|
Now that you know the line, you need to identify which part is the problem. Is it the DataKeys[row.RowIndex] or is it Values[0]? My suspicion is that it's the latter - in other words, you don't actually have a value in there.
|
|
|
|
|
I don't see the out of range error anymore. It doesn't update but deletes the first record in the database. I getting this error: The variable name '@id' has already been declared. Variable names must be unique within a query batch or stored procedure.
|
|
|
|
|
using System;
using System.Data;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Data.Sql;
using System.Data.SqlClient;
using System.Configuration;
using System.Web.UI.WebControls.WebParts;
namespace StaffingWebParts.KeyPerTest
{
public partial class KeyPerTestUserControl : UserControl
{
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["SQLStaffingConn"].ConnectionString);
SqlCommand cmd = new SqlCommand();
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
DataTable dt = new DataTable();
dt.Columns.Add("ID");
dt.Columns.Add("Name");
dt.Columns.Add("VDCIDIQ");
dt.Columns.Add("VDCFFS");
dt.Columns.Add("VDCHIM");
dt.Columns.Add("VDCWEBHOSTING");
dt.Columns.Add("VDCCWF");
SqlDataReader myReader = null;
SqlCommand cmd = new SqlCommand("SELECT ID, Name, VDCIDIQ , VDCFFS, VDCHIM, VDCWEBHOSTING, VDCCWF from CMS_Key_Personnel where Name <> ' ' order by Name");
cmd.Connection = conn;
conn.Open();
myReader = cmd.ExecuteReader();
while (myReader.Read())
{
DataRow dr = dt.NewRow();
dr[0] = myReader["ID"].ToString();
dr[1] = myReader["Name"].ToString();
dr[2] = myReader["VDCIDIQ"].ToString();
dr[3] = myReader["VDCFFS"].ToString();
dr[4] = myReader["VDCHIM"].ToString();
dr[5] = myReader["VDCWEBHOSTING"].ToString();
dr[6] = myReader["VDCCWF"].ToString();
dt.Rows.Add(dr);
}
gvKeyPersonnel.DataSource = dt;
gvKeyPersonnel.DataBind();
if (gvKeyPersonnel.Columns.Count > 0)
gvKeyPersonnel.Columns[0].Visible = false;
else
{
gvKeyPersonnel.HeaderRow.Cells[0].Visible = false;
foreach (GridViewRow gvr in gvKeyPersonnel.Rows)
{
gvr.Cells[0].Visible = false;
}
}
conn.Close();
}
}
protected void gvKeyPersonnel_RowUpdating(object sender, EventArgs e)
{
using (SqlCommand cmd = new SqlCommand())
{
cmd.Connection = conn;
conn.Open();
foreach (GridViewRow row in gvKeyPersonnel.Rows)
{
SqlDataAdapter da = new SqlDataAdapter("", conn);
cmd.CommandText = "UPDATE SP2010_EDCStaffing_AppDB.dbo.CMS_Key_Personnel SET Name = @Name, VDCIDIQ = @VDCIDIQ, VDCFFS = @VDCFFS, VDCHIM = @VDCHIM, VDCWEBHOSTING = @VDCWEBHOSTING, VDCCWF = @VDCCWF WHERE ID = @id";
cmd.Parameters.AddWithValue("@id", Convert.ToInt32(gvKeyPersonnel.DataKeys[row.RowIndex].Values[0]));
cmd.Parameters.AddWithValue("@Name", row.Cells[1].Text);
cmd.Parameters.AddWithValue("@VDCIDIQ", row.Cells[2].Text);
cmd.Parameters.AddWithValue("@VDCFFS", row.Cells[3].Text);
cmd.Parameters.AddWithValue("@VDCHIM", row.Cells[4].Text);
cmd.Parameters.AddWithValue("@VDCWEBHOSTING", row.Cells[5].Text);
cmd.Parameters.AddWithValue("@VDCCWF", row.Cells[6].Text);
cmd.ExecuteNonQuery();
}
conn.Close();
}
}
}
}
|
|
|
|
|
The reason you're getting this exception is because you're attempting to add the parameters to the same command object inside a loop. This will work on the first trip through the loop, but will fail on the next trip through. A way around this is to do cmd.Parameters.Clear(); before you start adding the parameters in. This will ensure the parameters collection has no entries on each journey through the loop.
