|
Dave Kreskowiak wrote:
you can't tell it where to render itself
...that is what I was afraid of.
I did a little digging and found the Kodak Image controls in the COM library. Have you had any experience with that?...good or bad??
Thanks
Brad
|
|
|
|
|
I haven't used them myself, but I've seen mixed reviews running around on the VB sites. Some people have success with them, some don't. But, in the cases where there wasn't any success, I have to question the abilities of the programmer, their image manipulation goals, and what they expect of out the Kodak components.
I haven't come acrossed any documentation for them either, but, then again, I wasn't looking for it...
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Thanks.
I'm searching for more info about them right now.
Brad
|
|
|
|
|
what if you want different table styles pointing to the same table. The app that I am working on is one that is used to correct tests. There is more than one type of error. Right now I have all the data being retrieved and thrown into the same table. I may have to change this is base the query on the correction mode and insert the data into different datatables, I really should do this, but I am still curious of the present problem.
I would like to create tablestyles, which I though that I did, so that in the different correction modes different columns are displayed, but I get an error when I try to do this:
<br />
An unhandled exception of type 'System.ArgumentException' occurred in system.windows.forms.dll<br />
<br />
Additional information: The data grid table styles collection already contains a table style with the same mapping name.<br />
Now they are the same mapping name, because the mapping name is the name of the table right?
Thanks for the help
|
|
|
|
|
hey kowplunk, sorry about the delay in my response, i was out of town for a few days. 
anyways, the cleaner way to handle it would be to have the different data loaded into different tables and have the appropriate tablestyle handle the appropriate table. however, i can't say for sure that this is the case as i have no idea what the table structure looks like, what the resulting data looks like etc.
i guess if you have the same data but you want to display it in different ways you could just load everything into the same table, then when you need to change the way the data is displayed, release the mapping name of the current tablestyle (via code) and then set the mapping name of the secondary one. as you found out you can't have two tablestyles pointing to the same table at the same time.
however, if you're intention is to show different columns etc. at different points, i think you might be better off with the multiple table solution.
-jim
|
|
|
|
|
Thanks for the help. Actually the error message was pretty descriptive. In the different styles that I had there was column mapping names that were the same and it doesn't like that, but it is easy to change. Everything is working awesome now. Thanks again.
|
|
|
|
|
I have to read a .xsd schema file by using visual basic code.Vb.net is not necessary.The code mst be in Visual basic.Give me idea.
|
|
|
|
|
Im developing a snap-in ( VB6 snap-in designer )
I want to develop a ResultView as 1 in the :
Administrative Tools -> Computer Management's
SystemTools->System Information->System Summary
I dont know how to display this kind of a view
plz help me out.
raheela
|
|
|
|
|
 Hi Friends,
I want to keep the width of the text on all the tab pages as constant.
The tab pages can have diferent text but all tabs should be properly alligned one below the other.I have 9 tabs so I want to arrange 3 tabs each in 3 rows
exactly alligned.
ALOK
|
|
|
|
|
I would like to get info from my DB that im dont with but now i want to get info that is between do specified dates for exampel: info between 2004-06-25 to 2004-07-15
In my DB i do log the dates.
This is my code i use now:
Private Sub DataGridUpdatePrint()
Dim dbconn, sql, dbcomm
Dim dbread As SqlDataReader
Try
SqlPrintConn.Open()
dbread = SqlPrintCom.ExecuteReader()
If dbread.HasRows() Then
OrderPrintRepeater.DataSource = dbread
OrderPrintRepeater.DataBind()
End If
Finally
dbread.Close()
SqlPrintConn.Close()
End Try
End Sub
Thanks to that person that can help me...
/ Timmie
|
|
|
|
|
You didn't post the most important part of your code. What does the SQL statement look like? This is where your going to put your WHERE clause with your date information.
SELECT fields FROM tableName WHERE datefield BETWEEN @date1 AND @date2
Your @date1 and @date2 should be parameters in your SQL command and have corresponding SqlParameter objects created and filled. In your case, something like this:
dbcomm.Parameters.Add("@date1", SqlDbType.DateTime).Value = firstdate
dbcomm.Parameters.Add("@date2", SqlDbType.DateTime).Value = seconddate
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Any body master in Datagrid please Help me...
Datagrid Problem
Hello can any body help
I have a grid which contains textboxes in it, Can any body help as how to add a new row of blank text boxes within the grid when a button is clicked
Thanks in Advance
Irsh
|
|
|
|
|
Hi..
I assume that your datagrid has a datasource / datamember one table from a dataset.
if you add a new row to your table then the grid will show the new row as empty textboxes
example
'we asume that you have already a dataset ( named dataset1 ) and in the dataset is a table ( named table1 ).
private sub addrow
Dim newrow As DataRow
newrow = DataSet1.Tables("table1").NewRow
DataSet1.Tables("table1").Rows.Add(newrow)
end sub
this sub adds a row to your table and this row must be shown in the binded datagrid as empty textboxes.
