|
Hello,
I am stuck and need some advice.
I am using a DataGridView to store CSV data and then using Zedgraph to display this data. Most of these values in the CSV are numeric and I have no problems with these but I have several items in the CSV that are text and display a change of state from on/off, open/closed, active/inactive, etc..
I have been trying to work out a method to have Zedgraph handle these digital On/Off states. I can convert the values to 0 and 1 to represent the states and that seems to work okay but I still need to have a text description for these states so the user can see the actual state or condition of the circuit.
Is there some way that I can assign both, for example display something like Open(0) / Closed(1) and have Zedgraph use the numeric values?
Thanks
|
|
|
|
|
Hello,
I am beginner and I have the following problem.
I have installed:
- Visual Basic 2010 Express
- Microsoft FrameWork
- Microsoft SDK
When I try to install a .COM object (Mapwindow GIS), I have the following error: aximp.exe is not found
I do not know how to fix this error? They write a lot about this error on internet, but I don't understand registry...
Thank you for your help,
Cheers
Charles
|
|
|
|
|
Did you check 32/64bit issues? If your application is running on a 64bit OS, and you did not set it to x86, it will run as a 64bit application. When that COM object is a 32bit application, it won't find it. In such a case set the target platform to x86.
|
|
|
|
|
Hello,
Thank you for your quick reply. I just checked but it is not the problem. Both are 32bit 
|
|
|
|
|
I've started a process that runs a command line executable and takes several seconds to return. I've attached/enabled events (OutputDataReceived and ErrorDataReceived) to enable the returning of STDOUT and STDERR messages from the process as they appear.
All works fine, and all events return the lines of text as they should for stdout and stderr as they appear. But I've noticed that the OutputDataReceived and ErrorDataReceived events continue to be fired and return output *even after* the process.Exited() event has fired.
I would have thought that the process had not yet completed until the last of Error and Output events have been caught/raised, but perhaps there is some kind of buffering going on within the Process that I am unaware of. If this is so, how can I know when the Process has *truly* completed-- as in the OUT and ERR data have fired for the last time *and* the process has truly exited? Ideally I would not read the contents of the OUT and ERR until the process is truly completed, therefore telling me that there is no output to follow the Exited() event.
|
|
|
|
|
Your observations of redirected output continuing after the Exited event has fired is accurate. The Microsoft examples are misleading but buried somewhere in the documentation is the information you need, which is that the redirected streams send DataReceivedEventArgs.Data == null when they close.
Process.Exited on it's own isn't much use when outputs are redirected and for all practical purposes it's best to wait until all redirected streams have sent null before declaring the process complete.
Alan.
|
|
|
|
|
Thanks for the response, Alan.
A quick check confirms what you stated--that the OutputDataReceived and ErrorDataReceived are raised with a Nothing value for e.data as the last call after returning their respective data. Since this call happens only once (for each Received event) and *only* after the data is completed, I can set a local flag within the process for each Received event when that happens. Between the two flags and the process.hasexited() property I can raise a custom event along the lines of:
If Process.HasExited() and OutputDataReceived_IsCompleted and ErrorDataReceived_IsCompleted then
Raise Event Process_HasTrulyCompleted()
EndIf
This seems to be the only guaranteed manner of knowing that all the conditions are met.
|
|
|
|
|
Hello !
I have an application that use entity framework 6 on vb.net and sql server.
Inside the app.config file there is the connection string to this entity that is created automatically during wizard.
But when I finish the application , this connection string is inside the file Myapplication.exe.confg , and the users can open this file and can change connection string.
Is possible to remove the connection string from this file and to create during application startup , and after to include this connection string to entity declaration for example Dim entity1 as Myentities(Connectionstring).
My question is that if this is possible , how can I create the connection string with all information needed .
My current connection string inside the app.config is :
<connectionStrings>
<add name="Entity1" connectionString="metadata=res://*/Model1.csdl|res://*/Model1.ssdl|res://*/Model1.msl;provider=System.Data.SqlClient;provider connection string="data source=PC1;initial catalog=MyDB;integrated security=True;multipleactiveresultsets=True;application name=EntityFramework"" providerName="System.Data.EntityClient" />
</connectionStrings>
Thank you !
|
|
|
|
|
You could ignore the one in the config file and hard-code the one you want.
