|
I'd like to add a route from my computer to a VMWare Virtual Machine which runs on a computer in a different office. I can access the host computer (192.168.110.164) where the machine is running on a virtual subnet. The IP address of the virtual computer I'd like to connect to is 192.168.44.4 (I *MUST NOT* change it due to some third party software running on it which would need to be configured again by Third Party when the IP address is changed).
I know that there is a "route add" command, but because I do not know anything about routes and metrics, I fail to understand the examples given on some web pages. I tried a "route ADD 192.168.44.0 MASK 255.255.255.0 192.168.110.164", but that seems not work (I cannot ping it from my computer, only from the host).
How do I add that route? Thanks a lot for your hints.
|
|
|
|
|
Finally I found a simpler solution: since the machine I want to connect to is a Virtual Machine, I could add a second network card, and then the machine had an IP address in the "normal" subnet also.
|
|
|
|
|
Why can i change permissions of a folder even i haven't full control over it on the same PC?
Because i am admin or because i created this folder or another reason?
At the same time i can't change these permissions from another PC over the network although i use the same account
Thanks
sorry for my bad English
|
|
|
|
|
HI friends,
I have a web application written using .Net framework 3.5. The applications runs good when running under visual studio. I have installed it on my local machine. Just to be able to host my many applications I have assigned Host name to my application: www.crm_web.com and then in the hosts file in the C:\Windows\System32\drivers\etc directory on my local machine I have included
127.0.0.1 www.crm_web.com which tells the system to look into the system itself for the crm_web.com host name. This all is fine.
Now when through my browser on my local machine I write www.crm_web.com and access the website it runs fine. But when I try to do the same thing using www.crm_web.com/default.aspx the applications doesn't runs properly at all. Infact I am even not able to login into the site. (Default.aspx is a login page and the start up page.) For me it is very necessary that I am able to properly access the website through www.crm_web.com/default.aspx also coz I need to add querystring parameters to this URL. e.g www.crm_web.com/default.aspx?name='gaurav'
Looking forward for some help.
Thanks and Regards,
Gaurav
|
|
|
|
|
Hello all,
This is an update from a question I posted one month ago[^]...
Let's see there is a HP server (win 2003 standard) that get's stopped suddenly each day one or two times...
When it gets stopped I can't see any message in the logs that could help me to know what has happened...
The server gets stopped abruptly and it shows me the light INTERNAL ERROR... 
The only messages that I see before the shutdown are related to printing operations (some of them 20 minutes or half an hour before the shutdown) and some MRxSmb warnings...
I don't know where to look... any idea from you?
Thank you in advance!
|
|
|
|
|
Joan Murt wrote: shows me the light INTERNAL ERROR...
A hardware problem? Maybe the BIOS maintains some kind of error log, or at least the last reason it turned the error light on.
Cheers,
Peter
Software rusts. Simon Stephenson, ca 1994.
|
|
|
|
|
Found it... it seems that there is a power filter that is not acting good... Thanks God there are some status leds spreaded throug the motherboard that allow to see what is going on...
PS: Thank you for trying! 
|
|
|
|
|
In planning to decommission a test server (Windows Server 2003), a number of files were copied from it to another server (Windows Server 2003).
After the files were copied, we tried to rename a directory - access is denied.
Finally tracked the issue down to a number of Excel spreadsheets in a subdirectory. When trying to open them, we get the message '... is locked for editing' by either 'Crystal Reports' or a user that retired over a year ago!
Crystal Reports is not installed on the new server and the aforementioned user never had access to the server.
Any idea on how we can delete the files?
Thanks,
Tim
modified on Thursday, July 14, 2011 1:59 PM
|
|
|
|
|
boot linux live cd .... mount drive ... delete files with "sudo rm -rf <foldername>" ... reboot into windows
|
|
|
|
|
So true Lauren...
And so easy...
