|
I have replaced most of the for loops with Array.Copy to mimic the functions of the dll call. But this did not have the speed increase that i was looking for. still same processor time at 100 for 3 seconds. I have also tried a few things like encrypting a 1.4 meg file with the 6.0 version of the blowfish program and it takes seconds. I try with the .Net conversion and it take around 10 minutes to do the same thing. Throughout the conversion of this 6.0 project i have had to make many sub procedures to mimic the function of this dll. I believe the extensive use of this procedures are what is slowing me down.
The function is pretty cool if i work in .net. I need an outside call to do some of the work for me because my app is straining a little to hard. I need something that does the same thing that the rtlMoveMemory does when you send it something like this
<br />
Public Declare Sub CopyMem Lib "kernel32" Alias "RtlMoveMemory" (Destination As Any, Source As Any, ByVal Length As Long)<br />
<br />
Dim LongValue as Long = 1415936116<br />
Dim BB() as Byte<br />
CopyMemory( BB(0), LongValue , 4)<br />
and what this does is turn this number into binary
looks like this BB(0) = 116 : BB(1) = 120 : BB(2) = 101 : BB(3) = 84 in the byte array. I also need a function that does this process in reverse. I had to mimic this with extensive for loops to check each bit. If i could find an outside call to do this same thing. I also found out if the value is greater than 2147483648 which is 2 ^ 31 and is also the highest value bit in a 32 bit number. the function causes the value to go negative and subtract any other amount that the bits equal preceding that last bit.
If there is any outside funtion can be used that would speed up my code. I really need to know because with the .net conversion that i am using now. If i didnt have a 6000 RPM Fan i would cook my P4 2.8 GHZ Processor. Oh yes a article on application throttling would be great too if anyone knows where i could read one.
|
|
|
|
|
Your not going to find an equivelnet function in the .NET Framework. This is because the execution environment is MANAGED. This means that any object can be picked up and moved AT ANY TIME without you knowing it. You could write managed code to get around this, but it would also take time to execute this extra code, again slowing your app down tremendously because you have to call the Marshaler to pin the object in place, do your memory copy, then unpin the object. Pinning is a notoriously slow process, just like calling into unmanaged code, because of the overhead of converting the object from managed to unmanaged and back.
As a side to your 2^31 bit problem. Use UInt32 data types instead of Int32's or Integers (same as Int32). UInt32 is an unsigned 32 bit integer, where Int32, or Integer, is a signed 32 bit integer. The 1 bit being used for the sign...
Sometimes converting code instruction-by-instruction is not the most efficient method. Sometimes you have to rewrite an entire function from scratch to accomplish the same thing...
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
hello
i currently got this error
\Form1.vb(34): Type 'AxMSWinsockLib.AxWinsock' is not defined.
The referenced component 'AxMSWinsockLib' could not be found. Could not load the type library. Library not registered.
what seem to be the problem?
i got the program from the my friend who say he have no problem running at his computer
i urgently need help cause this will effect my whole program/assigment
thank you in advance
Gary
|
|
|
|
|
You don't have the MSWinsock .DLL on your computer and regsitered. It's on his machine because he developed the application with the reference to it. He needs to supply you with the .DLL file, most likely winsock.dll, he used and any other .DLL files in the bin directory he got the finshed .EXE from. You then need to copy that .DLL into your C:\WINNT\System32 or C:\WINDOWS\System32 folder (WinNT or better), register the .DLL using REGSVR32 and the remaining .DLL's into the folder with your .EXE. Then your app should work.
Better yet! Tell him to make an Installer Project and add it his solution so you can install the application and any needed files.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
is there any way that i can do it without his help?
cause temporary now he is not around for me to contact him
can i download or install this .dll file from anywhere?
Gary
|
|
|
|
|
Another Windows machine... The problem you're going to run into is that you MUST get the version that was used to build the application. It's kind of odd that you don't have this .DLL. The other part of the problem is that you probably don't have the Interop .DLL that was generated when the application was built. Without that, you could get the correct WinSock.DLL, but still be unable to use it.
You might also have to have WSock32.DLL...
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
let me get this right
each program i build have a specific .dll file
this means that if i wish to move the program to test on other windows/computer, i must copy the .dll file together?
which folder should i get the .dll file from?
shouldn't VB.Net able to run all application?
below is the coding that provide me with the error
Friend WithEvents w1 As AxMSWinsockLib.AxWinsock(
Me.w1 = New AxMSWinsockLib.AxWinsock()
AxMSWinsockLib.DMSWinsockControlEvents_ConnectionRequestEvent
AxMSWinsockLib.DMSWinsockControlEvents_DataArrivalEvent
The referenced component 'AxMSWinsockLib' could not be found. Could not load the type library. Library not registered.