|
|
|
|
|
Okay that got rid of that error. Thanks but my update delete all of the fields. I now have in my database the id's number of all of the previous rows. How can I just update the database with what I have in my datgridview?
|
|
|
|
|
As I don't know what keys are on either side of the equation here, I can't help you. It's up to you now. Step through the code and note the values that you're seeing - in particular, what's getting assigned to @ID. That's the one that's causing you issues, so that's the line that you are going to have to inspect. It's pretty apparent that the wrong value is being written to that field - you are in the best position to see what that value is.
|
|
|
|
|
Thanks for your help. I am now writing out a record to the database. The problem is writing the same first record over 42 times. You are correct the @ID is the culprit. I got to figure how to increment it.
|
|
|
|
|
Looking at your code, you have put the ID in cell 0 and made it invisible. Why not just use the contents of that cell for your ID instead?
cmd.Parameters.AddWithValue("@id", row.Cells[0].Text));
cmd.Parameters.AddWithValue("@Name", row.Cells[1].Text);
cmd.Parameters.AddWithValue("@VDCIDIQ", row.Cells[2].Text);
cmd.Parameters.AddWithValue("@VDCFFS", row.Cells[3].Text);
cmd.Parameters.AddWithValue("@VDCHIM", row.Cells[4].Text);
cmd.Parameters.AddWithValue("@VDCWEBHOSTING", row.Cells[5].Text);
cmd.Parameters.AddWithValue("@VDCCWF", row.Cells[6].Text);
|
|
|
|
|
Sorry that didn't work. It started loaded at the second record. and loaded the database with that record only.
|
|
|
|
|
|
protected void gvKeyPersonnel_RowUpdating(object sender, EventArgs e)
{
int @ID = Convert.ToInt32(gvKeyPersonnel.DataKeys[0].Value.ToString());
TextBox @Name = (TextBox)gvKeyPersonnel.Rows[0].FindControl("txtName");
TextBox @VDCIDIQ = (TextBox)gvKeyPersonnel.Rows[1].FindControl("txtVDCIDIQ");
TextBox @VDCFFS = (TextBox)gvKeyPersonnel.Rows[2].FindControl("txtVDCFFS");
TextBox @VDCHIM = (TextBox)gvKeyPersonnel.Rows[3].FindControl("txtVDCHIM");
TextBox @VDCWEBHOSTING = (TextBox)gvKeyPersonnel.Rows[4].FindControl("txtVDCWEBHOSTING");
TextBox @VDCCWF = (TextBox)gvKeyPersonnel.Rows[5].FindControl("txtVDCCWF");
using (SqlCommand cmd = new SqlCommand())
{
cmd.Connection = conn;
conn.Open();
foreach (GridViewRow row in gvKeyPersonnel.Rows)
{
cmd.CommandText = @"UPDATE SP2010_EDCStaffing_AppDB.dbo.CMS_Key_Personnel SET Name = @Name, VDCIDIQ = @VDCIDIQ, VDCFFS = @VDCFFS, VDCHIM = @VDCHIM, VDCWEBHOSTING = @VDCWEBHOSTING, VDCCWF = @VDCCWF WHERE ID = @id";
cmd.Parameters.AddWithValue("@id", Convert.ToInt32(gvKeyPersonnel.DataKeys[row.RowIndex].Values[0]));
cmd.Parameters.AddWithValue("@Name", Name.Text);
cmd.Parameters.AddWithValue("@VDCIDIQ", VDCIDIQ.Text);
cmd.Parameters.AddWithValue("@VDCFFS", VDCFFS.Text);
cmd.Parameters.AddWithValue("@VDCHIM", VDCHIM.Text);
cmd.Parameters.AddWithValue("@VDCWEBHOSTING", VDCWEBHOSTING.Text);
cmd.Parameters.AddWithValue("@VDCCWF", VDCCWF.Text);
cmd.ExecuteNonQuery();
cmd.Parameters.Clear();
}
conn.Close();
}
|
|
|
|
|
Whoah. Okay, that's really not going to work. You load the TextBoxes with one set of values and then you assign them on each iteration through the foreach. That's just going to set the values to the same values and I doubt that's what you want. You need to stop and have a think about what you're trying to achieve rather than just throwing things together in the hope that they will work. Write out the steps on a bit of paper and then code that up.
