|
I hate to admit that I still don't fully understand what happens when it comes to .NET versioning.
If I want to use an Infragistics control that was compiled against the 2.0 framework, in a 4.0 project, does this cause a mix of 2.0 and 4.0 objects in the same runtime environment?
For instance, if the 2.0 control creates a new Rectangle object, is that a version 2.0 Rectangle, while my 4.0 code would be creating version 4.0 Rectangles?
Or does all the code in the process run against version 4.0 objects?
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
2.0 code would know nothing about the 4.0 code so it could only create its own version. Only one version of an assembly can be loaded into the appdomian at a time so objects created will be from that version. However, it does get a bit tricky if you use codeBase[^] or assembly rediection[^]
No comment
|
|
|
|
|
Thanks, that helps. I take note that only one version of an assembly can be loaded at a time, so that means that the 2.0 assembly will be using objects from the 4.0 version of the .NET framework.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
Have a look at the modules window in the debugger. That'll tell you all the assembles that are loaded and their version.
Regards,
Rob Philpott.
|
|
|
|
|
K, I am relatively new to sockets so bear with me.
I have an experimental Client/Server socket application I am developing to replace an existing
legacy DCOM Client/Server architecture.
What i am trying to do is replicate the class interface of the legacy DCOM client classes in the TCP Socket client classes.
For instance
DCOM Client Call Signature:
Call on the client class to retrieve an array of information from the DCOM server.
int returnValue = client.GetArray(int arrayID, ref object values)
This client also receives updates from the server at regular intervals.
So my problem is with the new TCP Socket based class.
I have a thread within the client class that is listening for updates from the server.
Now I send a byte[] based call to the TCP server which returns a byte[] containing 2 integers and an array in this order: ResultOfCall(4 bytes) ArrayBytesLength(4 bytes) ArrayBytes(? bytes)
byte[] callSignature = GetSomeCallSignature(parameters);<br />
mySocket.Send(callSignature);<br />
<br />
byte[] returnVal = new byte[4]<br />
mySocket.Receive(returnVal,4,0);<br />
int retVal = BitConverter.ToInt32(returnVal);<br />
<br />
returnVal = new byte[4]<br />
mySocket.Receive(returnVal,4,0);<br />
int arrayLength = BitConverter.ToInt32(returnVal);<br />
<br />
byte[] arrayBytes = new byte[arrayLength];<br />
mySocket.Receive(arrayBytes,arrayLength,0);<br />
<br />
object arrayValue = this.ConvertToArray(arrayBytes);
My problem is that the thread that is constantly checking for updates will read everything past the first receive(receive the function return value) and the program will lock up on the second receive
(i.e. receive the array bytes length). My question, is it only feasible to have two socket connections to the server class for each client? One for executing commands against the server and one for listening for events from the server. There really is no way to tell how many clients will be connected to the server, doesn't this open up a can of worms?
"All of us who served in one war or another know very well that all wars are the glory and the agony of the young."
Gerald Ford
|
|
|
|
|
Hi, as i always say; it's software, anything is possible. First of all, depending on the Listen of the server you can connect as much clients as you need.
Second; would you really want to have it that way? If the other channel is only for a event so once and a while you could also use UDP for that, not that it really makes a difference but if you could broadcast the events the client would not need to bother about connecting to the server.
Next issue is naturally what you're sending /receiving. Make your life easier and build yourself a proper protocol where each packet at least contains the protocol version (certainly for UDP) or when connecting first exchange protocol versions.
Next about receiving data, there are several ways to do this and so far it seems that you have used the blocking way; you can also handle the receive in a async way, that frees the system to do other interesting stuff.
I think i gave you a lot to chew on but these are things you will need to consider sooner or later.
Let me know if you like more detailed info and i'll see what i can cook up for you.
Regards, AT
Cogito ergo sum
|
|
|
|
|
Sautin.net wrote: There really is no way to tell how many clients will be connected to the server, doesn't this open up a can of worms?
The Server has a thread call it A. Thread A accepts connections (creates a connection) specifically for that client.
The server then spins up a thread to deal with the connection, only that connection. So a new thread exists for each connection.
Thread A on the server then goes back to waiting for a connection.
So when client X does a connection the following happens.
