|
Hi there,
I want to build an RPL compiler (for HP calculators) in Managed C++.
I discover Managed C++ and .NET (I come from MFC), I saw the CodeDOM set of classes.
Will these classes help me to write my compiler?
In this RPL compiler, I want input a text file (with keywords, syntax etc.), and it generates a series of code ready to be linked. and once the program is linked, download it in the calculator 
If CodeDOM is the correct tool for what I wanna do, can anybody show me some samples about CodeDOM?
Thanks for the help.
Best regards.
Bouli.
|
|
|
|
|
CodeDom is quite esy, but painfull to write (too much typing IMO), but seeing a RPL calc only uses simple operations, I suugest you look into dynamic assemblies, created with Reflection.Emit. As a starting point, look at AppDomain.DefineDynamicAssembly().
Good luck
leppie::AllocCPArticle("Zee blog");
Seen on my Campus BBS: Linux is free...coz no-one wants to pay for it.
|
|
|
|
|
Hi,
Thanks for answering me
what I want to do is not an RPL calculator, but making a full compiler that will recognize syntax, keywords and so on from RPL language (it contains assembler too) and it will generate binary code that will run directly in the calculator.
ie:
the RPL programm look like this
::
ClrDA1Ok * clear 1st line
"Hello world" DISPROW1 * display "Hello world" on the 1st line with medium font
;
The compiler will generate the binary code that when it will run on the calculator...
For the compiler, in this example, only "::" and ";" are keywords.
ClrDA1OK and DISP1 are instructions (from a file) that correspond to readable entry point in the ROM of the calculator.
a declaration look like this:
=ClrDA1OK EQU #390CC *
=DISPROW1 EQU #1245B *
when the compiler sees ClrDA1OK, he knows that it has to replace this by "CC093" (inverted code for #390CC) = and EQU are keywords (this definitions are differents from the DEFINE keyword  )
This compiler, has lot of keywords and it can mix assembler & RPL. I think, the best way to do that will be into 3 programs:
- Preprocessor (it will generates lines of textual code ready to be assembled)
- Assembler (it takes lines of code, handly written or generated by the preprocessor into machine code independent from the HP platform HP48-HP49 etc...)
- Loader/Linker (it generates the apropriate code ready to be transfer in the apropriate calculator)
I think .NET can do the job in a more easy way as MFC. .NET framework provides a lot of classes that are designed for this job
Maybe you or someone can show me what way to ride...
Best regards.
Bouli.
|
|
|
|
|
Hi all,
I am trying to use the InternetExplorer object to automate Internet Explorer from my Managed C++ application;
The following is a snippit of C# code that compiles and runs.
using SHDocVw;<br />
............<br />
............<br />
private SHDocVw.InternetExplorer m_IExplorer = null;<br />
..............<br />
............<br />
..........<br />
m_IExplorer = new SHDocVw.InternetExplorer();
However, when I convert it to Managed C++, thus;
using namespace SHDocVw;<br />
............<br />
............<br />
private: SHDocVw::InternetExplorer m_IExplorer;<br />
..............<br />
............<br />
..........<br />
m_IExplorer = new SHDocVw::InternetExplorer();
I get the compile error
C3153: 'SHDocVw::InternetExplorer' : you cannot create an instance of an interface
Does anyone know what I am doing wrong?
Regards,
Chris
|
|
|
|
|
Change
Chris Morrison wrote:
private: SHDocVw::InternetExplorer m_IExplorer;
m_IExplorer = new SHDocVw::InternetExplorer();
To
SHDocVw::InternetExplorerClass* ieForAutomation;
ieForAutomation = new SHDocVw::InternetExplorerClass();
Take a look at the VC.NET - Interop - Automate IE example found in the MSDN Visual C++ .NET 2003 Code Samples[^]. I bet this sample is doing some of the exact stuff you are trying to do!
