|
Ha the good old rewrite from scratch trick!
Works quite well once you know the problem well, which you did! 
Congratulations!
|
|
|
|
|
|
It is not an article. At best, it is a tip. If you want to see an article to compare yours against, read any of OriginalGriff's works, or Sergey Kryukov's works, or many others.
At most, your writing is a tip on a fun way to play with the 'Turtle' in python. You assume your readers know what the 'Turtle' is, which is not the case. You don't describe what the code does - it is more of a code dump. The writing could be greatly improved by giving a little background on the turtle, showing pictures of it and what your code does to it. It could also benefit from a better overview of what you learned during the creation of the code, and how it introduced you to Python programming.
Best wishes improving it, and creating more fun content!
|
|
|
|
|
Okay, thanks. I will fix that later. Don't know why I didn't think of that.
|
|
|
|
|
Hello and Welcome
You appear to have a good start towards your career and the most important thing is to keep learning. This is a good place to learn, many experienced and professional programmers with many years of experience ready and willing to help a young beginner such as yourself.
The less you need, the more you have.
Even a blind squirrel gets a nut...occasionally.
JaxCoder.com
|
|
|
|
|
Thank you. Just wanted some info for what I need to do and if I am on the right track.
|
|
|
|
|
I will try to post it at noon GMT.
|
|
|
|
|
A new laptop will soon arrive to replace one that is over 5 years old. I'll then have the problem of migrating everything (software and files) to the new laptop.
Both laptops are Dells, running Windows 10. What would you recommend for doing the migration?
The last time, I recall using Laplink PC Mover Professional and an ethernet cable. Neither laptop has a built-in ethernet port, and I don't want to buy a second adapter, so I'd probably use a USB cable this time. I could use Laplink's software again, but it only works with a USB cable that you have to buy from them at a stupid price. Annoying, so I wanted to see if anyone had other suggestions.
|
|
|
|
|
Take the chance and continue with a fresh and clean laptop and forget the old trash 
|
|
|
|
|
Quote: 0x01AA wrote: continue with a fresh and clean laptop and forget the old trash
I actually second this.
I also followed this path when upgrading - installed stuff on the go, as soon as I noticed I needed it. Not beforehand. At first sight it looks like you'll miss a lot of stuff (like *really* a lot), and are more busy installing than working, but it pays of in the long run.
Now I only have stuff on my laptop that I really need (i.e. no more Visual Studio, no more IIS-sh*t, which saves me tons of gigabytes). If needed, I can always RDP into my main machine (let's face it: how many times did you work in the last couple of years when there was no internet connection? For me: almost none. There you go).
I now enjoy a lightweight laptop. Until the next upgrade, that is 
|
|
|
|
|
I'll strongly second the second. It's amazing how much stuff from your old machine you think you'll need, but you won't. At least, that's been my experience.
The only thing I'd add would be to make sure you have a full backup of all personal files from the old laptop. Personally, I'm comfortable with them on OneDrive or Google Drive (both companies know everything about me already). Then, start fresh on the new machine and just pull files down as needed.
It is a very freeing experience.
|
|
|
|
|
Similar here. My solution is not to scrap the old machines and stow them away as a backup(?).
And the reality: Now I have at least six old machines... never touched/needed them for years, but still afraid to throw them away. This is also a/my kind of paranoia
[Edit]
 I do the same with coffee/espresso machines 
|
|
|
|
|
glare
looking over my shoulder at my last 3 laptops....
Charlie Gilley
“They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.” BF, 1759
Has never been more appropriate.
|
|
|
|
|
Ha! I used Laplink when it required a custom serial cable (late 80s).
I rang out the pins of one and cobbled up adapters so I could copy several PCs at once.
|
|
|
|
|
|
If you can, remove the hard drives/SSDs/NVMEs from both laptops and plug them into ports inside a desktop.
Both USB and LAN are terribly slow compared to SATA/PCI-express.
I always image the drives before using them for something else and I recently had to do a drive upgrade (in linux).
The oldest SATA3 SSD disk (250GB) took over 4h using USB 3.0 to make an image. I remade the image (because of errors in the first attempt) with the drive connected to a SATA port and it took some 20min. The newest NVME disk (1TB) took under 1h to image.
Note that my 10 year old motherboard is PCI-express 2.0 and does not have a NVME port, I use an adaptor NVME->PCI-express.
As far as software is concerned, I am sorry but I can not offer any suggestions. I do not use Windows since they announced Windows 8.
|
|
|
|
|
Before you buy anything check CUKUSA.com[^]
They have a silly name, but their prices are fantastic and they use anywhere from mid to top shelf components.
They primarily market to gamers, but look around, because I use gamer systems sans fancy video as coding workstations and they're fantastic for that.
Real programmers use butterflies
|
|
|
|
|
Too late, but thanks for the reco. I did check out their site, and my guess is that my laptop is comparable to what they offer. I've been pleased with 3 Dells in a row, so I got an XPS17. It has a 17" screen, which wasn't offered last time (an XPS15). I like the 17" because I don't bother with monitors, partly because SWMBO appropriated my large desk, so I'm stuck with a puny one. 
|
|
|
|
|
Well keep them in your back pocket. I ordered a dev machine from them in january, and it's fantastic. I can't believe how little I paid for it, and they have state side support I didn't even have to wait for. Plus they sell on amazon.
Between the prices, build quality and support, I really don't know how they do it. I feel a bit like I'm in a stephen king novel when I peruse their stock, like if I order something that seems too good to be true at the price, something terrible will happen to me later.
Real programmers use butterflies
|
|
|
|
|
I love my old Dell XPS 17, which is why I've hung on to it for 10 years. 17" screen, plus a KB that isn't all scrunched together. Also has a second HD bay which was handy when I upgraded to a SSD drive (made my original drive the secondary, copied files across that I needed).
If Dell is making the XPS 17 again, I will probably get one...
|
|
|
|
|
That's what I had before my current XPS15, and now I'll finally have one again.
|
|
|
|
|
One option would be to image the old drive, then restore that image to the new laptop (having first imaged that in case it all goes to pot). You may/will have driver issues which may/can be resolved afterwards. If it works you've saved a lot of hassle, if it doesn't you at least have an image of the old setup in case you should ever need to look for something.
|
|
|
|
|
Don't migrate applications or settings. This will prevent registry corruption from migrating. Reinstall the applications from source and move your files over.
|
|
|
|
|
I purchased a 2tb sub from Dropbox last year and moved files I want to keep over there. when I changed my laptop a couple months ago I used Dropbox to get what I had to have.
I keep most of my downloaded files, so I almost always have the version I installed before and then there were the documents that I need.
I tell Dropbox not to download everything to the new lappy then, as has been suggested, only install as I need something.
Jack of all trades, master of none, though often times better than master of one.
|
|
|
|
|
The laplink software will run on local ethernet.
My biggest complaint about it is that it transfers things that don't work properly after they arrive, some rearranging and reinstalling is always needed.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
