ASP.NET

Rahul Rajat Singh16-Aug-12 23:35

16-Aug-12 23:35

Logic wise this code seems ok to me. But quality of code is not good. should have been done with some best practices instead of the plain old approach.

still I have 2 things:

1. You still need to get in contract with Billdesk As a merchant.
2. The original poster seems to have posted the sample code that comes with Billdesk integration document. Once you get in contract with BillDesk you will get one such document and perhaps it will contain much better sample code with few best practices followed.

Every now and then say, "What the Elephant." "What the Elephant" gives you freedom. Freedom brings opportunity. Opportunity makes your future.

ashjassi17-Aug-12 0:09

https://sec.paymentexpress.com/pxmi/apply[^]

17-Aug-12 0:09

Rahul Rajat Singh17-Aug-12 0:32

17-Aug-12 0:32

I have not done integration with this one but it should also be on the similar lines and straight forwards only.

Every now and then say, "What the Elephant." "What the Elephant" gives you freedom. Freedom brings opportunity. Opportunity makes your future.

ashjassi17-Aug-12 0:45

17-Aug-12 0:45

I have got some code regarding this.
Ok can i get ur mailid and profile so that we can be connected
Thank you sir
ashjassi

Rahul Rajat Singh17-Aug-12 19:40

17-Aug-12 19:40

ok, will send u my id in a mail not here. but i still recommend that we discuss things here. here we can get inputs from a lot of experts too. also, i keep Codeproject open more than my email so chances are that I will read message on CP before the mail.

Every now and then say, "What the Elephant." "What the Elephant" gives you freedom. Freedom brings opportunity. Opportunity makes your future.

ashjassi18-Aug-12 18:26

18-Aug-12 18:26

maail me on ashjassi@gmail.com

ashjassi17-Aug-12 0:11

17-Aug-12 0:11

I have also searched YesPayment and apply[^]

Rahul Rajat Singh17-Aug-12 0:34

17-Aug-12 0:34

Make sure that your organization is up for these integrations. You will have to talk to some management guys because there are lots of offline formalities to be done too. (not talking about this specifically, talking in general)

Every now and then say, "What the Elephant." "What the Elephant" gives you freedom. Freedom brings opportunity. Opportunity makes your future.

ashjassi17-Aug-12 1:28

http://demos.telerik.com/aspnet-ajax/webmail/[^]

17-Aug-12 1:28

jkirkerx17-Aug-12 19:27

17-Aug-12 19:27

So which one is the most popular in India?

Rahul Rajat Singh17-Aug-12 19:37

17-Aug-12 19:37

Almost all of them are used equally. But recent trends and e commerce success stories seems to portray that billdesk is the best.

Every now and then say, "What the Elephant." "What the Elephant" gives you freedom. Freedom brings opportunity. Opportunity makes your future.

jkirkerx17-Aug-12 20:43

How to create Shipment project container planning using ASP.NET

17-Aug-12 20:43

is it named value paired? or xml?

I make eCommerce software, and India sounds like a good market. Writing another gateway is easy.

SubiyaPalanisamy16-Aug-12 1:22

SubiyaPalanisamy

16-Aug-12 1:22

Good Evening..

i m doing mini project topic is Dispatch Automation(Container Planning)..
pls give the details about modules in ASP.NET and back end is Sqlserver2008

Re: How to create Shipment project container planning using ASP.NET

ashjassi16-Aug-12 1:30

Cascading dropdown selected value

16-Aug-12 1:30

ok what is your problem mail me at ashjassi@gmail.com

nitin_ion15-Aug-12 23:05

nitin_ion

15-Aug-12 23:05

I have a dropdown and a cascading dropdpwn.

They work fine. My dropdown fills according to parentid. But i also want to set the selected value of target dropdown.

ASP.NET

<td class="style1">
 <asp:DropDownList ID="drpDefaultHandler" runat="server" DataTextField="UserName" DataValueField="UserName" Width="200px" />

 <asp:DropDownList runat="server" ID="drpMill" DataTextField="MillName" DataValueField="MillName" AutoPostBack="true" />
 <ajaxToolkit:CascadingDropDown ID="csdDefaultHandler" runat="server" Category="Header" Enabled="true" TargetControlID="drpDefaultHandler" ParentControlID="drpMill" ServiceMethod="GetDefaultHandlersByMill" ServicePath="~/Services/AjaxServices.asmx" />
</td>

For this is have done autopostback=true even this is dirty but this works. however there is one issue. when changing it show [Method Error 0] in drpDefaultHandler before setting the selected value.

how can i solve this issue or is there a better solution to this.

Re: Cascading dropdown selected value

Rahul Rajat Singh16-Aug-12 18:14

maintain scrollbar position

16-Aug-12 18:14

Perhaps this link will help you implementing the cascading dropdown the right way.
AJAX for beginners (Part 2) - Using XMLHttpRequest and jQuery AJAX to implement a cascading dropdown[^]

Every now and then say, "What the Elephant." "What the Elephant" gives you freedom. Freedom brings opportunity. Opportunity makes your future.

sc steinhayse15-Aug-12 11:55

Re: maintain scrollbar position

15-Aug-12 11:55

In a C# 2010 web form application, I want to maintain the scroll bar position in Panel1 listeb below. According to the following
link: http://gnidesign.blogspot.com/2011/06/how-to-maintain-page-scroll-on-postback.html, the javascript code that I supplied below
should work. My problem is there is not a 'head' html tag for me to embed the javascript code into.