+5
|
|
|
|
|
|
Model AML-6KG Degaussing Paddle (NSA Approved for Perpendicular and Longitudinal Recording)
On Sale for US$680.00
|
|
|
|
|
Am I missing something, or is this a $680 magnet?
|
|
|
|
|
Fancy magnet! ...platinum plated maybe? 
|
|
|
|
|
Remove the permissions for the SID's that cant be resolved. They are normally the culprits. Then take ownership of the file.
|
|
|
|
|
Check the directory / file security - you will probably see a user SSID from the original drive that was copied over along with the files - you can try to delete the SSID entry. Another thing to try is to see if you can change the Properties / Security / Access Control for the folder above the one you want and apply it to all of the children.
Steve
_________________
I C(++) therefore I am
|
|
|
|
|
0. Open a command window and navigate to the directory.
1. Leaving the command window open, start Task Manager and kill all explorer.exe instances.
(Whoops - there goes your desktop!  ) 
2. Return to the command window and delete the nasties.
3. Restart explorer either through the command window or File/New task in the Task Manager.
Thats all folks, nothing to see here - except you got your desktop back. 
|
|
|
|
|
Interesting that I should collect a high-power down-vote for something that absolutely works - I used it myself on Server 2003 yesterday.
Ah well, c'est la vie.
|
|
|
|
|
I agree with you...
Countered!
"Whether you think you can, or you think you can't--either way, you are right." — Henry Ford
"When I waste my time, I only use the best, Code Project...don't leave home without it." — Slacker007
|
|
|
|
|
Never tried this, but I can see how that would work...
|
|
|
|
|
Issue solved:
Using SysInternals Handle.exe, get a list of files in use by whatever applications.
Find and kill the application(s).
In this case, cidaemon.exe, the indexing service. Set the service to manual and deleted files.
For those that tried to help, thank you.
Tim
|
|
|
|
|
Hi,
If you are using mac snow leopard loaded on vmware, how would you access a flash disk drive??
Thanks
|
|
|
|
|
Alright, I have linked to a screenshot of my most current SQL Server 2008 Express log. I was going through my Windows Event Viewer, as I do periodically, simply looking for anything out of the ordinary (my routine system maintenance). I noticed several events for SQL Server with the source "Logon". When I loaded SQL Server Management Studio Express and viewed the most current log (from today) I have a VERY enormous amount of failed (remote) login attempts, all saying "Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: *Different IP's Here*]". What is going on here?
These date back to my logs from June 20, 2011, I just now noticed. I must have missed them in the Event Viewer in the past. There are thousands upon thousands, probably tens of thousands of them. They seem to come in for no more than a minute at a time. However, if you look at the log times, the attempts happen every few seconds within that minute. Then they stop and the attempt comes in from another IP address.
What should I do? I already disabled remote connections, as I did not need it anyhow. I'm not sure exactly why I had it enabled. But is this something I should worry about, since I follow procedures to ensure a strong, impossible-to-crack password? :-P
djj55: Nice but may have a permission problem
Pete O'Hanlon: He has my permission to run it.
|
|
|
|
|
Make sure to have your internal network isolated from the internet via a firewall. That should avoid people sniffing around your network to see if there's any computers running any type of servers. Not sure about SQL server, but a lot of servers will allow you to lock out an account if there's too many failed log in attempts, this would keep them from trying different passwords over and over again. The last thing would be, if they used the same username for every attempt, they may know the username exists as a user to the server, in that case, I would recommend changing the username completely (in SQL servers that's typically pretty easy).
|
|
|
|
|
Hi,
I'm running windows7 and VMWare workstation v.7.. When trying to load an image of Mac Snow leopard I get a strange message saying:
Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Workstation supports hardware virtualization.
Ignoring this problem, how would you install Snow Leopard on VMWare?? Apart from buying Mac laptop, any suggestion??
Many thanks,
Ed: moved on Saturday, July 2, 2011 9:34 PM
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
