question but...

Is it possible to create a VB.NET application that does not need the 20MB++ .NET framework installed when I distribute the program (need suport for 98, xp, nt and 2000)???

I have done some winodows programming before in VS6 and then you only needed the vbrundll files that are much smaller, I can accept to install them with my application but when the application is a small serial tool < 1MB in size I would rather not need to install 20MB++ of suport files. This might also scare the customers a bit with reboots and all.

If the answer is now, are there any other solution???
There are a lot of programs on the net and I have never seen any "small application" instalation files big enough to include the .NET framwork instalation, how do they solve the problem.

One option would be to use VB6 but Im about to start at a new company and need to get a new dev enviroment and I dont thik you can buy that anymore? It also feels a bit bad to start something new with buying old tools...

If the answer to all the questions is no, is the only solution to create a small standalone windows application to use VC++???

regards Me

Charlie Williams24-Aug-04 13:47

Charlie Williams

24-Aug-04 13:47

Code written in VB.NET does not compile to machine code. Instead, intermediate language (MSIL) code is produced, which then needs to be Just-In-Time compiled in order to run. No runtime = no run.

There is a app called Thinstall [^] that is supposedly is able to compile your app along with whatever parts of the .NET framework you use into an executable that can run with the framework installed on the target machine, but I've never used it or spoken with anyone who has.

Also, the 23MB install for the framework is a one-shot deal (assuming you stick with one version of it), so you won't need to reinstall it with every app you distribute.

Using .NET can pay big dividends when it comes to developer productivity, though, so it's not exactly apples to apples when comparing runtime size. There are certainly other factors involved.

Charlie

if(!curlies){ return; }

Re: VB.NET or VB from VS6

Dave Kreskowiak24-Aug-04 16:54

Convert TCP Class into thread

24-Aug-04 16:54

aslm wrote:
There are a lot of programs on the net and I have never seen any "small application" instalation files big enough to include the .NET framwork instalation, how do they solve the problem.

Most applications you pickup off the 'Net are not written in VB.NET. If you do, then most will not come with the .NET Framework installation. They'll assume you have the correct version of the .NET Framework installed already.

Besides, a 23MB file being downloaded off the 'Net is nothing nowadays.

Also, if you concerned with future developement, keep in mind that every new version of Windows will now come with the latest .NET Framework as part of the OS. Windows Server 2003 comes with .NET Framework 1.1 already installed.

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

jimmypearly24-Aug-04 11:30

jimmypearly

24-Aug-04 11:30

How do i convert the following into a fully multithreaded tcp server and remove the two addhandler(linerecieved,ondisconnected), i just know how
to remove the addhandler and make it into a separate thread.

any help would be appreciated.
thanks
jim

[UI form]
Option Strict On

Imports System.Threading
Imports System.Net.Sockets
Imports System.Net

Private myThread as thread
private mysocket as Tcplistener

Private Sub clsServer_load(...)
mythread = New threading.thread(addressof Dolisten)
mythread.start()
end sub
Pirvate dolisten()
dim localaddr = system.net.ipaddress
try
mysocket = new Tcplistener(localaddr,1234)
mysocket.start()
do
dim x as New clsClient(mysocket.AcceptTcpClient)
AddHandler x.Disconnected, AddressOf onDisconnected
AddHandler x.myReceived, AddressOf LineReceived
mcolClients.Add(x.ID, x)
Loop Until False
catch
end try
end sub

Public Sub LineReceived(ByVal sender As clsClient, ByVal strString As String)
'process recive data here

end sub

[clsClient.vb]

Option Strict On

Imports System.Net.Sockets
Imports System.Text

'client class to handle the new client connected to the server
Public Class clsClient
Public Event Disconnected(ByVal sender As clsClient)
Public Event LineReceived(ByVal sender As clsClient, ByVal Data As String)

Private mgID As Guid = Guid.NewGuid
Const BUFFER_SIZE As Integer = 512

Private mobjClient As TcpClient
Private marData(BUFFER_SIZE) As Byte
Private mobjText As New StringBuilder()

Public ReadOnly Property ID() As String
Get
Return mgID.ToString
End Get
End Property

Public Sub New(ByVal client As TcpClient)
mobjClient = client
mobjClient.GetStream.BeginRead(marData, 0, BUFFER_SIZE, AddressOf DoStreamReceive, Nothing)
End Sub

Private Sub DoStreamReceive(ByVal ar As IAsyncResult)

Dim intCount As Integer
Dim clientdata As String = Encoding.ASCII.GetString(marData)
Try
SyncLock mobjClient.GetStream
intCount = mobjClient.GetStream.EndRead(ar)
End SyncLock

If intCount < 1 Then
RaiseEvent Disconnected(Me)
Exit Sub
End If

RaiseEvent LineReceived(Me, clientdata)
SyncLock mobjClient.GetStream
mobjClient.GetStream.BeginRead(marData, 0, BUFFER_SIZE, AddressOf DoStreamReceive, Nothing)
End SyncLock

Catch ex As Exception
RaiseEvent Disconnected(Me)
End Try
End Sub

Public Sub Send(ByVal Data As String)
SyncLock mobjClient.GetStream
Dim w As New IO.StreamWriter(mobjClient.GetStream)
w.Write(Data)
w.Flush()
End SyncLock
End Sub

End Class

-just make it tough

Re: Convert TCP Class into thread

Anonymous25-Aug-04 19:34

Re: Convert TCP Class into thread

25-Aug-04 19:34

http://www.planet-source-code.com/vb/scripts/ShowCode.asp?txtCodeId=331&lngWId=10

Multi-Threaded TCP Chat Example

This is an example of how to implement the System.Sockets and System.Threading classes in VB.Net. It includes a multi-threaded server application as well as a client to demomstrate its use. This code is based off of a code example written in C# by Nick Ruisi on PSC, so give credit where credit is due. Enjoy!

jimmypearly25-Aug-04 21:17

jimmypearly

25-Aug-04 21:17

im not saying that its mine, that is why im needing your help, who knows that code also was taken from other authors too aside from the author who posted on PSC

so i would give credit to those who made the .NET Team, not just the author who posted it on PSC

do you think if i made that code i would still be asking you?

peace!
jim

-just make it tough

Re: Convert TCP Class into thread

Anonymous26-Aug-04 18:59

26-Aug-04 18:59

jimmypearly,

Hey jim, that quote was just pasted in from the page link I sent you, It's on that page as a description. I didn't write it.

I don't think it was intended to be offensive, especialy by me.

Sorry.

Macro app. - mouse click

dadak24-Aug-04 9:02

dadak

24-Aug-04 9:02

I need to write a macro app. This is why I need to know how can I immitate clicking somewhere in the window of other app. Thanks for answers.

Purple Monk25-Aug-04 6:52

Purple Monk

25-Aug-04 6:52

What do you mean?

dadak25-Aug-04 7:33

dadak

25-Aug-04 7:33

For example: There's an foreign app, in its form is a button or other control... I want to build an app, which allowes me to generate the click programmaticaly, without using a mouse.

Dave Kreskowiak25-Aug-04 8:04

25-Aug-04 8:04

You could generate the mouse click, but how are you going to guarantee that the window your "clicking" on is going to be in the exact same place every time it comes up?

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome