|
Very true indeed! I was not aware of them (or perhaps I am, but not of the name). However, I'm not the SQL expert 
It's an OO world.
|
|
|
|
|
Parameterized queries are safe in this context!
Well there are those 'Xperts' and 'Seniors! everywhere  Try this[^]
|
|
|
|
|
I don't know - it isn't in my code anymore...
I wrote this wonder this morning, and realized I could prune it down to just the one line:
private void SetRole(SMUser user, UserRole userRole, string roleName, List<string> inRoles, List<string> outRoles)
{
(((user.Roles & userRole) != 0) ? inRoles : outRoles).Add(roleName);
}
I mean, yes it works. But...
It's not there anymore: I changed the whole way I handle roles for other reasons. But still, It's a bit impenetrable...
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
Manfred R. Bihy: "Looks as if OP is learning resistant."
|
|
|
|
|
In my opinion, it's a nice piece of code, you should take it to the 'Clever code' forum. Readability is a problem though.
|
|
|
|
|
It's the readability I don't like at all - that is not clever, it's just downright nasty!
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
Manfred R. Bihy: "Looks as if OP is learning resistant."
|
|
|
|
|
I wouldn't qualify it as horror. It's just a little bit too clever.
With a good comment to explain it quickly, or a more explicit method name, it would be fine by me.
'As programmers go, I'm fairly social. Which still means I'm a borderline sociopath by normal standards.' Jeff Atwood
|
|
|
|
|
I have to agree its not really horrible; as long as it is well commented it is ok.
Just because the code works, it doesn't mean that it is good code.
|
|
|
|
|
If you feel the need to comment the code,then the code is a horror.
Good code shouldn't be dependent on comments to tell the system story.
Or at least that is my 2 cents
That said, this isn't a big horror, it clearly states what it does, 3 nitpick is the use of prefix in the SMUser class name, and that the name of the method is somewhat misleading, and that the method does two things that a) should be clearly specified in the method naming or b) refactored into two separate methods.
modified on Tuesday, August 30, 2011 6:21 AM
|
|
|
|
|
annathor wrote: If you feel the need to comment the code,then the code is a horror.
Surely you don't mean that commenting code makes any code a horror..?
|
|
|
|
|
No, not always, there are some rare cases where cluttering the code with comments are justified.
But if you look at some code and thinks "gosh I better comment it, so other people understands it" then it is an indication that the code is a horror, why do you need to explain the system whit a language that is not designed to describe a system, when you allready have described it with a language that is designed to excplain a system?
Wouldn't it be better to left click, refactor->rename and clean up the code so it tells the story you want it to tell, insted of trying to excplain the story by including a secondary language into your source files?
also comments tends to become misleading and/or misplaced as the system evolves, so instead of excplaining the system it just adds to the confusion.
so, hyperboled, I say, a well commented code is a indication that the system is dirty.
and commenting in itself can also make clean code dirty by breaking up the logic and lie to you while you read the code.
In most cases you could explain what the sysem is supposed to do better whit a programming language than whit english or swahili. And if you, god forbid, uses comments to add todos, changelogs or similar there are plenty of good tools out there for that.
|
|
|
|
|
Comments are beyond important.
As a simple proof, using your IDE of choice, check the intelisense for a command, where does that come from? Comments.
During development, it's a good idea to free-form what a class/variable/method is for, but how? Comments.
Write down what you intended to happen, where you intend it to be, how? Comments?
In short, comments should describe, in the natural language of the developers what the code is doing in the machine language. Simples.
Panic, Chaos, Destruction. My work here is done.
Drink. Get drunk. Fall over - P O'H
OK, I will win to day or my name isn't Ethel Crudacre! - DD Ethel Crudacre
I cannot live by bread alone. Bacon and ketchup are needed as well. - Trollslayer
Have a bit more patience with newbies. Of course some of them act dumb - they're often *students*, for heaven's sake - Terry Pratchett
|
|
|
|
|
I say you're just mostly wrong about that.
Often it's as important, if not more so, to know WHY something is coded like it is as to see the code itself. Comments should tie the parts together and provide a concise lead-in to the code itself. Not to say that logical procedure and variable naming isn't a huge help, but good comments can make big difference.
Of course the unfortunate thing is usually that bad code is accompanied by bad or no comments.
|
|
|
|
|
I agree with you in principle: the code should be readable, so comments, or at least those which simply describe what is being done, should be unnecessary. However, we need comments for two reasons:
- To cover why we are doing it. For simple cases this might be obvious from a function name, but even for trivial calculations, describing why you're doing it is useful. For example, which of these is clearer?
surfaceVolume = volume * 298 * p / (T * 101325);
or
surfaceVolume = volume * 298 * p / (T * 101325);
(Yeah I know I should have consts for those values and in similar real code I do.)
