|
packetlos wrote:
i think i have bitten off a bit more than I can chew
I think you're right, but I don't know any better way to learn and grow than to take on and accomplish a task that is beyond one's current capabilities.
As for data types, there really isn't anything in C++ that I know of that handles 6-bit fields efficiently, but I rather like 32-bit words, manipulated with logical bitwise operators for what are essentially flag fields. This approach lets you define in advance several constants that you can simply OR into the word, and allows you to isolate parts of interest with an AND. I'd make the whole Offset:Reserved:Flags:Window section a single word, That should also eliminate any need for worrying about memory alignment in your struct.
Some people think of it as a six-pack; I consider it more of a support group.
|
|
|
|
|
Could I not do something like this:
typedef struct len_flags
{ USHORT unused : 6,
len: 4,
flags : 6;
} len_flags;
typedef struct tcp_header {
USHORT sport;
USHORT dport;
UINT32 seq;
UINT32 ack;
#define TH_FIN 0x01
#define TH_SYN 0x02
#define TH_RST 0x04
#define TH_PUSH 0x08
#define TH_ACK 0x10
#define TH_URG 0x20
len_flags lenflags;
USHORT win;
USHORT crc;
USHORT urp;
} tcp_header;
Then test the flags like this:
if (tcpHeader->lenflags.flags & TH_URG)
tempTCP.flags = "URG ";
if (tcpHeader->lenflags.flags & TH_ACK)
tempTCP.flags += "ACK ";
if (tcpHeader->lenflags.flags & TH_PUSH)
tempTCP.flags += "PSH ";
if (tcpHeader->lenflags.flags & TH_RST)
tempTCP.flags += "RST ";
if (tcpHeader->lenflags.flags & TH_SYN)
tempTCP.flags += "SYN ";
if (tcpHeader->lenflags.flags & TH_FIN)
tempTCP.flags += "FIN ";
But it dosent seem to work  , something to do with #pragma pack?
Regards
Packetlos
|
|
|
|
|
Hi
I know this is a C++ forum but i think this is a very common question.
I am creating a client server application in VB.net. client is calling a method in the server using a proxy class. I am throwing an exception on the server side. Now i want the client to capture that particular exception. How can i do that. I could able to achive this when i run both client and server on the same machine but when i run the client on the different machine I am getting an exception server generated and exception check the server's config. file. How can i catch the particular exception generated by server.
thank you
|
|
|
|
|
how can i make a SDI application into full screen, in a way that application occupies entire screen(no taskbar )and no Minimizing/moving for the window..
The returned pointer may be temporary and should not be stored for later use.
|
|
|
|
|
Consider making it a dialog based app and removing the dialog's caption bar at design time. Then, in the dialog's OnInitDialog() handler call SetWindowPos() to maximize the window and keep it on top of all other windows.
PS: This won't cover the taskbar.
/ravi
My new year's resolution: 2048 x 1536
Home | Articles | Freeware | Music
ravib@ravib.com
|
|
|
|
|
Hey Ravi, Thats not a dialog based app..
that s a SDI app.
The returned pointer may be temporary and should not be stored for later use.
|
|
|
|
|
you can do the similar thing for the sdi application too.. in the onCreate event remove the caption style before the frame is created.
MSN Messenger.
prakashnadar@msn.com
"If history isn't good, just burn it." - Sidhuism.
|
|
|
|
|
ok lemme try
The returned pointer may be temporary and should not be stored for later use.
|
|
|
|
|
I have implemented 2 threads simulating the counting semaphore. One thread sleeps for 20 milliseconds as in Sleep(20);
The other thread writes the time into a file. When i observe the file, in my System it prints for 50 times/second, which should be the case (20 milliseconds * 50 = 1000 milliseconds = 1second).
In other computers, it writes only 32 times / second in the file.
What could be the problem.?
|
|
|
|
|
that might be beacause windows is not a real-time kernel. so, if an application is running in kernel mode, even if your interrupt signal must call your asynchronous function, that one will have to wait for the process running ends its part.
So, using such functions is not precise if you want your event to process each n seconds. prefer an interrupt handler.
TOXCCT >>> GEII power
|
|
|
|
|
nandha wrote:
What could be the problem.?
That you are relying on Sleep(), and assuming that time is consistent between computers, especially if they are running different OSs. Read this article on why time is not always accurate.
"The pointy end goes in the other man." - Antonio Banderas (Zorro, 1998)
|
|
|
|
|
Get source of information, thank you.
