|
|
Anyone pls help with this problem, i built an asp page and uplaoaded it but i'm getting the following error:
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
And also:
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
Pls help.
Thnx
|
|
|
|
|
fire_hawk wrote: i built an asp page and uplaoaded it but i'm getting the following error:
And the error would be...?
Why is common sense not common?
Never argue with an idiot. They will drag you down to their level where they are an expert.
Sometimes it takes a lot of work to be lazy
Please stand in front of my pistol, smile and wait for the flash - JSOP 2012
|
|
|
|
|
Bro,
i'm getting a runtime error and i modified the code just as the error message said, but still did not solve the problem
|
|
|
|
|
Wouldn't it a good idea to tell us what the error is, instead of pasting what you think the solution is?
What you posted is Microsoft's way of saying, if you want to see the error, then adjust your web config file to look like this. Then we will show you the error.
So do that, get the error and post it again.
|
|
|
|
|
Okay br0,
thnx for the response, the confusing thing there is i've modified the code but it's still showing the same error, i'm confused here br0.
pls if there's anything u can advise me to do because i'm new to ASP.Net, pls help.
thnx.
|
|
|
|
|
There is a file in your project called web, which is a xml file. You have to edit the file element customErrors to mode = "RemoteOnly" like below, on your production web server.
<customErrors mode="RemoteOnly" />
After you edit the file, run the page again, and you will get a detailed error message explaining what error was detected, and then you can begin the process of fixing it.
It's done this way on purpose, so customers can't see your errors.
Or you can look in the event viewer of the server the website is on, and it will tell you what the error is.
|
|
|
|
|
Pls, my connectionstring, tell me how if it's correct like this:
<add name="AliConnectionString1" connectionString="Data Source=123appsoft.com\\biodux;Initial Catalog=Ali;Integrated Security=True"
providerName="System.Data.SqlClient" />
i'm suspecting my connection string pls help.
Thnx.
|
|
|
|
|
fire_hawk wrote: "Data Source=123appsoft.com\\biodux;Initial Catalog=Ali;Integrated Security=True"
providerName="System.Data.SqlClient"
Your connection string is off
Data Source is ServerName\Instance, so if your running sql server express, it would be, I guessing Data Source = biodux\sqlexpress
"Data Source=biodux/sqlexpress; Initial Catalog=Ali; Integrated Security=True;"
Give that a try, but research the name of the sql server and the instance
|
|
|
|
|
set the custom errors mode to Off and you would get a detailed error message that will help you to figure what the exception is.
Help people,so poeple can help you.
|
|
|
|
|
Set it like ,
<customerrors mode="On" .....
it="" will="" show="" the="" exact="" error="" is="" application.
<div="" class="signature">- Happy Coding -
Vishal Vashishta
|
|
|
|
|
Newbie at .net programming. Laptop started having registry errors with every update. Re-imaged laptop. Copied database from production (source control used). Copied programs from laptop before reimage and reinstalled. Can't save SQL 2008 module to laptop and access from solution on .net. Trying to make reports. On .net side when I try to make a dataset and connect to stored procedure, I can't. I looked up about removing source control (Tools, Options on .net). Am still getting lower left screen references to source control and red X. Do all of the programs and solution parts need to be removed from source control before this will work? Tried to explain to boss was still having source control problems. Said I shouldn't be trying to do anything with source control. Removed Seapine source control from control panel. Still having issues. Is there a way to check everything out from source control? I cannot make a stored procedure and make dataset for it on .net side. Help!!
Graciegram
|
|
|
|
|
I suggest you use use the community forum at Seapine, or purchase the support package from them. They would better serve your computer installation issues.
Seapine[^]
|
|
|
|
|
Member 7786203 wrote: way to check everything out from source control?
Yes
Member 7786203 wrote: I cannot make a stored procedure and make dataset for it
This has nothing to do with source control and there is no mention of why you think that you are unable to create a stored procedure.
Member 7786203 wrote: connect to stored procedure, I can't
Not at all helpful or descriptive of any kind of problem.
Member 7786203 wrote: Am still getting lower left screen references to source control and red X
Which means absolutely nothing to anyone reading your rant.