Drop the TextBox approach here - it's just not going to work.
|
|
|
|
|
Okay thanks. I am a newbie to C#. Don't I need to use Label instead of TextBox in ASP.Net GridView control?
|
|
|
|
|
It seems you have two separate issues that you're trying to fix here. The first is how to save the data from your GridView and the second one is how to display it/edit it. Is that correct?
Let's solve the first one - by assuming that you have somehow managed to display and edit the data back into the GridView. If we assume that, then you use the approach I outlined to perform your save. Don't try to save directly off the TextBoxes as that only applies to saving a single row. So, follow the code I outlined using the value in cell 0 to get your Id and save off that.
|
|
|
|
|
Yes I can display my Gridview and edit it. When I click update that is where the issue is?
You told me to cmd.Parameters.Clear(); Should that be in the foreach loop?
protected void gvKeyPersonnel_RowUpdating(object sender, EventArgs e)
{
using (SqlCommand cmd = new SqlCommand())
{
cmd.Connection = conn;
conn.Open();
foreach (GridViewRow row in gvKeyPersonnel.Rows)
{
cmd.Parameters.Clear();
cmd.CommandText = @"UPDATE SP2010_EDCStaffing_AppDB.dbo.CMS_Key_Personnel SET Name = @Name, VDCIDIQ = @VDCIDIQ, VDCFFS = @VDCFFS, VDCHIM = @VDCHIM, VDCWEBHOSTING = @VDCWEBHOSTING, VDCCWF = @VDCCWF WHERE ID = @id";
cmd.ExecuteNonQuery();
cmd.Parameters.AddWithValue("@id", row.Cells[0].Text);
cmd.Parameters.AddWithValue("@Name", row.Cells[1].Text);
cmd.Parameters.AddWithValue("@VDCIDIQ", row.Cells[2].Text);
cmd.Parameters.AddWithValue("@VDCFFS", row.Cells[3].Text);
cmd.Parameters.AddWithValue("@VDCHIM", row.Cells[4].Text);
cmd.Parameters.AddWithValue("@VDCWEBHOSTING", row.Cells[5].Text);
cmd.Parameters.AddWithValue("@VDCCWF", row.Cells[6].Text);
}
conn.Close();
}
}
I must be missing something here? Thanks for your help and looking at it?
|
|
|
|
|
Yes it should. You need that to ensure you don't try and add the same parameters in again.
|
|
|
|
|
While in debug, I don't see any values in the fields? When I update all fields except the ID is deleted in the database. Don't I have to set the parameters first before using cmd.Parameters.AddWithValue?
|
|
|
|
|
Ta da!
You are executing the command "before" adding the parameters. Move
cmd.ExecuteNonQuery(); line after you have added the parameters. Also a tip:
Hope this helps.
