|
Have a nice try with Why! Why! Why!
Best Regards,
Ahmad Rifai Yusuf
|
|
|
|
|
Hey,
I'm a graphics newbie. I built an app with a single form, and a set of controls in it. Now I want to be able to use GDI calls like drawline to draw visual links between these controls. When I use the Paint event of the form, I get a line that goes under my controls, not over it.  Is there a way to get the graphics to lie on top of the controls? Additionally, what's the easiest way to make those graphics go away when they are no longer needed?
Thanks!
Mike Hammond
Apprentice VB Guy
|
|
|
|
|
I've never done what your talking about, but there are two possibilities...
1) Override the OnPaint eventof your form. The first thing you'll do is call MyBase.OnPaint(e) with the PaintEventArgs you were given in the function header. Then when that call completes, you can use the hWnd handle in the PaintEventArgs to paint everything else you need to, like your lines that go on top of controls.
2) You might have to look into overriding WndProc. What I think your going to have to do is when you get a WM_PAINT message, you'll call MyBase.WndProc(msg) to have the underlying code paint everything for you, then you'll start your painting code to draw your lines as in 1.
I hope that's clear enough... 
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hi all.
Here is my problem, I want to create my own installation program, by adding embedded resources.
But I don't know how extract their from the .exe
Is anyone can help me ?
|
|
|
|
|
If your talking about VB.NET and writing a setup for a .NET application, check into the ResourceManager class. MSDN Docs and example[^].
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Just go to the Visual Studio icon .
select Microsoft Visual Studion Tools.
from there Select Package and Deployment Wizard and do the process as it said and you will be able to create Your own Wizard.
Hope that it might solve the problem
|
|
|
|
|
Dave Kreskowiak --> Yes, but how to do the same thig with my .exe file and .dll files ?
ramesh Gupta --> I know this solution but I don't want to use that, or a similiar solution. I want to create my own deployment program.
|
|
|
|
|
You want to pull resources out of existing .exe's and dll's? Or do you want to pull files out of your Setup.exe that you create, something like a self-extracting Setup or ZIP file?
Well, since .NET .EXE's and .DLL's have a different resource storage format than Win32 .EXE's and .DLL's, you'll have to be able to differentiate between the two.
You might want to read a little on Resources here[^].
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
No, I have my .NET .exe, with the embedded .exe,.dll..., added in visual studio by "Add --> Add a new element".
And when I launch my .exe which contains embedded files, I want to copy the files on a specified folder.
|
|
|
|
|
In that case, look into the ResourceManager class. There is the documentation on MSDN for the ResourceManager class and there are a few articles here on CodeProject that describe how to create and retrieve resources. The articles are written in C#, but are easily converted to VB.
CodeProject ResourceManager Articles[^]
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I have found this :
private static void CheckDLL(string dllfilename)
{
if (!(System.IO.File.Exists(dllfilename)))
{
System.IO.Stream s = Assembly.GetExecutingAssembly).GetManifestResourceStream("nBASS." + dllfilename);
System.IO.Stream r = System.IO.File.Create(dllfilename);
int len = 8192;
byte[] buffer = new byte[len];
while (len > 0)
{
len = s.Read(buffer, 0, len);
r.Write(buffer, 0, len);
}
r.Close();
s.Close();
}
}
And I have adapted it for my program, and convert it into vb.net :
Function CheckDLL(ByVal dllfilename As String)
Dim s As System.IO.Stream = System.Reflection.Assembly.GetExecutingAssembly().GetManifestResourceStream(("WindowsApplication1." + dllfilename))
Dim r As System.IO.Stream = System.IO.File.Create(dllfilename)
Dim len As Integer = 8192
Dim buffer(len) As Byte
While (len > 0)
len = s.Read(buffer, 0, len)
r.Write(buffer, 0, len)
End While
r.Close()
s.Close()
End Function
Thanks a lot it works !! 
|
|
|
|
|
Hi,
I'm developing a program that requires a method which set the public key of a RSACryptServiceProvider.
I've found a problem: if I convert the Bytes' Array of the module or of the exponent to a String with the ASCII conversion and later I take the output's String and convert to a Bytes' Array, I'd like to have the original Bytes' Array but it isn't what I have  . I receive another one.
Anybody could help me?
Sorry for my bad language but I'm Italian...
Thanks Klaus
|
|
|
|
|
Yeah, you really can't do that. But there is a method that works using Base64. Check out the System.Convert class. You'll find a couple of methods very useful for what your doing. Convert.ToBase64String will convert an array of 8-bit unsigned integers (or Byte) to a Base64 string. You can then use Convert.FromBase64String on the resulting string to get back your original array of Byte's.
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
does anyone have or know of some basic bookkeeping source code that i could use to make a personal program on visual studio.net
|
|
|
|
|
I suggest you to take a look at http://msdn.microsoft.com/archive/default.asp and search the key word of your program. I've often found code that helped me to create my application.
Sorry for my bad english
Bye Klaus
|
|
|
|
|
For source code, I don't know of any, but you might want to try using Googling for "bookkeeping source code". You might find something that you can use.
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
How do you expose your Application's Object Model?
|
|
|
|
|
Code it up as a collection of COM Objects. Each one exposes some functionality, and they work together to make the App work. the objects themselves can then be accessed individually.
"Now I guess I'll sit back and watch people misinterpret what I just said......"
Christian Graus At The Soapbox
|
|
|
|
|
I found a small problem in using Visual Basic 6.0 to show a background image in treeview, could someone help me?
|
|
|
|
|
The TreeView control doesn't support a background image. You'd have to write your own TreeView control, from scratch, to get this functionality. You might want to checkout Infragistics[^] controls for a replacement.
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hi,
I have a problem with tree view. I want to display tree view from
right to left instead of left to right but The rtl property doesn't work
correctly. Can you help me to overcome the problem?
|
|
|
|
|
You never mentioned what the actual problem is. All you said was, "it's broken"... What's the actual problem and what do you want it to do?
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
The actual problem is that persian language is written from right to left.
So I want to have a tree to be expanded from right of the screen to the
left but I dont know how to do it. I have the same problem with toolbar component.
|
|
|
|
|
Well, after a bit of digging, I've figured out that the TreeView control doesn't support drawing the tree right to left, but does support right to left text alignment. Same with the Toolbar. It looks like a large bunch of the controls don't support drawing right to left, other than text alignment.
You can implement what's called 'Mirroring' in code to get the TreeView to showup drawn right to left. There is an example of it here[^] on CodeProject, but the process is not documented in the article. You'll have to look at the code to figure it out. But, that article lists a BUNCH of controls and their right to left support.
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I found a small problem in using vs.net to create a application,could someone help me? Thanks!
Last time when I create a toolbar in my application---I just use the normally way to create it. It seems work well,but when I enable the Windows XP visual style,it won't work: I found no icons in the toolbar! I just use the only one word: System.Windows.Application.EnableVisualStyle.
I try this in another language:C++ or c#,the same problem occur!
Could someone help me?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
