|
I have skimmed through those. The problem is, I can't find a problem with my program. Idk what is going on unless I haven't made a mistake and just misunderstood the professor. I just know that my program fails after many iterations and it shouldn't take many to achieve the desired result.
Thank you for your time anyways 
|
|
|
|
|
MalDrHoop wrote: The problem is, I can't find a problem with my program
You haven't asked a specific question.
You haven't posted any code.
And possibly worst of all, you used text speak.
MalDrHoop wrote: I have skimmed through those.
Apparently not well enough.
|
|
|
|
|
Actually, sir, you apparently did not read my original question. In it I asked for someone to go to where I had posted a question and check it out.
|
|
|
|
|
MalDrHoop wrote: where I had posted a question
Please point this out to me in your original post, the where part I mean. It is customary to post the code here.
|
|
|
|
|
I am new to these discussion boards. This is my first one. I thought questions were posted under the designated questions area where there is a dropdown box in the top right corner next to your username. Whenever you go to someones profile there is an option to look at their questions and answers, etc. I added a direct link.
|
|
|
|
|
|
MalDrHoop wrote: This would have been as simple as clicking on my name
No, it would have been simple if you posted the code here. Why would I click on your name, how is your name relevant to anything c or c++ related? [Edit] And you're cross posting? 
|
|
|
|
|
As I said: I am new to these discussion boards. This is my first one. I thought questions were posted under the designated questions area where there is a dropdown box in the top right corner next to your username. Whenever you go to someones profile there is an option to look at their questions and answers, etc. I added a direct link.
Apparently guidance is not something you are willing to give. Just insults. Which is something that was in the how to answer questions post if I am not mistaken. I specified that I was new to the discussion boards. my program question is way too long to post on here anyways. I was just posting on here to raise awareness of my question. That is posted in the formal questions area. I thought questions belonged in the Questions area. That is what my deduction told me.
|
|
|
|
|
MalDrHoop wrote: As I said: I am new to these discussion boards.
Then you should read http://www.codeproject.com/Messages/2922875/HOW-TO-ASK-A-QUESTION.aspx[^] rather than getting angry with someone who is merely trying to understand your original post.
MalDrHoop wrote: I was just posting on here to raise awareness of my question. That is posted in the formal questions area.
This is the formal question area. post in one place only.
Veni, vidi, abiit domum
|
|
|
|
|
I did not get angry until he started making fun of me. This is labeled discussions. The other place is labeled Questions. it made more since to place my question in questions. especially as long as it is.
Richard MacCutchan wrote: This is the formal question area. post in one place only.
I did not post my question in two places. Just asked that someone would go take a look at my question. I just stumbled upon the discussion boards today and noticed people pay more attention to it, after I had already posted my question.
|
|
|
|
|
MalDrHoop wrote: I did not get angry until he started making fun of me.
He did not make fun of you. He tried very hard to get you to explain what your problem was, which you never did.
MalDrHoop wrote: it made more since to place my question in questions.
Fine, but you did not need to start a discussion about it here; that serves only to confuse.
MalDrHoop wrote: I did not post my question in two places.
Posting a message here that points to a question elsewhere is considered the same as posting it twice.
Veni, vidi, abiit domum
|
|
|
|
|
The laughing at me smiley face, etc. Wasnt making fun? Ok.I did explain. I posted a direct link straight to my problem. I was unaware discussions were for questions too. I only posted the discussion to raise awareness of my question. I did not realize I was doing something wrong. And if you did in fact read through the whole thread you would see that I mentioned that on multiple occasions. I am new to this site and those of you who are not should just guide others and explain processes to them if they dont quite get it. Not attack them over and over again.I still don't see how posting a link to a question is posting it twice, just gives another access point. Now, please stop attacking me and go on about your business. I will not post here after this thread again for quite some time if ever. I will stick to the area labeled questions.
|
|
|
|
|
MalDrHoop wrote: The laughing at me smiley face, etc. Wasnt making fun?
No.
MalDrHoop wrote: I was unaware discussions were for questions too.
Did you read http://www.codeproject.com/Messages/2922875/HOW-TO-ASK-A-QUESTION.aspx[^]?
MalDrHoop wrote: And if you did in fact read through the whole thread you would see that I mentioned that on multiple occasions.
Not clearly.
MalDrHoop wrote: I still don't see how posting a link to a question is posting it twice
Because that is the protocol here. If you post a question in one place and then post somewhere else pointing to the question you are adding unnecessary clutter to the forums.
MalDrHoop wrote: Now, please stop attacking me and go on about your business.
No one is attacking you, we are just trying to expalin how this site works.
Veni, vidi, abiit domum
|
|
|
|
|
A laughing smiley face is making fun.
I did look over that briefly, after realizing it was at the top of the forum. My question doesn't seem suitable for a thread if you ask me. Have you seen the size of it? It contained two codes, inputs, and outputs for 100 iterations. And my deduction still would say now that posting a question so large would not be appropriate for a thread.