MSN Messenger.
prakashnadar@msn.com
"If history isn't good, just burn it." - Sidhuism.
|
|
|
|
|
Hi,
For SSL Tunneling for HTTP Proxy
connect command is CONNECT www.someaddress.com:5444(port) HTTP/1.0
But wt is the CONNECT command for Socks proxy
plz reply thanx
|
|
|
|
|
Is SSL a layer to, say, winsock or are you using SSL's buildin socket?
Kuphryn
|
|
|
|
|
Hello
I am working on a MFC SDI application.
On My one of the menu i am drawing something with the CDC which is Memory dc and is drawing in a bitmap.
Above mentioned CDC MemDC is global.
Now on Save
I am having two Options
save content of CDC to JPEG and
save as BMP.
Well I am using implementation fo ImageHandler (from Codeguru) so it works fine. With JPEG saving. It does uses the CDC for putting into JPEG image.
Now with BMP saving, previously i was using CDibSectionLite (from Codeguru) using the above Bitmap. I want to use CDC instead because of change in the design.
Is there any other way to save content of DC directly to the Bitmap file
Thanks in advance.
Sandeep
Leave your mark wherever you go
|
|
|
|
|
Hi there,
I'm a bit new to C++, been doing Java for a while now and I was just wondering if there is a way to get the 'Start Button' to appear as an entry in the context menu that appears when you right click on the desktop, if not any suggestions on how I should go about it?
Cheers,
/P/
|
|
|
|
|
First of all, i consider u r familiar with the VC++ IDE.
So, first of all, add a "Resource Script" to ur project. Then insert an MENU into it. Add a few feilds to the menu and give it a "DENTIFIER STRING".
Then to display a CONTEXT MENU u hav 2 write:
IN MFC:
void CMenuTestView::OnRButtonDown(UINT nFlags, CPoint point)
{
CMenu myMenu;
CMenu *ptrMenu;
myMenu.LoadMenu(IDR_MYMENU);
ptrMenu=myMenu.GetSubMenu(0);
ClientToScreen(&point);
ptrMenu->TrackPopupMenu
(
TPM_LEFTALIGN|TPM_RIGHTBUTTON,
point.x,
point.y,
this,
NULL
);
CView::OnRButtonDown(nFlags, point);
}
IN WINDOWS API:
case WM_RBUTTONDOWN:
POINT p;
GetCursorPos(&p);
TrackPopupMenu(GetSubMenu(LoadMenu(gloInst,"MYMENU"),0),
TPM_LEFTALIGN | TPM_LEFTBUTTON,p.x,p.y,0,hwnd,NULL);
break;
...Avenger
Remember... testing & debugging are always part of programming ...so exterminate those stinking bugs
|
|
|
|
|
|
Hi!,
I want to create a read-only view of excel,word or powerpoint file using the ole techonology.
I use the default object handler provided in ole32.dll
I dont know what steps to follow after creating the object using:
hr=CoCreateInstance(clsid,NULL,CLSCTX_INPROC_HANDLER,
IID_IUnknown,(PVOID*)&pUkwn);
the object handler basically implements IDataObject,IOleCache and IViewObject.
IViewObject::Draw will draw on the specified device.
but before that I want to pass data to the object.
which interface shall I use?
thanks
Anshuman
|
|
|
|
|
Im getting this error in a project Im working on, its referencing a .cpp file with function definitions, Im using the same .h & .cpp file on their own just using a main.cpp to test it and it works fine, but when I brought it over to the larger project I get this error:
fatal error C1010: unexpected end of file while looking for precompiled header directive.
I checked the MSDN library and it was of absolutly no help whatsoever, I dont know what it even means. Im using VC7 with win2k.
Cheers
We have a mathematician, a different kind of mathematician, and a statistician!
|
|
|
|
|
arf, i've already seen that error, and i've got abslolutely no idea about its cause.
To avoid that, check Your project settings and disable the precompiled headers... it will work.
if anybody know about the reason this error occurs, let us know !!
TOXCCT >>> GEII power
|
|
|
|
|
put #include "stdafx.h" at the top of the file.
Or, go to project->settings and select the file. Go to C++->Precompiled Headers and set it to "Not using precompiled headers"
|
|
|
|
|
Your larger project is setup to use precompiled headers. This allows you to setup a set of include files that are used through-out your project and have them compiled just once. This is normally done by including the required headers in stdafx.h. Then when compiling the project VC++ expects stdafx.h to be included at the start of each .cpp file.
Just add #include "stdafx.h" to the start of the new .cpp file.
|
|
|
|
|
|
Someone asked me this question this morning - and I didn't have an answer. Can anyone explain why it is bad to use a macro function?
Dylan
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