1. Server opens accepting port.
2. Thread A gets a connection call on port and that creates connection X.
3. Server creates thread 1 and passes X to it.
4. Thread A goes back to listening for connections.
5. Thread 1 listens for input (your callSignature) using X.
6. Thread 1 gets msg and then sends response (bytes) on X.
7. Thread 1 can stop or go back to step 5.
|
|
|
|
|
Hi,
When you want send and receive data from multiple sockets just using threading concept to connect socket when send data then you make thread sleep for receiving data. then make thread sleep for sending data.
|
|
|
|
|
You are making a common mistake in assuming that the 4 bytes you want for your header information will always be received together. This will be the case 99% of the time, but it's not guaranteed, and on a busy stream you may well get partial messages, which will send your whole receive logic out of line (i.e. if the calls to socket.Receive only get 3 bytes).
Receive will block until the data is available. Are you sure your server is actually sending (8+arrayLength) bytes?
I recommend you build your solution on top of an existing message-based TCP protocol like the one in my article[^], if you need the two way connectivity and don't feel like configuring WCF to do what you want. I think I saw another article that does something similar but allows you to send complex types, but I don't have a link to that handy.
|
|
|
|
|
I solved my problem, thanks for you replies. 
"All of us who served in one war or another know very well that all wars are the glory and the agony of the young."
Gerald Ford
|
|
|
|
|
Hi,
I am brand new to printing to a thermal printer using c# asp.net, and i need your help guys to give me where can i find tutorial
how can i connect and print to thermal printer using c#.
i am using VS 2008 PRO .NET 3.5
please help me to get started with thermal printing using c#
I am stuck here.
I have never failed,I just found 1000 ways that never works.
Regards,
Victory.
|
|
|
|
|
If the printer supports IP/network(and it should) then I don't see the problem.
Simply send the byte[] to the printer's IP.(yeah a static IP is needed for this).
Usually the industrial/thermal printers come with a predefined header/logo file.
All you need to do is send it plus the other label info.
I/we can't possibly know how to help you on a specific printer label type.
All the best,
Dan
|
|
|
|
|
thnx dan,
i already tried that way.but of no use.
I want to print in the Bill/Invoice format. Can you help me about this?
I have never failed,I just found 1000 ways that never works.
Regards,
Victory.
|
|
|
|
|
Sorry but I don't think I can help because:
- I don't know the format of the label
- I don't know the type and protocol of the printer
Here's how I did/do it(regardless of winapp/webapp):
- Read the printer label format in a byte[] from a stream.
- Add the actual label(s) info such as PN, Qty, Batch ... according to the label specs
- Send the resulting byte[] to the printer IP
Even when using serial Connection from windows app I use the same technique(send the file/byte to the serial port).
Other possiblities:
- Use a printServer and add the thermal printer to the print server.(never did it)
- Connect the printer to USB.(only did it on win app)
All the best,
Dan
|
|
|
|
|
Thanx Don,
It will definitely help me..
I have never failed,I just found 1000 ways that never works.
Regards,
Victory.
|
|
|
|
|
Hi,
I have been trying to use either json or xml.
My program will request the server for some details.
The response will either be json or xml according to the simplicity of either of it.
I am using plain xml and no schema or cdata and so on...
Just simple...
I want a simple parser like php's simple dom parser...
or any other alternatives would be nice...
suggestions ???
|
|
|
|
|
XmlReader[^] perhaps?
Unrequited desire is character building. OriginalGriff
I'm sitting here giving you a standing ovation - Len Goodman
|
|
|
|
|
I want to remote server and client with connection.What should I do?
|
|
|
|
|
I want a nap. What should I do?
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass." - Dale Earnhardt, 1997
|
|
|
|
|
Have one!
|
|
|
|
|
I want a stiff drink today, but it's only 9:15am. A couple of those and I'll be taking the nap for you.
I wasn't, now I am, then I won't be anymore.
|
|
|
|
|
Learn about the different types of remoting: sockets, WCF etc. A few minutes with Google will lead you to the answers.
Unrequited desire is character building. OriginalGriff
I'm sitting here giving you a standing ovation - Len Goodman
|
|
|
|
|
Richard MacCutchan wrote: A few minutes with Google will lead you to the answers.
Meh, he won't be able to make a decision with that.
So, please point him to the decision making engine. 
All the best,
Dan
|
|
|
|
|
Hi,
I am having visual studio 2005 .net version 2.0
I want to use json.
I want to convert a json string to an object
how to do that?
Besides... in other new versions why it is so complicated doing that... or too many lines of code... ?
why isn't like PHP where just one function does all the magic?
http://vikku.info/ Today's Beautiful Moments are
Tomorrow's Beautiful Memories
|
|
|
|
|
Did you bother to search? This article[^] was about the third hit doing a search for exactly your post title.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
