|
jschell wrote: b. Read one byte
You want to read the FIFO taking out as many bytes at a time as you can. It is only for special control characters that you need to read individual bytes, such as DTR RTS CTS etc etc etc and you set those in the 'wait on mask'.
==============================
Nothing to say.
modified on Tuesday, September 13, 2011 3:16 AM
|
|
|
|
|
Few months back I was having the same issue of Microsecond. Windows does not provide granularity of 1 microsecond. For this reason we have used Real Time OS which is an extension to Microsoft Windows . The Timer granularity is well handled by RTOS ( provides upto 1 Microsecond , which can further modified by modifying the value of 'Ticks' of clock using some API of that RTOS.
|
|
|
|
|
you have any articles or sample programs?and Can I ask articles or sample program?
|
|
|
|
|
Fat__Eric wrote: You want to read the FIFO taking out as many bytes at a time as you can
I presume my answer wasn't clear.
If you block on a read and there is in fact data available then you do not block. So many bytes are read.
And a serial port is a single byte stream. So excluding an intermediate buffer mechanism it is only going to read one byte at a time.
But if the API supports a buffered read then using that is certainly an option.
|
|
|
|
|
okey, thanks
do you have sample program?
modified on Wednesday, September 14, 2011 1:17 AM
|
|
|
|
|
jschell wrote: And a serial port is a single byte stream. So
Very very few are. As stated a single byte rcv buffer UART is a very shonky piece of hardware. The stock (what is it, 82530 or some such compatible UART on most PCs) has an 8 byte RX FIFO.
Better quality UARTs on serial PCI cards will have far bigger FIFOs.
==============================
Nothing to say.
|
|
|
|
|
|
okey... thank's. i will try your suggest...
|
|
|
|
|
Hi,
It's been a while since I've posted in here.
A friend and I have a problem with MFC,
We're trying to get the handle of a PictureBox in MFC,
but the code we use keeps returning null.
Here is a code snippet we're using
CStatic* pCStatic = (CStatic*) GetDlgItem(IDC_STATIC1);
HWND hWnd = pCStatic->m_hWnd;
We're trying to get the handle of the PictureBox so we put a DirectX into the control.
Many Thanks
Tom
|
|
|
|
|
Tom,
Make sure that you are calling GetDlgItem(int) from the parent window of the CStatic because the MFC wrapper auto-populates the first HWND parameter with this->m_hWnd. You could also use the global namespace function ::GetDlgItem(HWND,int) if you want to call this function from outside the window class.
I would actually recommend that you avoid using GetDlgItem and instead use a control variable. In some cases the GetDlgItem function will return a pointer to a CTempWnd object. Another reason to void GetDlgItem is because of performance reasons... GetDlgItem causes the MFC framework to iterate through an internal handle map in an attempt at finding a permanent object. In some projects this map could contain several hundred or more handles. So if an engineer is using a function such as GetDlgItem from WM_PAINT handler or perhaps WM_TIMER they could potentially be iterating needlessly through this map dozens of times per second or more.
Best Wishes,
-David Delaune
|
|
|
|
|
hi,everyone.
When using the Windows FileOpen dialog with multiple selection do you ever wonder how much memory you have to allocate for the buffer. Is one kilobyte going to be enough? Or should you make it ten? How about one Megabyte just to be safe?
It seems that no matter what you choose, you are either going to waste a whole bunch of memory just to be safe, or your user is going to select a bunch of files only to find their selection didn't work because your buffer was too small.