Thus can you tell me what is wrong with the Javascript code I have below? Do I have the code in the wrong postion of the *.aspx
page?
Can you tell me how to maintain the scrollbar position of panel1?

Here is the code I am referring to:

<%@ Page Title="" Language="C#" MasterPageFile="~/App.Master" AutoEventWireup="true" MaintainScrollPositionOnPostback="true"
    CodeBehind="Atts.aspx.cs" Inherits="RpcSupport.Atts" %>
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajx" %>
<asp:Content ID="Content1" ContentPlaceHolderID="PlaceHolderPageTitle" runat="server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="head" runat="server">
</asp:Content>
<asp:Content ID="Content3" ContentPlaceHolderID="TopMenu" runat="server">
</asp:Content>
<asp:Content ID="Content4" ContentPlaceHolderID="ReportForm" runat="server">
   <ajx:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" EnablePartialRendering="true">
    </ajx:ToolkitScriptManager>
    <asp:UpdatePanel ID="AttUploadUpdatePanel" runat="server">
        <ContentTemplate>  
            <table style="width: 100%;">
                <tr>
                    <td>
                        <table style="width: 50%;">
                            <tr>
                                <td width="100px" rowspan="5">
                                </td>
                            </tr>
                        </table>
                    </td>
                    <asp:Table ID="uploadAtttb" runat="server" Height="35px" HorizontalAlign="Center"
                        Width="50%">
                        <asp:TableRow ID="trTitle" runat="server" HorizontalAlign="Center">
                            <asp:TableCell ID="TableCell1" runat="server" RowSpan="1" ColumnSpan="5" VerticalAlign="Top" HorizontalAlign="Center">
                                <asp:Label ID="Label1" runat="server" CssClass="RptPageTitle" Text="Att Entry" />
                            </asp:TableCell></asp:TableRow><asp:TableRow ID="TableRow1" runat="server">
                            <asp:TableCell ID="TableCell2" runat="server" RowSpan="1" ColumnSpan="5" VerticalAlign="Top" HorizontalAlign="Center">
                                <asp:Label ID="lblResultMsg" runat="server" CssClass="msgStyle" />
                                <asp:Label ID="lblErrorMsg" runat="server" CssClass="errorStyle" />
                            </asp:TableCell></asp:TableRow><asp:TableRow ID="TableRow2" runat="server">
                            <asp:TableCell ID="TableCell3" runat="server" HorizontalAlign="Right">
                                <asp:Label ID="Lable2" runat="server" Text="Org Name" CssClass="RptFormLabel" />
                            </asp:TableCell><asp:TableCell ID="TableCell4" runat="server" HorizontalAlign="Left" AutoPostBack="true">
                                <asp:TextBox ID="txtOrgID" Visible="false" Enabled="true" runat="server" Width="100"
                                    MaxLength="10" />
                                <asp:TextBox ID="txtOrgName" runat="server" Width="250" CssClass="TextBoxStyle" OnTextChanged="FindOrg"
                                    AutoPostBack="true" MaxLength="100" /> 
                            <ajx:AutoCompleteExtender ID="AutoCompleteAtt" runat="server" CompletionListCssClass="AjaxListStyle"
                                    TargetControlID="txtOrgName" ServiceMethod="GetOrgAttList" ServicePath="Atts.aspx"
                                    MinimumPrefixLength="1" CompletionInterval="200" CompletionSetCount="50">
                                </ajx:AutoCompleteExtender>   
                            </asp:TableCell></asp:TableRow><asp:TableRow ID="TableRowa" runat="server" Visible="true">
                        </asp:TableRow>
                        <asp:TableRow ID="TableRowb" runat="server" Visible="true">
                            <asp:TableCell ID="TableCell5" runat="server" HorizontalAlign="right">
                            </asp:TableCell><asp:TableCell ID="TableCell5a" runat="server" HorizontalAlign="left">
                                <asp:Panel ID="Panel2" runat="server" CssClass="TextBoxStyle" GroupingText="Compoany Number and Name">
                                    <asp:Panel ID="Panel1" runat="server" ScrollBars="Auto" Height="130px" Width="455" 
                                        CssClass="TextBoxStyle">
                                        <asp:CheckBoxList ID="ChkBoxLstPlan" runat="server" >
                                        </asp:CheckBoxList>
                                    </asp:Panel>
                                </asp:Panel>
                            
                               <div>
                                    <asp:RequiredFieldValidator CssClass="errorStyle" ID="reqVal1" Display="Dynamic"
                                        runat="server" ControlToValidate="txtOrgName" ErrorMessage="'Organization Name' is a required field." />
                                </div>
                                
                            </asp:TableCell></asp:TableRow></asp:Table></tr></table></ContentTemplate>
                       </asp:UpdatePanel></asp:Content><asp:Content ID="Content5" ContentPlaceHolderID="ReportBody" runat="server">
<script type="text/javascript">
    window.scrollTo = function () { }
</script>
</asp:Content>
<asp:Content ID="Content6" ContentPlaceHolderID="Footer" runat="server">
</asp:Content>

jkirkerx15-Aug-12 17:44

Re: maintain scrollbar position

15-Aug-12 17:44

sc steinhayse wrote:
maintain the scroll bar position

div scroll

sc steinhayse wrote:
how-to-maintain-page-scroll-on-postback.html,

page scroll

[Action]

Your reference material is for page scroll, the entire page on the browser.