Hope i helped you.
Ramaseb.
|
|
|
|
|
Any body master in Datagrid please Help me...
Datagrid Problem
Hello can any body help
I have a grid which contains textboxes in it, Can any body help as how to add a new row of
blank text boxes within the grid when a button is clicked
Thanks in Advance
Irsh
|
|
|
|
|
I have .msg file( outlook email) and successfully loaded the msg file into
the outlook in the notes folder. However, I can't launch the loaded email.
Here is how I did in order to launch the outlook note.
Dim objNameSpace As Outlook.NameSpace
Dim objMAPIFolder As Outlook.MAPIFolder
Dim objMailItem As Outlook.MailItem
Set objMAPIFolder = objNameSpace.GetDefaultFolder(olFolderNotes)
Set objNoteItem = otlkDoc.CreateItemFromTemplate(str_FileName)
objNoteItem.Move objMAPIFolder
objNoteItem.Save
objNoteItem.Display 1
|
|
|
|
|
hii every one,
i need to convert from the doc file to html..not by using save as in the ms word.. coz it makes problems with the arabic laguage...it will be helpful if i know the structure of the doc file...
any one can help ??
|
|
|
|
|
|
You'll have a difficult time with this one. Your talking about writing an app that can load a .DOC file, the file structure of which is not simple nor easy to interpret, rendering it in a form that you can then go over and convert to HTML and images. This will be FAR from easy and I don't think there is alot of experience out there to help you. You might want to check out the Open Source sites, like SourceForge, and search for a Word document viewer to get you started. I don't know of any projects myself, but that doen't mean they don't exist.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hi all,
I have a data sheet from rtf file that I read into the excel table so that it looks need. I also have a limit as to the range of these values. Eg. 3 to 7. So if the value in the cell is 9, it is out of range and I am suppose to highlight it in red colour. Any help on this ? I am using Visual Basic, not VBA.
On another question, is there any good Visual Basic example of how to draw a chart without having the program crash during the second time? Thanks in advance.
|
|
|
|
|
I want to return a value from textbox to other form when it opens, how to code the return?
my code:
In FORM1:
file_location = textbox1.text
Private Sub btnView_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnView.Click
Dim view As New frmView
MessageBox.Show(file_location)
If view.ShowDialog() = DialogResult.OK Then
End If
End Sub
Public Property ReturnView() As String
Get
Return file_location
End Get
Set(ByVal Value As String)
file_location = Value
End Set
End Property
In FORM2:
Dim AddJob As New frmAddJob
view = AddJob.ReturnView
TextBox1.Text = view
The problem is the view is nothing..it can't pass the value to form2..
does everybody know what's wrong with code? Thanks for your help..
-----------------------Lisa--------------------------
|
|
|
|
|
If I'm reading this correctly you want to click on a button on form1 which contains a textbox and pass the contents of the textbox to Form2.
Simply set up a module with a variable mvarfile_Location as string. When you click on the button. Set this public/friend module level variable and show form2. In the form2 load event - retrieve the contents of this module level variable mvarfile_Location .
FORM1
*****
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Frm2 As New Form2
mvarFileLocation = TextBox1.Text
MessageBox.Show(mvarFileLocation )
If view.ShowDialog() = DialogResult.OK Then
End If
End Sub
FORM2
*****
Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
me.text = mvarFileLocation
End Sub
End Class
Module test
Public mvarFileLocation As String
End Module
Of course you could use a class and properties etc. But basically you are putting the contents into a variable/property etc. accessible from both forms.
Alternatively
You could pass a reference to form2 from form1 and use this to directly access form1.
|
|
|
|
|
Thank you very much! It works perfect!
Lisa
|
|
|
|
|
Hi all..
can i work on a unified screen resolution in order for the views to appear the same. Is there a way to make the views and fonts dynamically adjustable according to the screen resolution in vb.net?
Thanks alot
|
|
|
|
|
I am trying to iterate through a hashtable using an enumerator. I want to change some values as I go.
Here is a simplified version of my code….
ptr = hashTab.GetEnumerator<br />
<br />
While ptr.MoveNext<br />
hashTab.Item(ptr.Key) = "something different"<br />
End While
I get the following exception when I change a value – Collection was modified; enumeration operation may not execute.
What is the correct way to perform this type of operation?
John.
|
|
|
|
|
The problem occurs because you are completely replacing the item in the hashtable. This is not allowed during an enumeration.
If your hashtable contains objects, it is allowed to update properties of those objects. So one solution is to create an object (or type) that contains the string value.
Another solution is to build a new collection, and then discard the old one.
my blog
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