Roger Stewart
"I Owe, I Owe, it's off to work I go..."
|
|
|
|
|
Roger Stewart wrote:
Change
Chris Morrison wrote:
private: SHDocVw::InternetExplorer m_IExplorer;
m_IExplorer = new SHDocVw::InternetExplorer();
To
SHDocVw::InternetExplorerClass* ieForAutomation;
ieForAutomation = new SHDocVw::InternetExplorerClass();
Thanks Roger, I just cracked it by looking though the MSDN Library. Thank you for that link as well, that sample should come in very handy.
Kind Regards,
Chris
|
|
|
|
|
i am not able to add a reference from the project menu.
|
|
|
|
|
In the "Add Reference" dialog (_not_ "Add Web Reference"), on the ".NET" tab, scroll down and select "System.Web.DLL". Add it to the project references by clicking the Select button, then OK.
Alternatively, you can manually identify references to the compiler in code with #using, or on the command line with the "/FU" flag.
Nick Hodapp
This posting is provided “AS IS” with no warranties, and confers no rights. You assume all risk for your use. © 2003 Microsoft Corporation. All rights reserved.
|
|
|
|
|
http://www.codeproject.com/shell/shellextguide1.asp
class ATL_NO_VTABLE CSimpleShlExt :
public CComObjectRootEx<CComSingleThreadModel>,
public CComCoClass<CSimpleShlExt, &CLSID_SimpleShlExt>,
I don't know what this function is inheriting. I have only seen these used in templates. Can I get some help or reading material or a better phrase to search under?
Thanks
|
|
|
|
|
it's for templating.
a quick look at msdn shows
template< class ThreadModel> class
for
CComObjectRootEx .
templates are extremely useful if you have a class or function that should take in more than one object type (like a string, or an int...it saves the time of having to write multiple instances of code to handle different containers.)
check out templates on msdn.
*.*
cin >> knowledge;
|
|
|
|
|
ok, so I am inheriting only specific functions then, and these functions are templated?
|
|
|
|
|
Dear viewers !
This is Sardar Ahmed Bilal doing BCS(Hon) from AMI Iqra University Peshawar Campus. And want your help to make a good interactive Project(Software) for the User's for our university like let say a Keyboard(its an example), and for that i want your suggestions and codes help and some description also with your code about that code to help me out coz i completed my C++(Part-1->Fundantals, & Part-2->Object Oriented Programming Language) in the third Semester and right now i have forgotten almost all of it but still i can do it by the hepl of you people so plz help me out, THank You, Bilal
|
|
|
|
|
Hi folks,
I have an MFC project and I wrapped it by Managed C++. This project works well. But there is something that annoys me. I tried to see the assembly generated by Managed C++ in .NET object browser. I saw some other stuff except for my classes and namespaces have been exposed to the object browser that's not good. Is there any way to hide these unnecessary components from assembly so that they do not show up in object browser?
Please advise me. Thank you.
Arash
Arash Sabet
Computer Engineer
E-mail: afifi@sympatico.ca
|
|
|
|
|
Change the accessibility of the members you don't want to be visible or accessible outside of the assembly. I.e. "public" to "private" or "private public".
A common one is the destructor of a managed object. Set its accessibility to "private public" to make it accessible only within the scope of the assembly.
Nick Hodapp
This posting is provided “AS IS” with no warranties, and confers no rights. You assume all risk for your use. © 2003 Microsoft Corporation. All rights reserved.
|
|
|
|
|
Implement the following C routine permission(inode,mask) – this routine checks whether a specified access mode is allowed for the file associated with an inode.
|
|
|
|
|
Why the return type doesn't have significance in function overloading. What might be reason in compilation designing for this issue.