one way is Derive the CFileDialog class , the article as follow introduce it:
Multiple Selection in a File Dialog
but I have the other method: use the hook function of CFileDialog. I write some code as follow:
UINT_PTR CALLBACK MyOFNHookProc( HWND hdlg, UINT uiMsg, WPARAM wParam, LPARAM lParam )
{
int nResult = FALSE;
if (hdlg == NULL)
return 0;
#ifdef _DEBUG
_AFX_THREAD_STATE* pThreadState = AfxGetThreadState();
if (pThreadState->m_pAlternateWndInit != NULL)
pThreadState->m_pAlternateWndInit = NULL;
#endif
switch(uiMsg)
{
case WM_NOTIFY:
{
LPOFNOTIFY pOfn = (LPOFNOTIFY)lParam;
switch(pOfn->hdr.code)
{
case CDN_SELCHANGE:
{
TCHAR dummy_buffer;
HWND hOwner = GetParent(hdlg);
HWND hParent = GetParent(hOwner);
UINT nfiles = CommDlg_OpenSave_GetSpec(hOwner, &dummy_buffer, 1);
int cbLength = CommDlg_OpenSave_GetSpec(GetParent(hdlg), NULL, 0);
cbLength += _MAX_PATH;
if(cbLength>(pOfn->lpOFN)->nMaxFile)
{
if((pOfn->lpOFN)->lpstrFile)
HeapFree(GetProcessHeap(),
0,
(pOfn->lpOFN)->lpstrFile);
(pOfn->lpOFN)->lpstrFile = (LPTSTR) HeapAlloc(GetProcessHeap(),
HEAP_ZERO_MEMORY,
cbLength);
(pOfn->lpOFN)->nMaxFile = cbLength;
}
nResult = TRUE;
break;
}
default:
break;
}
break;
}
default:
break;
}
return nResult;
}
void CMultiSelectDlg::OnButton1()
{
#define NAMEBUF 1024
TCHAR szFilters[]= _T("MyType Files (*.doc)|*.doc||");
CFileDialog fileDlg(TRUE, _T("doc"), _T("*.doc"),
OFN_FILEMUSTEXIST | OFN_HIDEREADONLY|OFN_ALLOWMULTISELECT, szFilters);
fileDlg.m_ofn.lpstrFile= (LPTSTR) HeapAlloc(GetProcessHeap(),
HEAP_ZERO_MEMORY,
NAMEBUF);
fileDlg.m_ofn.nMaxFile = NAMEBUF; fileDlg.m_ofn.lpfnHook = (LPOFNHOOKPROC)MyOFNHookProc;
INT_PTR ret = fileDlg.DoModal();
if (ret == IDOK)
{
int width = 0;
CString str;
CDC *pDC = m_listbox.GetDC();
int saved = pDC->SaveDC();
pDC->SelectObject(GetFont());
UINT count = 0;
POSITION pos = fileDlg.GetStartPosition();
while (pos)
{
str = fileDlg.GetNextPathName(pos);
m_listbox.AddString(str);
CSize size(0, 0);
size = pDC->GetTextExtent(str);
width = width > size.cx ? width : size.cx;
++count;
}
pDC->RestoreDC(saved);
ReleaseDC(pDC);
m_listbox.SetHorizontalExtent(width + 5);
str.Format(_T("%u files selected"), count);
m_static.SetWindowText(str);
}
DWORD dwCode = CommDlgExtendedError();
if (FNERR_BUFFERTOOSMALL==dwCode)
{
int i =0;
}
HeapFree(GetProcessHeap(),0,
(fileDlg.m_ofn.lpstrFile));
}
the code Reference the article as follow :
How To Handle FNERR_BUFFERTOOSMALL in Windows
but I found when the file names buffer is enough large , it run successly; but when when the file names buffer is not enough large (it means the program will enter if(cbLength>(pOfn->lpOFN)->nMaxFile) ), when after run INT_PTR ret = fileDlg.DoModal(); the value of ret is IDCANCEL. I catch the error code, it is FNERR_BUFFERTOOSMALL . In the end even I allocate a enough large memory ,the error code still is FNERR_BUFFERTOOSMALL . Why???
|
|
|
|
|
Well, for most application, if your buffer is something like 10 KB, then it would be a good compromise as it is not much memory on today computers and it would allows few hundreds of files to be selected with relatively long names.
In some very rare case, it might be usefull to be almost "illimited"...
Philippe Mori
|
|
|
|
|
I need to embed a logo on a live video stream. Where to start? where to end? thanks for the bullets.
|
|
|
|
|
Smith# wrote: Where to start?
