Visual Basic

5-Jun-04 14:58

Hey,

Does anyone know if or how to go about generating a barcode to print out to be scanned by a scanner for tracking purpases. I want to be able to print a barcode onto an order information sheet, but can't seem to figure out how to go about it. If someone could help me on this I'd really appreciate it. Confused | :confused:

Thanks

Re: Barcodes

Dave Kreskowiak6-Jun-04 9:17

6-Jun-04 9:17

First, you have to know what format of barcode you want to print out. No, they are not all of the same. Are you looking at '2of5', '3of9', 'Code128', ...

There are articles here on CodeProject, all you have to do is search the articles for 'barcode'.

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Runtime Error 481

Boggahutt875-Jun-04 14:40

Boggahutt87

5-Jun-04 14:40

Ok I'm Still tweaking my game, Fixing up this and that, adding Beeps here and there, Also im trying to add a Transparency with Paintpicture command. What happens is it gives me the ridiculous error of "invalid picture." How is a Picture invalid? I tryed the same code in a blank project and it works. but when there is tiles, it does not work at all. Can someone explain to me what Error 481 is and how i could get around this?

Thanks Alot

Boggahutt87

Re: Runtime Error 481

Dave Kreskowiak6-Jun-04 9:14

6-Jun-04 9:14

There isn't much we can do unless you supply the code that is failing. What type of picture are you trying to paint (.GIF, .JPG, .BMP)? What the controls are that are involved, like PictureBox, ImageList, ... The ridiculous little error CAN occur because there are controls and methods that don't support transparency...

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

text to speech in .net

Member 8573775-Jun-04 5:52

Member 857377

5-Jun-04 5:52

I have a direct speech control named tts.
I can get the voices and select one of them
but I cannot here the voice. All the time the default one
¿any help for Visual basic .net?

For ing As Integer = 1 To tts.CountEngines
Combo1.Items.Add(tts.ModeName(ing))
Next
' I select Adult Female #1, American English (TruVoice)
Combo1.SelectedIndex = 8
Combo1.Text = Combo1.SelectedItem
' what else to get the voice speaking the following?
tts.Speak("hello")

Dave Kreskowiak5-Jun-04 10:53

5-Jun-04 10:53

Where did this TTS control come from? Was it from the Speech .NET Beta SDK's? Was it the Speech Application SDK? What version are you using? What version of the .NET Framework are you using?

Without knowing this, it's impossible to tell you what's going wrong...

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Member 8573776-Jun-04 3:53

Member 857377

6-Jun-04 3:53

I have the Speech SDK 5.1 and I suppose this control comes with this because when I download it over the form, the name is:
in the forms controls:TextToSpeech Class
and when dropped over the form, the name is
AxTexToSpeech1 AxHTTSLib.AxTextToSpeech

Thanks

Dave Kreskowiak6-Jun-04 9:41

6-Jun-04 9:41

That thing is 3 years old! Speech SDK 5.1 was replaced by the Speech Application SDK and soon to be released Speech.NET.

I don't have any idea what the problem could be. As far as I can remember, and find, the 5.1 SDK came with 2 voices, 1 Male and 1 Female.

From the object names that you've given, your using the ActiveX control version of the TTS engine. You might want to go back to the samples and try the methods spelled out in there so you don't have to use the ActiveX version.

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Member 8573776-Jun-04 10:10

Member 857377

6-Jun-04 10:10

Thanks.I was my first approach to TTS so I went into microsoft web and download what I thought was up to date. I will wait for Speech.Net to start my approach to TTS.
Thanks a lot.

emari9-Jun-04 20:17

emari

9-Jun-04 20:17

(as marisolera)
I found the answer.As I have only the visual basic .net for students and not the full visual studio, I cannot implement other speech programs than Speech SDK 5.1. This program comes with 4 voices (Mike,Sam,Mary and a predefined one).
I will use all this four and that's o.k. for the moment, even when my project needs between 20 and 30.

lvm_insertitem

klaus_745-Jun-04 2:34

klaus_74

5-Jun-04 2:34

how can i use API functions and LVM_INSERTITEM to insert items into a listview?

Dave Kreskowiak5-Jun-04 6:07

5-Jun-04 6:07

You would have to use the SendMesage function. You would need the target Listview's window handle (hWnd) and a pointer to a completed LVITEM structure.

But, why would you want to go through that hell when there is a perfectly good Items.Add function?

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

klaus_745-Jun-04 21:03

klaus_74

5-Jun-04 21:03

ok...

Public Declare Auto Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hwnd As IntPtr, ByVal wMsg As Long, ByVal wParam As Long, ByRef lParam As LVITEM) As Long

Public Structure LVITEM
Dim mask As Long
Dim iItem As Long
Dim iSubItem As Long
Dim State As Long
Dim stateMask As Long
Dim pszText As String
Dim cchTextMax As Long
Dim iImage As Long
Dim lParam As Long
Dim iIndent As Long
Dim iGroupId As Long
Dim cColumns As Long
Dim puColumns As Long
End Structure

Public Const LVIF_TEXT = &H1
Public Const LVIF_IMAGE = &H2
Public Const LVIF_PARAM = &H4
Public Const LVIF_STATE = &H8
Public Const LVIF_INDENT = &H10
Public Const LVIF_GROUPID = &H100
Public Const LVIF_COLUMNS = &H200

Public Const LVM_FIRST = &H1000&

Public Const LVM_INSERTITEMA = (LVM_FIRST + 7)
Public Const LVM_INSERTITEM = LVM_INSERTITEMA

Public Const LVM_GETITEMCOUNT = (LVM_FIRST + 4)

Private Sub fAddItem(ByVal sText As String, Optional ByVal lIndex As Long = 1, Optional ByVal iIcon As Long = -1, Optional ByVal iIndent As Long = 0, Optional ByVal lItemData As Long = 0)
Dim tLV As LVITEM
Dim lR As Long

tLV.pszText = sText & vbNullChar
tLV.cchTextMax = Len(sText) + 1
tLV.iImage = iIcon
tLV.iIndent = iIndent
tLV.lParam = lItemData
tLV.iItem = lIndex - 1
tLV.mask = LVIF_TEXT Or LVIF_IMAGE Or LVIF_PARAM Or LVIF_INDENT

lR = SendMessage(Me.ListView1.Handle, LVM_INSERTITEM, 0&, tLV)
End Sub

Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Call fAddItem("test")
End Sub

what is wrong?