The referenced component 'MSWinsockLib' could not be found. Could not load the type library. Library not registered.
could this be the problem that i did not register after installation
or during installation some of this file is not installed?
or is it that i need to make some adjustment
sorry to trouble you so much Dave but i really need this help
thank you
Gary
|
|
|
|
|
WHen the application was built, in the bin directory where the final .EXE file is found, you will find .DLL file(s) that start with Interop.whatever.dll. These files MUST be distributed with the application .EXE file. If you don't have these files AND the .OCX file that they reference, you will get the error that your describing.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
hello Dave
i manage to get the wsock32.dll file which is not available in my computer
anyway since you have mention that those two other .dll file is only available upon application development
so is there any other way to recreate those two .dll file on my own?
cause i manage to call up my friend cellphone and he told me that the program he give me is the only copy after he formated his computer
then i search a few other computer that are available at my college but i have no luck in finding the .dll file
so is it possible for me to recreate them?
cause those two line is the example i need to complete my assignment
so if i cant try the code i wont know how im going to apply it
thank you for all your help and sorry to trouble you so much
|
|
|
|
|
You would have to recreate the IDENTICAL references he made in his app. You could use TLBIMP on the .OCX and .DLL files that he used to recreate the missing Interop.*.DLL's. But you have to get that list from him.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
today something odd have happen
i try my application on 1 of my college computer and the missing winsock file pop-up
i double check on my cd which the original program was and there is no winsock file in the bin
but after i compile at that particular computer, it show up
so Dave can i know why this happen and what file can i copy that can cause the 2 file to auto generate?
my lecturer say may be is my windows problem or when i install the program some file is missing
im getting blur on this
i think this might the last time i'll disturb you on this matter
thank you
Gary
|
|
|
|
|
It appeared in the bin folder because the compiler copied it there. The file is needed by your application because of the reference your created. If the 2 Interop.*.dll files are not there, it's because they are not needed...
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
The file with the little yellow "!" next to it is the one that is missing. Without that file, you can't compiler the project. That's why it will only compile on one machine. That one machine has the file it needs to compile this thing. Go back to that machine and search for the file that the other machines put that "!" next to. Copy that file to the other machine, in the same folder that you found it in, then you should be able to compile the project.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
hello dave
did you receive my mail?
if not this is what im trying to tell you
1. i try copying a lot of folder and files but none of it work
2. thinking of changing the codings to a much simplier that wont cause any error as before
3. asking you for advise and suggestion on how to recode so it is similiar to those using winsock or should i just use the tutorial in MSDN website
4. if possible tell me which folder to copy
5. telling you that i am very thankful that you are willingly to help me
thats all thank you
Gary
|
|
|
|
|
What mail?
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
some sort like a thank you mail
but anyway
thanks for all your help
Gary
|
|
|
|
|
I'm building an application to read and write formatted files on disk. I have associated the file
extension (.fod) with the application and this works fine. When I double-click on a file in, say
Windows Explorer, the application starts as it should. But I now need a way of finding the name
of the clicked file within the application so I can open it. How do I do it?
I've been searching the help systems and just not been able to find it, probably because I'm using
the wrong terms. I've tried 'parameter', 'external parameter', "%1" and a whole host of others.
Many thanks in advance for your help.
Alan Hallett
|
|
|
|
|
The parameter specifier is "%1". Keep the quotes around the %1 though. This will prevent file paths with spaces in them from being broken into multiple parameters.
In your app, check into the Environment class and its CommandLine Property and GetCommandLineArgs method.
Docs at MSDN[^]
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Dave - many many thanks. I've been looking for this solution for what seems like days - good on ya!
|
|
|
|
|
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hii every one
i want to ask about the Mschart dataSource, i need to make a chart to view some data from the database...i try to make a normal dataset and connects it to the chart control but i fail
so have u got any idea ????
|
|
|
|
|
Hi
I know it's a small thing, but it really bugs me...
When i re-open a vb code file, all subs/functions are expanded.
I find that it is hell for the overview.
How can i make them stay closed until i open them ?
THomas
|
|
|
|
|
I am using DDE for inter-process communication in between 2 processes say VBProc and VCProc. VCProc is a UNICODE and maintains all strings in UNICODE format only (it might be in any language e.g. English, Chinese etc...) My VBProc module requests for these strings/data over DDE and display those as static text.
If VCProc has a ANSI string then the mechanism works fine, but the moment string is in UNICODE I face problem at VBProc end. With further debugging I found that VBProc requests data with CF_TEXT format whereas it should do it wit CF_UNICODETEXT format.
One solution for this problem could be to use MS Forms 2.0 object library. But it doesn't seem to reliable as far as DDE for UNICODE data exchange is concerned (from experience of one of my friend and from one post in the same context on Microsoft's site). So I am not in favor of using this solution. Could anyone comment on using it? Is it a freely distributable?
Has anybody tried/used/worked on similar scenario? Does anybody have an alternate solution to this problem?
Any suggestion in this context is appreciated
Thanx in advance
-Sushil
|
|
|
|
|
How to handle interupts in VB Scripting.
Details about interupts - If my VB script is running and then based upon certain even or alarm I need to interupt the VB scripting execution and take the programm flow control and perform certain predefined tasks based upon the interupt.
sushama
sushama
|
|
|
|
|
What kind of event are you talking about? If you can subscribe to it using WMI, then your in luck...
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