Here[^] would be a good place.
|
|
|
|
|
if you're using windows and dshow, this is quite easy to do with an in-place transform filter; I've used it to put timecode and DOGs on video
|
|
|
|
|
I'm having some problems with my rather old codebase in VS2010 again. I have a MDI program where the child windows have a tabbed layout; This worked nicely up to VS2008, but in VS2010 the background of the tab bar is broken, see here. Any idea what could be causing this? Note that the tab bar looks perfectly OK when using the Win2k theme in Win7, it only looks like this with Aero enabled.
Somehow I think it could be related to the fact that the child windows are using a splitter pane with a top and a bottom pane, but the upper pane appears to be a CDialog - I have been told that this should actually not be possible at all, but somehow the previous developer of this app got it to work...
|
|
|
|
|
It looks like your tab control is inside an MDI window? If so, then the horizontal scrollbar is likely from the MDI window. With Aero enabled, controls and windows, and window components may have different sizes. You may have hard-coded some of these items.
In any case, the reason for the horizontal scroll bar is because the tab control is bigger than it's container (CDialog or MDI window).
If your actions inspire others to dream more, learn more, do more and become more, you are a leader." - John Quincy Adams
You must accept one of two basic premises: Either we are alone in the universe, or we are not alone in the universe. And either way, the implications are staggering” - Wernher von Braun
|
|
|
|
|
Sorry if it was not obvious from the screenshot, but both the dark grey area as well as the scroll bar are pixel garbage which is shown instead of the default background colour. The scrollbar that you can see in the screenset becomes visible after minimizing the MDI child window at exactly the same position where previously a "real" scrollbar was.
|
|
|
|
|
Hi Developers,
I want to create a pointer of mainframe in application class.
I have tried CMainFrame* m_pMainFrame; in Application class declaration.
Mainfrm.h has included via stdafx.h, but compiler can't recognized mainframe class.
How it's possible.
Thanks in Advance.
Amrit Agrawal
Software Developer.
|
|
|
|
|
Could it be that you also included your application's header in stdafx.h before MainFrm.h? But if all you do in your app's header is to declare a pointer to your mainframe then a simple forward declaration would do, would it not?
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> If it doesn't matter, it's antimatter.<
|
|
|
|
|
Hi Developers,
I am using a list control, in which i have to display a menu on the right click, if i have clicked other than column header. I have used HitTest and based on the retrieved flags I have try this.
Here m_SymList is List Control.
UINT uFlags;
m_SymList.ScreenToClient( &point );
int iIndex = m_SymList.HitTest( point, &uFlags);
if( uFlags & LVHT_ONITEMICON )
{
if( iIndex != -1 )
CreateUserClipBoardMenu( point );
}
Every time If i right click in header, it give a iIndex > 0.
as well as the ccondition if( uFlags & LVHT_ONITEMICON ) is also getting satisfied.
Can anyone help me to solve this issue.
Thanks.
Amrit Agrawal
|
|
|
|
|
Are you handling the HDN_ITEMCLICK notification?
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"Some people are making such thorough preparation for rainy days that they aren't enjoying today's sunshine." - William Feather
|
|
|
|
|
You could also catch the reflection of LVN_COLUMNCLICK
ON_NOTIFY_REFLECT(LVN_COLUMNCLICK, OnLvnColumnClick)
modified on Thursday, September 8, 2011 9:59 PM
|
|
|
|
|
wchar_t wch = 26342 ; // 26342 is a chinese character
wcout << wch ; // prints nothing
wout.imbue( locale("chinese-simplified" ) ) ;
wcout << wch ; // okay, prints '曦'
cout << '曦' ; //okay, as to cout,without having to set the locale, I can freely output chinese character ? why?
Second question is why setting up locale("chinese-simplified") for wcout that makes chinese character visible? Does the locale provide the font which supports the apprearance of our character?
Another question that confused me long is why can font like "Times New Roman" be used to display our ideograph? It's only 374k in size,which is simply uanble to represent 7000+ pictographs
modified on Thursday, September 8, 2011 10:54 AM
|
|
|
|
|
Hi,
I am diaplying some string using space as delimeter. It as coming aligned in notepad but not in
CRichEditCtrl . Shell I need to set any property for that?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
![Beer | [beer]](https://www.codeproject.com/script/Forums/Images/beer.gif)
