|
I use Microsoft C 6.0 with DosBox[^] under Windows XP. It should probably work under Windows 7 too.
modified 13-Sep-18 21:01pm.
|
|
|
|
|
It would be a good idea to install the products in the order that they were released. In your case, first install VS 2005 followed by VS 2008. 
"Real men drive manual transmission" - Rajesh.
|
|
|
|
|
|
This is very important... I have VS6, 2003, 2005, and 2008 on one machine...
|
|
|
|
|
They are explicity designed to be installed side by side
Best regards,
Jaime.
|
|
|
|
|
yes they do just pay attention that u install 2005 first and the 2008.remember for anything put version vice first the older then the new.
|
|
|
|
|
I've had a setup like this some 15 years ago, and the only problem I had was the incompatibility between different versions of the MFC. I had to put copies of the correct version into a binary folder and copy my compiled binaries in there during a custom build step to make sure they would be using the correct version. Not sure if such problems still exist, or if they extend to ATL and other runtime libraries.
|
|
|
|
|
Hai,
We have a VC++ application [Acrobat plug-in] where we are using Ultragrid 2.0 for displaying data.
It was an old application where we used VC++ 6.0 and Ultragrid 2.0, it was fine in most of the aspects, and in the grid we were displaying English and Japanese text as required.
Later on we have to upgrade our project to VC++ 2008[Visual studio 2008] for some enhancement work, But after that it is showing some junk characters for Japanese text [but for English we have no problem] in the ultragrid cell, what could be the problem here,
Does ultragrid 2.0 not support VC++ 2008 or not? Or do we need to do some changes here? And acrobat plug-ins can be implemented using only VC++, and no other language.
We cannot rewrite the whole application from the scratch as is a very large application!
What we can do to display Japanese text within the existing project, please help me.
Waiting for your valuable response.
|
|
|
|
|
I don't know Ultragid 2.0 or any other version of it, but maybe you need to play with font settings a bit? E.g. if you check out the LOGFONT[^] struct, it has a member called lfCharSet, maybe you need to play with that one.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> //TODO: Implement signature here<
|
|
|
|
|
sujipal wrote: Does ultragrid 2.0 not support VC++ 2008 or not?
What does the author (infragistic) say about supporting VS2008 ? Did you try with a updated version of Ultragrid ?
sujipal wrote: Or do we need to do some changes here?
Maybe ... when upgrading from a _very_ old version of Visual Studio, some changes will have to be done to either your code or the supporting libraries.
Even at the worse scenario, you should not have to re-write everything, only the part that uses the grid.
Watched code never compiles.
|
|
|
|
|
Hi!
I've an XML file whose contents are as following:
<?xml version="1.0" ?>
<response action="registration">
<element>
<properties name="username">cst11</properties>
<properties name="playerhandle">238768881697142018728993387950411141</properties>
<properties name="skinId">RCA001</properties>
<properties name="errcode" >loginnotAllowed</properties>
</element>
</response>
I've to retrieve the values ("cst11","238768881697142018728993387950411141","RCA001" and "loginnotAllowed") using TinyXML. How to do this? Can any body post some sample code for this?
|
|
|
|
|
|
Hi!
I've written the following code. It loops every element.
TiXmlElement* child = parent->FirstChildElement();
TiXmlElement* prop = child->FirstChildElement();
while(prop)
{
if(prop && prop->Attribute("errcode"))
{
errorcode = prop->GetText();
break;
}
else
prop = prop->NextSiblingElement();
}
}
It loops every element fine. After that I need to check for the username,playerhandle,skinId
and errcode and if it's errcode, I've to extract the "loginnotAllowed".
I don't know how to check this. I need some explanation or some code snippet
for the if block(what should be replaced with the existing to meet my requirements?).
|
|
|
|
|
I have not used tinyXML myself, but isn't it a possibility for you to make the parent node as the node for which you get the errcode and then iterate it's children to get the value of loginnotallowed.
You talk about Being HUMAN. I have it in my name
AnsHUMAN
|
|
|
|
|
when I unplug the Ethernet cable,the client doesn't send the FD_CLOSE event to the server
so the server's online list isn't fresh new.
How about this ?
|
|
|
|
|
Koma Wang wrote: when I unplug the Ethernet cable,the client doesn't send
If the cable is unplugged there is no physical path to send on.