Maruthi
|
|
|
|
|
I have an assembly that I built in C# and I wanted to be able to use it in an extended stored procedure. Does anyone know if this is possible? Thank you very much for your time.
|
|
|
|
|
I have a HID device (magnetic cardreader) that uses a usb port to connect to a computer running any version of windows. I want to be able to figure out what port the device is on and read information from it. I know I need to use the Win32 API, but I haven't been able to find any useful information on how to do this. Can any one help?
Thanks in advance.
|
|
|
|
|
I would start by looking at the work Camilo Toro has done. He has wrapped the needed portions of Win32 in a C# class. You'll be able to do what you want without writing much code at all. His work, called USBSharp, can be found on Jan Axelson's HID Page[^]. (Jan is the author of USB Complete, a great book to wet your taste buds.) For more details, look at the rest of Jan's site, the MS DDK, and MSDN of course.
Hope this helps,
Chris
|
|
|
|
|
Thanks for the link. I could have used that a few years ago when I was trying to have 2 independent usb mice...
John
|
|
|
|
|
I create dialog to load bitmap file and I change file a little.I create dialog to save file but I don't know code that can save bitmap image.
Could u tell me ?
|
|
|
|
|
I think you are talking about this:
Class CBitmap has the method Save. It's overloaded in five constructors.For instance one of them get the parameters --- pBitmap::Save( System::String__gc , System::Drawing::Imaging::ImageFormat__gc)
where in the string you put a name for saving the file ( actually you put whole path ), and in the second one you specify the requiered format that you want for this saved image.
Yes it's so simple to save your new bitmap as Gif, Tiff, JPeg, Icon and so on.
For instance you can use this function in this way:
{....
System::String * mark = S"\\";
//We open an openFileDialog in our form, we suppose that are
//filtered for only show BMP files.
System::Windows::Forms::OpenFileDialog * openFileDialog1 = new System::Windows::Forms::OpenFileDialog();
openFileDialog1->ShowDialog();
//We get the selected file path
String* strResult = openFileDialog1->FileName;
System::Drawing::Bitmap * pBitmap;
//and open it in our Bitmap
pBitmap = new System::Drawing::Bitmap( strResult);
//We search the last '\' in the path for change the name of the file and
// the extension
int Index = strResult->LastIndexOf (mark);
strResult = strResult->Substring(0,Index);
strResult = strResult->Concat(strResult,S"\\ITS_OK.jpg" );
//finally you can save it with your new desired format (or the same one)
pBitmap->Save(strResult, System::Drawing::Imaging::ImageFormat::Jpeg );
}
if your question is in another way, please reply me.
Best Regards!
|
|
|
|
|
Hi
Im try to get the icq api to work in c# but i trapped into a big problem.
The dll-function:
ICQAPICall_GetOnlineListDetails
BOOL WINAPI ICQAPICall_GetOnlineListDetails(int &iCount, BPSICQAPI_User **ppUsers);
In (Arguments): None
Out (Returns): iCount, ppUsers
iCount - the number of Users to follow
ppUsers - a pointer to the users’ array.
Description: The data returned is in the order of the online list, top to bottom. The users array is initialized with the user’s ICQ# (m_iUIN field) and the Window Handle (m_hFloatWindow) if the user is “floating”. The users array should be freed by calling ICQAPIUtil_FreeUsers to free each user structure and the array itself.
The iCount Parameter i get correctly with passing "out iCount" to the function (it will return the exact count), but the array gets size 1 and consists garbage. I used this:
[MarshalAs(UnmanagedType.LPArray)]
BSICQAPI_User[] ppUsers //its a array of structs.
It doesnt matter if i do ref or not in the function header.
Does somone know how i can get the right parameter for BPSICQAPI_User **ppUsers ?
THX
sorry for my bad english
|
|
|
|
|
Oh damn wrong forum....can someone move to c#´?
|
|
|
|
|
Hey all, is anyone out there attempting to wrap the winXP p2p sdk in some type of managed dll so that it can be more easily used in a .Net project? I'm working on it (slowly) but would love to give it up if someone else has done this already.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