You have just been Sharapova'd.
|
|
|
|
|
I have the cmd.ExecuteNonQuery(); at the end But by removing the foreach loop and adding
GridViewRow row = gvKeyPersonnel.Rows[e.RowIndex]; is giving me an error on RowIndexand if I put row instead of e it gives me a error on row. I still don't see any values in the debug. I have spend 5 days on this one and still don't see what is wrong.
protected void gvKeyPersonnel_RowUpdating(object sender, EventArgs e)
{
using (SqlCommand cmd = new SqlCommand())
{
cmd.Connection = conn;
conn.Open();
GridViewRow row = gvKeyPersonnel.Rows[e.RowIndex];
{
cmd.CommandText = "UPDATE SP2010_EDCStaffing_AppDB.dbo.CMS_Key_Personnel SET Name = @Name, VDCIDIQ = @VDCIDIQ, VDCFFS = @VDCFFS, VDCHIM = @VDCHIM, VDCWEBHOSTING = @VDCWEBHOSTING, VDCCWF = @VDCCWF WHERE ID = @id";
cmd.Parameters.AddWithValue("@id", Convert.ToInt32(gvKeyPersonnel.DataKeys[row.RowIndex].Values[0]));
cmd.Parameters.AddWithValue("@Name", row.Cells[1].Text);
cmd.Parameters.AddWithValue("@VDCIDIQ", row.Cells[2].Text);
cmd.Parameters.AddWithValue("@VDCFFS", row.Cells[3].Text);
cmd.Parameters.AddWithValue("@VDCHIM", row.Cells[4].Text);
cmd.Parameters.AddWithValue("@VDCWEBHOSTING", row.Cells[5].Text);
cmd.Parameters.AddWithValue("@VDCCWF", row.Cells[6].Text);
cmd.ExecuteNonQuery();
cmd.Parameters.Clear();
}
conn.Close();
}
}
|
|
|
|
|
Sorry, I should have mentioned this before.
If the gvKeyPersonnel_RowUpdating() method/handler is for OnRowUpdating event of the gridview (which looks like is), i.e. if you have the following property for your grid (in .aspx) :
OnRowUpdating="gvKeyPersonnel_RowUpdating" , then change the method's signature from
protected void gvKeyPersonnel_RowUpdating(object sender, EventArgs e)
to
protected void gvKeyPersonnel_RowUpdating(object sender, GridViewUpdateEventArgs e)
That should do.
You have just been Sharapova'd.
|
|
|
|
|
Yes I have OnRowUpdating="gvKeyPersonnel_RowUpdating property for my grid in aspx. Should I still removed foreach (GridViewRow row in gvKeyPersonnel.Rows). By the way how will it transverse through the datagridview with it?
|
|
|
|
|
Norris Chappell wrote: Should I still removed foreach (GridViewRow row in gvKeyPersonnel.Rows).
Yes, you should.
When you update any of the rows, it will fire up OnRowUpdating event of the grid and gvKeyPersonnel_RowUpdating() event handler will be called. Note that, since the event is firing up "only" for the row you are updating, you should only do the things related to that row (note that I said you "should"  ).
Now for your question:
Norris Chappell wrote: By the way how will it transverse through the datagridview with it?
The answer is simple - you don't want to traverse through every row in the grid since you are updating only one (for which the event is fired) at any given time.
Related: If you don't have it already, you may want to have a look at OnRowUpdated[^] event as well.
You have just been Sharapova'd.
|
|
|
|
|
Thanks for pointing that out to me. One last thing do my parameters look right. Should I I removed this too? cmd.Parameters.Clear();
|
|
|
|
|
I'm getting the following error: No overload for 'gvKeyPersonnel_RowUpdating' matches delegate 'System.EventHandler'
|
|
|
|
|
Norris Chappell wrote: Should I I removed this too? cmd.Parameters.Clear();
Since you are not inside a loop anymore, you may want to remove that line. But that won't matter much as the SqlCommand is going to be disposed anyway (at the end of the using block).
Also, since you are not using the foreach anymore, you may want to remove its "{ }" braces as well, as they are forming an unnecessary code-block at the moment.
You have just been Sharapova'd.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