The best things in life are not things.
|
|
|
|
|
First , thanks for your reply !
but how can I get it offline real-time ?
I set a timer to call CheckIsOnline() to find the client struct's m_nLastActive;
the client call SendHeartPacket() every 30 second,
and the server recv it then set the m_nLastActive.
when (GetTickCount() - m_nLastActive) >= (1000 * 10),I will remove from the list.
but when I run some days in wlan server, it be crashed,I cound't found what's wrong with it.
This is my biggest headache !
|
|
|
|
|
Koma Wang wrote: some days in wlan server, it be crashed,I cound't found what's wrong with it.
Sorry, but that does not give us any clues as to what might be happening. If your system is crashing then you should add some trace or debug code to your program and try to trace the conditions that cause the crash.
The best things in life are not things.
|
|
|
|
|
thanks ! 
|
|
|
|
|
I am totally new to C++, this is the first thing I've tried to do.
I have a simple program (A) which I want to receive a message from and send a message to another app (B).
I can send messages from A to B fine but if I do then A longer sees the message sent from B, although B gets 0 as the return from the message it sends to A.
I can receive a message (Message number AuMessage obtained using RegisterWindowMessageA) once from B but the message isn't received by A a second time if I send a message to B. If I never send a message to B I can keep receiving the messages in A.
Obviously I'm doingsomething wrong. Every reference seems to tell me to use something like this
BEGIN_MESSAGE_MAP(szWindowClass, CMyParentWndClass)
END_MESSAGE_MAP()
but I cannot see how to find CMyParentWndClass, so I have added code to WinProc like this
LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam)
{
int wmId, wmEvent;
PAINTSTRUCT ps;
HDC hdc;
if (message == AuMessage )
{msgin = 7;some flag I intend to use
return 76;
}
switch (message)
...
I couldn't add a new case because using a variable (AuMessage ) gives a compilation error.
How should I handle receiving and sending custom messages? Or can anyone supply a link where I can find the correct approach?
|
|
|
|
|
|
Thanks Albert, I'll read those links.
EDIT:
The examples in the link seem to require MFC but I understand I cannot use them in Visual C++ Express. I found it difficult to find examples of using messages for VS Express.
When you say
"
As far as what they mean by CMyParentWndClass, that just means to specify what CWnd derived class is your base class. CWnd derived classes (and really CCmdTarget defined classes as well) support message maps.
"
it doesn't help me because I know it means the base class but I cannot see anywhere how to know what the window is derived from. As far as it looks to me it isn't derived from anything. The class is registered but there is no reference to an inherited class.
I have all the code needed for the program and all the functions work. The data is sent to another app using StdOut/StdIN but I want to convert to using messages. What I hope for is a simple example of a program in VS C++ Express which shows how to use custom messages, and then I could convert the program.
Probably I should accept that I can't quickly put together a simple program to use messages because I know nowhere near enough to understand what to do. Using messages in Delphi or other languages I use is so simple I expected that C++ would be similar but it is not.
<div class="modified">modified on Saturday, July 23, 2011 3:24 PM</div>
|
|
|
|
|
You're right about using MFC in the express version, but you can use an older version of MFC (How to compile MFC code in Visual C++ Express[^]) with your IDE.
martinmos wrote: The class is registered but there is no reference to an inherited class.
In C++, you always know what the class was derived from.
class CMyDialog : public CDialog
{
};
class CMyApp : public CWinApp
{
};
|
|
|
|
|
The header you refer to is given in hundreds of examples, but nowhere in my code can I find anything like that which is why I don't know what the parent window calsss is.
This is probably because I started the project as a Win32 application. If I start a project as a WindowsForm application then the form class does show the parent form as
System::Windows::Forms::Form
but I cannot find the winproc function anywhere. In fact searching all files in solution for "switch" finds nothing.
I have found aother examples where an if clause is used in winproc and so I assume that what I did should be ok, and it does detect the message from another app. So maybe my problem is just that I don't know the correct way to send a message because as soon as I use SendMessage in my main loop the message is recieved in the app I send the message to but I can no longer detect messages from that app even though the app says they have been received.
|
|
|
|
|
Windows forms are C#, not C++.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