You should search for panel or div scroll, or perhaps overflow scroll

I don't know off hand how to do that, but your code won't work on a div element

[EDIT]

I was just looking at your webform, I can't see how that would even work or render into proper html.

You missing a form tag, so form events will not occur, your missing a body tag

This master page was handy, I stripped out irreverent information. But if you look closely, you'll see that a webform or even a master page, is just a html page designed for graphics and looks. You make areas or spaces that you can insert content into, called contentPlaceHolder's.

OK, so your going to tell me that your master page is very advanced, and that you inserted the proper tags in the contentPlaceHolders, and that everything is fine. There are no problems with the masterpage and webform.

Fine!

But that sample will not render or function correctly.

Now I see why you can't things to work, it's because you don't have the basic understanding of how HTML works. I would hate to be the guy that has to modify your markup.

All in all, at least you posted some markup, which is brave and good. Now you just need to step back a day, and take a lesson in HTML, and then move forward.

Notice how I don't use asp.net objects for everything, I just use regular HTML tags. You only use them when you absolutely have to. They are not worth the time to use, unless you need them in code-behind to create elements.

ASP.NET

<%@ Master Language="VB" AutoEventWireup="false" CodeFile="EN-US_Landing.master.vb" Inherits="EN_US_Landing" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"><!-- Contents of this file are Copyright 2010, iCE5Commerce.com -->

<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajax" %>


<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
<head runat="server">
    <title></title>
    <meta http-equiv="cache-control" content="no-cache" />
    <link href="/CSS/EN-US_Custom1.css" rel="stylesheet" type="text/css" />
    <link href="/CSS/EN-US_Footer.css" rel="stylesheet" type="text/css" />
    <script type="text/javascript" src="https://apis.google.com/js/plusone.js"></script>
    <asp:ContentPlaceHolder ID="HeadContent" runat="server">
    </asp:ContentPlaceHolder>
    
</head>
<body id="bodytag" runat="server" class="PageBackground">
    <form runat="server" id="frmDefault">
    <ajax:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" />
    <div id="LandingHeader_Wrapper_III" >
        <div id="DocumentBackground_Body_Black">
            <div class="DocumentBackground_Container_Black">
               <table border="0" width="980" style="width:980px;">
                    <tr>
                        <td colspan="2" style="width: 980px;">
                            <asp:ContentPlaceHolder ID="HighContent" runat="server">
                            </asp:ContentPlaceHolder>
                        </td>
                    </tr>
                </table>
                <table border="0" width="980" style="width:980px;">
                    <tr>
                        <td valign="top" style="width: 980px;">
                            <asp:ContentPlaceHolder ID="LowContent" runat="server">
                            </asp:ContentPlaceHolder>
                        </td>
                    </tr>
                </table>
           </div>
       </div>
      
       </div>    
    </form>
</body>
</html>

sc steinhayse16-Aug-12 3:46

Re: maintain scrollbar position

16-Aug-12 3:46

The web pages you are looking at are part of the company website. I am using the same master pages that the entire company is using. All the login and inheritance between the different web form pages are obtained from the master web pages.
Content place holder 4 is where all the other web pages place their unique elements items for the web page. Thus I did the same thing. is that wrong?

jkirkerx16-Aug-12 9:13

regular expression validator

16-Aug-12 9:13

As far as it being wrong, it's a matter of style, function and ease of updating.

It's just my opinion, your free to do whatever you want with your skills.

If anyone has any input on this, fell free to fire away.

sc steinhayse15-Aug-12 10:02

Re: regular expression validator

15-Aug-12 10:02

In a C# 2010 web application, I have a regular expression validator that validates if a date is in mm/dd/yyyy format. The control works fine however the message quickly appears when the user enters the date and goes away. The message also appears when the user clicks the next button. I only want the message to appear when the user clicks the 'next' button.
The following is my code:

<div>     <asp:RegularExpressionValidator ID="RegExpresValdate" runat="server" ControlToValidate="txtDate"   CssClass="errorStyle"
   ValidationExpression="^(0[1-9]|1[012])[/](0[1-9]|[12][0-9]|3[01])[/](19|20)\d\d$"
                                  ErrorMessage="Please enter date in valid format (mm/dd/yyyy).">
                                   </asp:RegularExpressionValidator>
                                 </div>

Can you tell me what I can do to have the message only display when the user clicks the next button?

Message Closed

15-Aug-12 10:24

Susan Rich

15-Aug-12 10:24

Message Closed

sc steinhayse15-Aug-12 11:57