Dave Kreskowiak6-Jun-04 9:06

6-Jun-04 9:06

For one, your using VB.NET and passing Long's for your parameters. Use Integers instead. VB6 passed Long's because they are 32-bit integer's. In VB.NET, they are 64-bit. Next, declare your structure with a Sequential Layout. This will make sure that all of your structure members appear in memory in the order that you specified them. Lastly, don't do this on a Form_Load event. It is not guaranteed that your ListView will even have a handle until after Form_Load is complete. Test it in a button click event.

Public Declare Auto Function SendMessage Lib "user32" Alias "SendMessageA" ( _
                    ByVal hwnd As IntPtr, ByVal wMsg As Integer, _
                    ByVal wParam As Integer, ByRef lParam As LVITEM) As Integer
 
<StructLayout(LayoutKind.Sequential, CharSet := CharSet.Ansi)> _
Public Structure LVITEM
    Public mask As Integer
    Public iItem As Integer
    Public iSubItem As Integer
    Public State As Integer
    Public stateMask As Integer
    Public pszText As String
    Public cchTextMax As Integer
    Public iImage As Integer
    Public lParam As Integer
    Public iIndent As Integer
    Public iGroupId As Integer
    Public cColumns As Integer
    Public puColumns As Integer
End Structure
 
Public Const LVIF_TEXT = &H1
Public Const LVIF_IMAGE = &H2
Public Const LVIF_PARAM = &H4
Public Const LVIF_STATE = &H8
Public Const LVIF_INDENT = &H10
Public Const LVIF_GROUPID = &H100
Public Const LVIF_COLUMNS = &H200
 
Public Const LVM_FIRST = &H1000&
 
Public Const LVM_INSERTITEMA = (LVM_FIRST + 7)
Public Const LVM_INSERTITEM = LVM_INSERTITEMA
 
Public Const LVM_GETITEMCOUNT = (LVM_FIRST + 4)
 
Private Sub fAddItem(ByVal sText As String, Optional ByVal lIndex As Integer = 1, _
            Optional ByVal iIcon As Integer = -1, Optional ByVal iIndent As Integer = 0, _
            Optional ByVal lItemData As Integer = 0)
    Dim tLV As LVITEM
    Dim lR As Integer
 
    tLV.pszText = sText & vbNullChar
    tLV.cchTextMax = Len(sText) + 1
    tLV.iImage = iIcon
    tLV.iIndent = iIndent
    tLV.lParam = lItemData
    tLV.iItem = lIndex - 1
    tLV.mask = LVIF_TEXT Or LVIF_IMAGE Or LVIF_PARAM Or LVIF_INDENT
 
    lR = SendMessage(Me.ListView1.Handle, LVM_INSERTITEM, 0&, tLV)
End Sub
 
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) _
    Handles Button1.Click
    fAddItem("test")
End Sub

Also, I have NOT tested this code. I've just corrected the obvious mistakes and reposted the code. I haven't run it through the compiler or tried to run it!

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Access information from a query in a Access

klaus_746-Jun-04 20:40

klaus_74

6-Jun-04 20:40

it's ok... thank you

Dialog in a web page

?!?5-Jun-04 2:24

?!?

5-Jun-04 2:24

Hi My question is:
can i make a dialog (form) with tabs using Vb and use this dialog in a web page, or should it be developed using asp or asp.net?
if it possible than how can i do it!
Confused | :confused:

Re: Dialog in a web page

RichardGrimmer7-Jun-04 5:29

RichardGrimmer

7-Jun-04 5:29

You could create the whole thing as a big ActiveX control, and then embed that in the page....

"Now I guess I'll sit back and watch people misinterpret what I just said......"
Christian Graus At The Soapbox

ccotton3334-Jun-04 5:31

Access information from a query in a Access

4-Jun-04 5:31

I have an access table that has a query to make a fullname from one column-(Lastname) and another column-(Firstname). The query puts the Lastname and firstname like this:

Lastname, Firstname

The problem is that when I go to setup the adapter in VB .NET the table doesn't show this column in the list, so I'm at a loss on what to try next. Everytime I try different things with no success. If someone can help me I'd appreciate it. Confused | :confused:

ccotton3334-Jun-04 5:30

Re: Access information from a query in a Access

4-Jun-04 5:30

Mike Ellison4-Jun-04 7:09

Mike Ellison

4-Jun-04 7:09

Hi there. If you are basing your SelectCommand sql statement in your DataAdapter on the table, it wouldn't include any query-based computed fields. Can you base your SelectCommand statement on the query instead? I think you would simply use the query name in place of the table name.

Re: Access information from a query in a Access

ccotton3334-Jun-04 7:27

Re: Access information from a query in a Access

4-Jun-04 7:27

Thanks,

About five minutes after I sent posted that message, I tried that and it has worked so far. I'm going to continue testing it though. Thanks for your help.;)

Dave Kreskowiak7-Jun-04 6:22