- Sometimes the language feature won't let us express our thought without a bunch of syntax. In a procedural scalar language like what most of us use, this is particularly true for array operations. E.g.
double[] r = new double[a.Length];
for(int i = 0; i < r.Length; i++) r[i] = a + b;
Experienced people might be able to read a loop and immediately process it to what it represents, but many won't be able to. Linq helps with certain categories of syntax (complex foreach loops to filter an enumeration), but array-based maths still needs comments for what you really mean.
|
|
|
|
|
surfaceVolume = volume * 298 * p / (T * 101325);
Or even better...put that formula in a well named function and call it, so your call looks something like
surfaceVolume = CalculateVolumeByIdealGasLaw(volume, pressure, temperature);
Now you don't need the comment. And your code is easier to test.
|
|
|
|
|
Up to a point. Code which contains nothing but several levels of 'well named functions' wrapped around a simple arithmetic calculation are a pain to debug (trying to actually find the places where calculations are done and therefore being able to see whether they're done right). It's kind of like trying to read a book by just looking at the contents page. It's hard to read such long names, too (unless you put in underscores to make it look like a sentence but then the arguments seem to be bound to the last word).
This would go in a function for me if I were using it in more than one place (which in this example I almost certainly would be).
Your proposed name misses the most important point, by the way. It should be called "STPVolume" or "GetVolumeAtSTP" or something like that.
|
|
|
|
|
You think debugging is more difficult with more functions? I disagree. My IDE steps into functions, or over them...which makes debugging simpler, not harder. I can step over functions I've already eliminated as the problem, and into those which could be an issue. Rather than stepping on every line of code.
And I should know if the bug is in a function or not by writing tests for it. My "STPVolume" or "GetVolumeAtSTP" function should have test methods ensuring it's accurate.
As for the name, physics isn't my domain, so I didn't know the proper name, I made my best guess. The essence of my point still stands.
|
|
|
|
|
Yes. IDE stepping is the last resort of debugging, one should be able to find the suspect piece of code quickly without diving through a big tree of methods. (I'm suffering from this at the moment in a real project, in fact.) Obviously, you don't just want the whole application in one big main(), but taking something which is only one or two lines out of line does not (imo) help readability. (Taking it out to avoid duplicating the calculation is a separate matter and a good reason to do so, because the pain of having duplicate code massively outweighs the problem of having too many functions.)
Your tests will tell you if the function is 'accurate', but it won't tell you some things which may be important when you want to use it (that you didn't think of at the time). For example, just what is standard temperature and pressure? ... there are different definitions and to find which one is being used you need to find the calculation. This is more common with more complex methods, or order of event firing or other slightly tricky things like that.
|
|
|
|
|
I've never heard of "the problem of having too many functions"...
Have you read books like Clean Code or Code Complete, etc?
|
|
|
|
|
No ... I'd like to get hold of Clean Code, I've heard good things about it. Like all philosophies, though, the idea of making things 'cleaner' by putting things into subfunctions can be taken too far.
|
|
|
|
|
@annathor
I mean no disrespect but you are %100 wrong about good code not needing comments. It is this kind of mindset, that everyone thinks exactly alike, that leads to so many re-writes and problems. I used to work for a software company that employed many developers who had this same approach to commenting anything development related and it lead to numerous hours of unnecessary support simply because the developer assumed that the way they saw some scenario was the only way and therefore the same way all others would see it.
This doesn't mean that ALL code must be commented for there are some simple ones that are fairly self-explanatory but never assume code can be left uncommented if its good code.
|
|
|
|
|
Even though you are entitled to your own thoughts, I think most programmers would agree in favor of documentation, imagine Java or .NET libraries without the javadoc or help respectively. I would imagine it would take a lot of trial and error to get to what a function actually did, especially, if you are not the author of the function. Documentation exists, mostly, for people who are using or referring to your code after you have written it. In some cases, it also helps the original programmers themselves to recall why they did something in a way they did in a function. The irony is that if the code is really a horror, it would be equally difficult to document or comment it to begin with, atleast in a way that solves the riddle of a function in a more comprehensive way. I personally like to comment and document my code wherever I think is necessary to explain any nitty-gritty of it. Programmers move so fast, that 6 months down the line our own code seems difficult to decode sometimes and hence documentation really helps to quickly understand in plain and simple English or whatever language one may use, what the code does. Unless, the only language you speak is code and you have difficulty interpreting natural language more than a coding language.
Cheers
|
|
|
|
|
annathor wrote: If you feel the need to comment the code,then the code is a horror
You should have worked on our old codebase.. 100,000+ lines of code and three comments. The only printable one was "// bitchin". Of course, one of the two foul language ones was actually helpful 
As far as I can tell, there's only three cases where you don't need comments:
1) you're the only one who has ever, and will ever, work with the code. You'll take it to your grave with you.
2) its a toy project or a throw-away experiemnt... though this is really just a subset of (1)
3) its an open source project.
We can program with only 1's, but if all you've got are zeros, you've got nothing.
|
|
|
|
|
If people maintaining this code are used to the "?" operator, then this code is quite readable, and nearly simple.
But if they're not, then they'll find it a coding horror 
|
|
|
|
|
A developer should know the language they work with
|
|
|
|
|
Definitely agree with you.
But at work, I'm always surprised to see the number of junior developers who don't understand (or don't want to try to understand) this simple construct.. (the "?" operator, I mean)
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
