|
Hi all! I'm new to SAPI and I was wondering how you can get your application to use another speech engine other than the MS ones. I installed the Dragon Naturally Speaking 7 engine but it doesn't show up in the speech properties dialog so you can't select it. I've heard that you can use SpEnumTokens() to find all the engines available but am I right in thinking that this only searches in the Microsoft directory in the registry and not any others? Please help me! I'm desperate!!
Thanks for ANY help!
|
|
|
|
|
Hello all,
I am having some troubles with tracing memory leaks in VC++ 6. I have a program which includes a bunch of DLLs, now when I execute it and shut it, it dumps quite a bit of garbage from memory. Usually it states where the object was created, but in this case it doesn't, it only dumps objects. This leads me to believe that the memory leak is generated in one of the linked DLLs.
Is there any trick or program which can figure out where the memory leak comes from? I have no idea where it originates and I'd like to clean it up...
Thanks,
- Fahr
|
|
|
|
|
Did you take a look at the bottom of the "Debug" pane? That shows where they usally come from? (I assume you have done that). Next, do you have access to the dll source code? There is an application that will determine memory leaks, but I cannot think of it right now...
Larry
Larry J. Siddens
Cornerstone Communications
TAME THE DOCUMENT MONSTER
www.unifier.biz
|
|
|
|
|
I have access to the source of all the DLLs. And like I said; it does NOT state the origin of the memory leaks, it must be one of the DLLs, but I can't figure out which one.
Please remember the title of that program! 
|
|
|
|
|
Make sure you build all the dll's in Debug. Run you application in Debug (inside the studio). Exit your application (when you know that the leaks (or suspected leaks occurre)). Open the output pane window, click the "Debug" tab, then go to the bottom. If there are memory leaks (that VS can find) they will be listed. Then if you double click on the source file, it will take you to where the item was created and then not released.
Again, I am assuming that you have done all this.
Larry
Larry J. Siddens
Cornerstone Communications
TAME THE DOCUMENT MONSTER
www.unifier.biz
|
|
|
|
|
Yes, I have done it all.
The point is that I DO see a HUGE list of memory leaks, I have a slight idea from which DLL and even class they come, but it wont give out any source files and/or lines. Only dumps objects...
|
|
|
|
|
Now I'm confused. I have several projects that I check that are built (the whole project including the dll's) and when there is a leak, it will give me the file/line of the offending object even if it is in the dll!
When you compile your project, is the dll a dependency(sp) of the main project?
Larry
Larry J. Siddens
Cornerstone Communications
TAME THE DOCUMENT MONSTER
www.unifier.biz
|
|
|
|
|
No, they're not dependencies. We have multiple actual programs which use the same shared DLLs, so the DLLs are mostly standalone projects alltogether.
You think I can trace the leaks when I include the DLLs in question in the workspace of my project?
|
|
|
|
|
Yep I do. I thought you were already doing that. Do you know how to make them a dependancy? I'm assuming yes.
Larry
Larry J. Siddens
Cornerstone Communications
TAME THE DOCUMENT MONSTER
www.unifier.biz
|
|
|
|
|
I guess just adding them to the workspace will do the trick, no?
If not, then please tell me 
- Fahr
|
|
|
|
|
Yes. But you have to make sure that the main exe project depends upon these dll's. This is done by: In the File View, right click on the "Workspace", Select "Insert Project into Workspace", when the dialog comes up, select the project to insert (the DLL in question), then check the "Dependency of" and select the main exe. When finished, make sure that you have "Debug" selected as the build and do a "Build All". This will compile the files for the DLL and your exe that uses them. Run the puppy and see what happens.
Larry
Larry J. Siddens
Cornerstone Communications
TAME THE DOCUMENT MONSTER
www.unifier.biz
|
|
|
|
|
Ok, I will try this when I'm back at work tomorrow
Thanks a lot for the info, I'll let you know how it ended
- Fahr
|
|
|
|
|
Any luck?