I did clearly say many times that I was new and unsure how to use threads after I saw that he misunderstood. His first reply seemed to me like he had looked at my program and I didn't catch otherwise till later on. I had asked if anyone could see any problems with my program and his reply was not that I can see. So I thought he had seen it and didn't find an issue.
I don't see how trying to get someone's attention directed to a question that required some much needed help was such an addition of clutter.
When you keep on my case with harshness instead of kind guidance then yes that is attacking in my book.
|
|
|
|
|
MalDrHoop wrote: A laughing smiley face is making fun
Not in this forum; it indicates that the writer is not being too serious.
MalDrHoop wrote: I don't see how trying to get someone's attention directed to a question that required some much needed help was such an addition of clutter.
Because it is an unnecessary message. All questions can be viewed by all members, and will be answered as and when someone has something useful to respond. If everyone who posted questions added messages such as you did, then the forums would be overflowing with messages that just add confusion.
MalDrHoop wrote: When you keep on my case with harshness
Is it harshness to try and explain the proper way of using these forums?
Veni, vidi, abiit domum
|
|
|
|
|
And those desired results are what?  Have you stepped through it using the debugger?
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"You can easily judge the character of a man by how he treats those who can do nothing for him." - James D. Miles
|
|
|
|
|
Hi everyone,
Right now, I am creating a project in C and at some point I am accessing, multi times during the source code, to a struct with a lot of nested structs, like this
struct1->struct2->struct3->struct4->struct5->value1
struct1->struct2->struct3->struct4->struct6->value2
What I created was a macro to clear the code:
#define ACCESS (struct1->struct2->struct3->struct4)
ACCESS->struct5->value1
ACCESS->struct6->value2
My question is: This is a good practice or a very very very bad practice?
Best regards,
Filipe Marques
|
|
|
|
|
Bad practice is using such chains of pointers. You should check if that can be avoided. If structure members can share memory locations, you should use unions.
I would use a variable instead to make the code more readable and avoid the chain:
struct4_t *struct4 = struct1->struct2->struct3->struct4;
s5val = struct4->struct5->value;
|
|
|
|
|
Thanks for your answer Jochen. I have been thinking better and maybe I will accept the Richard suggestion because the real situation is something worst
struct1->struct2->struct3->struct4[struct5->struct6->struct7]
Not pretty ah?.
Best regards
Filipe Marques
|
|
|
|
|
Very bad practice, it makes it difficult to understand or maintain the code; you should look closely at your design. You may also benefit from upgrading to C++ and using classes instead of structs.
Veni, vidi, abiit domum
|
|
|
|
|
Hi Richar, thanks for your answer. Yeah, the code is getting realy hard to maintain and each little change I do, it is a nightmare. 
Best regards
Filipe Marques
|
|
|
|
|
Not sure if some C-Compilers accept functions within a struct like in C++ Classes, but if not, you could just define a global function instead of a member function. You could then also integrate some sanity checks to make your code safer, e. g.:
Struct4* haul(Struct1* s1) {
if (s1 && s1->struct2 && s1->struct2->struct3 && s1->struct2->struct3->struct4)
return s1->struct2->struct3->struct4;
else
return 0;
}
...
Struct4* s4 = haul(struct1);
if (s4) {
s4->struct5->struct6;
...
}
Of course the question is why you need so many levels of indirection 
GOTOs are a bit like wire coat hangers: they tend to breed in the darkness, such that where there once were few, eventually there are many, and the program's architecture collapses beneath them. (Fran Poretto)
|
|
|
|
|
|
Hi Stefan. Thanks for your answer. It is very smart way to contour the problem. I think I would never figure out a solution like that  . The reason of so many levels is because the s1 is an identity with a lot of different information and I must have access to them in every function (I thought this was the best way) but I will take a chance in C++. I think in my situation will help me a lot.
Best regards
Filipe Marques
|
|
|
|
|
You appear to be facing a problem that is not related to the programming language or it's (lack of) features: when your function needs to parse a data structure of such complexity, the question arises why it needs to know about the entirety of this structure? Wouldn't it be sufficient if e. g. the caller passed struct1->struct2->struct3 to the function as an argument, so it wouldn't need to dig through the top layers to start with? If this is true, then you need to redesign the function signature so it requests only pointer(s) those parts of the data structures that it needs to access.
Or, if your function really needs to know about all parts of that data structure, then it might be doing too much in just one function, and you should consider splitting it up into multiple parts.
Or, if your function is small, and really can't be split up any further in a sensible way, then the question arises why are these data values spread so far out over different parts of the data structure? Maybe it is the data structures after all , that need to be redesigned, so that related values are stored within the same (sub-)structure!
All of this is based on the principals of "locality of concern" or "information hiding". You can google on those expressions for more information.
GOTOs are a bit like wire coat hangers: they tend to breed in the darkness, such that where there once were few, eventually there are many, and the program's architecture collapses beneath them. (Fran Poretto)
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