You may be able to encrypt the one in the config file.
It's probably best to leave it the way it is and not change anything unless it becomes a problem.
You'll never get very far if all you do is follow instructions.
|
|
|
|
|
Yes , it's become a problem because users that don't know what they are doing , can open it and change the information.
So I want to know how can I create on runtime?
Thank you !
|
|
|
|
|
dilkonika wrote: it's become a problem because users that don't know what they are doing , can open it and change the information.
That's a nonsense-argument.
There's more important things on the PC that they could break by accident. There's also no real way to abuse the information in the string. Stop being paranoid and come back if you got a good argument for hiding it.
dilkonika wrote: So I want to know how can I create on runtime?
It's a string;
Dim MyString As String = "Hello World"
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
Thank you !
To be honest , I have 2 reasons why I want to create the connection string on runtime :
First : it's for security measure to not let users change the file.
Second : I'm making some changes in application and there are situations when a users can work with a local sql server database.And there are situations that they should work with a database (has the same structure as the local database) but on another server in network.
I know it's a string but does it have a specific structure ?
Or should I copy paste from the connection string that is inside app.config ?
Thank you !
|
|
|
|
|
If your application is under any path under Program Files, normal users cannot change the connection string. Well, they can load the .config file into Notepad, but they cannot save it.
Now, if your users are Administrators, well, there's nothing you can do to stop them.
Honestly, it's a waste of time to try and protect the connection string. If they want to screw with the app and ruin their data, that's their problem.
dilkonika wrote: I know it's a string but does it have a specific structure ?
The "structure" as you put it depends entirely on the database engine you're connecting to, the client (if any) you're using and the connection technology. Go to ConnectionStrings.com for the definitive list of connection string possibilities.
|
|
|
|
|
Thank you !
ok , let's forget the first reason.
but what about the second reason , it's possible to connect to another database on another server with app.config file ?
if there's please help me with some information.
Thank you !
|
|
|
|
|
You can put a mostly configured connection string in the app.config. This "template" connection string can have replaceable tags in it to put in a server\instance name and a database name. When you need the connection string, load it (ConfigurationManager class), replace the tags with the appropriate names (it is just a string afterall) and then you can use that in your database code.
|
|
|
|
|
Thank you !
I can do that , but in this case what is the purpose of app.config file , just to keep a string that I read and I change in runtime.It's the same with the case i construct the entire connection string during runtime.
Or is better to change the replaceable tags directly to app.config file and keeping the Dbcontext unchanged without passing the connection string as parameter ? Is possible this ?
Thank you !
|
|
|
|
|
Don't change the tags in the app.config file. Users cannot change anything in Program Files, so your code will not be able to change it either.
Code always runs AS THE USER that launched it.
|
|
|
|
|
Thank you !
But my application folder isn't on Program files.
The folder is c:\MyProgram.
So in this case do you think that I can change the app.config file ?
Thank you !
|
|
|
|
|
System Admins don't like that, so if you're deploying your app in a corporate environment, I'd think twice about that.
|
|
|
|
|
No problem about this .
My question is simple : Is there a problem to change the content on app.config ? If yes this file should be treated as text file during manipulation ?
Thank you !
|
|
|
|
|
No, but it's just an XML file.
But, once you replace the tags in the app.config file, you don't have known tags to look for any more.
|
|
|
|
|
dilkonika wrote: can open it
"Can" and "do" are very different things. If they don't then it's not a problem.
You'll never get very far if all you do is follow instructions.
|
|
|
|
|
Is it possible to create an ODBC Connection for MySql Database using VB .net?
I have searched the net but could not find any information
|
|
|
|
|
can you not use the MySql Connector[^]?
Every day, thousands of innocent plants are killed by vegetarians.
Help end the violence EAT BACON
|
|
|
|
|
Absolutely. I have to use the connector but I am not sure of the code. So in case and link to some sample is available it will be of great help
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