Larry J. Siddens
Cornerstone Communications
TAME THE DOCUMENT MONSTER
www.unifier.biz
|
|
|
|
|
eh, sorry, forgot to reply... it all worked out fine
Mem leaks found and resolved, thanks a lot for the tip!
|
|
|
|
|
i am new to visual C++, need to create an SDI where I have a view frame for 3D visualization and another frame where i have all the controls such as buttons, listboxes. How do i do this?
|
|
|
|
|
Look at the 'Splitter windows' articles in the 'MFC controls' section. You'll find some interesting articles!
|
|
|
|
|
 Hi,
I want to add a button on title bar..just previous to close button and add some functionality to it..can i do that first of all..and if i can then can you show me some pointers or path or tutorials to do it..I need it urgently..Please reply..Thanks in advance for the help..
Himanshu
|
|
|
|
|
You should be able to simulate a button on the title bar simply by positioning it with MoveWindow.
|
|
|
|
|
Why toolbar is drawn in window created by CreateEx() -
not LoadFrame() like CMainFrame,
shows only CView-like toolbar -
it under flat level menu of window?
And CView size must take toolbar size into account in
client area in OnSize() ?
<br />
hr = m_PAlarmWnd-><br />
CreateEx(<br />
NULL|WS_EX_CLIENTEDGE ,
NULL,(LPCTSTR)strHeading<br />
,WS_VISIBLE |WS_CAPTION|WS_POPUP|
WS_SYSMENU| WS_THICKFRAME| WS_MINIMIZEBOX| WS_MAXIMIZEBOX <br />
,0,0,900,600, <br />
pParent->GetSafeHwnd(),<br />
pMenu->GetSafeHmenu()
,0);<br />
____
why also
do not displays tooltips,
but if to do not insert style TBSTYLE_FLAT
tooltip appears ?
|
|
|
|
|
Hello!
I'll try to explain my problem as precise as possible.
Imagine I have several charts on the screen that displays some signals. I want to let the user calibrate them when he wants. So, I open a dialog in wich he can enter the data for the calibration of the signal.
Up to here, no problems. But I want the signals to be active in background! So I need this dialog to be in a indepedant thread. But this give me a Debug Assertion Fault.
Here is my code:
DWORD WINAPI CalibrateThreadProc( LPVOID pParam )
{
CCalibrateDlg* pCalDlg = new CCalibrateDlg;
pCalDlg->DoModal();
return 0;
}
void CMonitoringDoc::OnCalibrate()
{
DWORD ThreadID;
HANDLE m_pCalibThread = CreateThread(
NULL,
0,
CalibrateThreadProc,
this,
0,
&ThreadID);
}
What is the problem ?? I don't pass any C++ object through the thread (or I don't use it).
Thanks
|
|
|
|
|
Sorry, I never think about modeless dialogs 
|
|
|
|
|
You haven't said where the ASSERT is occuring, but I assume it is in pCalDlg->DoModal();
I'd suggest forgetting the thread and using a modeless dialog, which will be a lot simpler. If you want to persist with the thread then you need to derive a class from CWinThread. Read up on UI threads vs. Worker threads.
I use modal dialogs in threads in ED (see sig) which appear as modeless dialogs as far as the user is concerned. The various Find dialogs work this way. It is a fair bit of work though to get everything working properly.
Neville Franks, Author of ED for Windows. Free Trial at www.getsoft.com
|
|
|
|
|
Hello!
Yeap, that's what I'm doing now (see my previous post) and that works just fine!
Thanks
|
|
|
|
|
Hi,
I want write a SQL to insert records into my table(The table has
a large amounts of fields,more than 100).
The SQL is a CString, but it is too big and exceeds the
maxium length of a CString. Please help me how can I
create a string with any huge length? Code examples would
be more appreciated.Or any other method?
Thanks a lot.
wang
wang
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