Member 7786203 wrote: Do all of the programs and solution parts need to be removed from source control before this will work?
Something else that means absolutely nothing to anyone but you. Before what will work?
Member 7786203 wrote: Trying to make reports
"Trying" implies that you actually attempted something but nothing in your "question" mentions any kind of problem with reports so why do you even mention it?
Member 7786203 wrote: Help!!
With what? You have not defined any of the alleged problems that you are having. We cannot see your screen, read your mind or open up any of the files on your hard drive. The only thing we can know is that you claim that you are having problems without knowing what exactly those problems are. No errors, no exceptions, no code describing what you have done.
Member 7786203 wrote: Can't save SQL 2008 module to laptop and access from solution on .net
Again means nothing.
Why is common sense not common?
Never argue with an idiot. They will drag you down to their level where they are an expert.
Sometimes it takes a lot of work to be lazy
Please stand in front of my pistol, smile and wait for the flash - JSOP 2012
|
|
|
|
|
oh touche, that was a direct hit. I wanted to say that but I held back. I'm not sure how far I can push it here on the Code Project, and what the limits are.
I use to use the asp.net forum, and if you say just something slightly offending, they delete your post. It's like walking on egg shells over there. Pure PC and totally out of control.
There sure seems to be a flood recently of scattered minds looking for people to do research for them here on the Code Project. I guess the secrets out, and perhaps a line needs to be drawn in the sand between code slavery and actual real help.
FYI:
The majority of post on this discussion can be Googled, and an answer can be obtained in as little as 30 seconds.
Good for you, oh that string to byte question, I thought I would just let the poster simmer for awhile on that one. I can't believe you gave him the answer.
jkirkerx
|
|
|
|
|
jkirkerx wrote: There sure seems to be a flood recently of scattered minds looking for people to do research for them
That is pretty much 24/7. It is no coincidence that these types of questions start popping when a certain part of the world is in their daylight hours.
jkirkerx wrote: can be Googled
Yep... and those are the ones that get the bare minimal amount of help. IF they post something that stick to the guidelines showing that they have actually tried something, they get the real help. There is one guy in the QA section right now that has no idea what he is doing. He posts the same question over and over and pretty much his only response to answers is "it don't work". But it's very clear that he doesn't know anything about programming and refuses to try understand any of the answers. If he can't copy/paste code into his homework then he is off to post another repost.
jkirkerx wrote: you gave him the answer
Sometimes the functions that they need to use are not immediately obvious. So I gave him the benefit of a doubt.
Why is common sense not common?
Never argue with an idiot. They will drag you down to their level where they are an expert.
Sometimes it takes a lot of work to be lazy
Please stand in front of my pistol, smile and wait for the flash - JSOP 2012
|
|
|
|
|
Those are some good guidelines for me to follow. I didn't think of it like that.
I like the daylight reference.
|
|
|
|
|
Hi,
I have an asp.net application, I have some text (or string) which I want to convert in to byte array.
which is the best performance oriented approach.
Please give me your advice or any link would be greatly helpfull.
Thanks in advance.
Thanks & Regards,
Abdul Aleem Mohammad
St Louis MO - USA
|
|
|
|
|
indian143 wrote: I want to convert in to byte array
GetBytes(yourString);
Why is common sense not common?
Never argue with an idiot. They will drag you down to their level where they are an expert.
Sometimes it takes a lot of work to be lazy
Please stand in front of my pistol, smile and wait for the flash - JSOP 2012
|
|
|
|
|
And where are the implementation of GetBytes?? 
|
|
|
|
|
System.Text.Encoding.GetBytes()
"It's not what you don't know that will hurt you the most, it's what you think you know that isn't so." - Unknown
|
|
|
|
|
System.Text.ASCIIEncoding encoding=new System.Text.ASCIIEncoding();
Byte[] bytes = encoding.GetBytes(yourString);
- Happy Coding -
Vishal Vashishta
|
|
|
|
|
Please guy I need a source code for ayo (the african board game) for my project
|
|
|
|
|
|
How we can show overlapping form in asp.net
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
