|
You don't need any code to Copy and Paste from one spreadsheet to another. 
...and I have extensive experience writing computer code, including OIC, BTW, BRB, IMHO, LMAO, ROFL, TTYL.....
|
|
|
|
|
Hi
Actaully from my system I used the below code and it works fine as a local Report. But my program has to be accessed by 2 more users on network. For that I have no any idea, what else I need? May be I need to install anything on my sqlserver installed machine in network? or I have to install reportviewer to my users system ?
And any sample code for that?
Any Guidences will be happy.
reportViewer1.RefreshReport();
Microsoft.Reporting.WinForms.ReportDataSource VehRDS = new Microsoft.Reporting.WinForms.ReportDataSource();
RepDS.Name = "DataSet1";
RepDS.Value = MyDataTable1;
reportViewer1.LocalReport.DataSources.Clear();
reportViewer1.LocalReport.DataSources.Add(VehRDS);
reportViewer1.LocalReport.ReportPath ="C:\\Documents and Settings\\...\\My Documents\\Visual Studio 2010\\Projects\\MyProject\\My_Report.rdlc";
reportViewer1.RefreshReport();
reportViewer1.Visible = true;
I tried by the below code
reportViewer1.ServerReport.ReportPath = "//Mysever/MyProject/Expence_Report.rdlc"; And I copied my report to that server folder And I tried. Is it correct or some other way?
Thanks For The Ideas & Guidences
Thanks and Regards 
PARAMU
modified on Thursday, June 2, 2011 7:50 AM
|
|
|
|
|
Hello Experts,
You knows every body can do the programming if they spend some years for programming. But they can not do the systematic programming.
Guess : I have a requirement of School Management System Software.
So i want to know that where to start the project. and Which methods to declare in interface.
Thanks
If you can think then I Can.
|
|
|
|
|
eg_Anubhava wrote: So i want to know that where to start the project. and Which methods to declare
in interface.
Well, one thing good developers know is that you never start off by worrying what methods to declare in the interface. A good developer will normally start off by trying to understand what the problem is that they are trying to solve. Talk to users. Gather requirements and flesh them out. Ask questions and attempt to get consensus of what you are going to deliver. In other words, start off at the design stage. Do not attempt to skip this step. Even Agile methodologies still have an emphasis on the design phase - there is no subsitution for this step. Now you know where to start.
|
|
|
|
|
eg_Anubhava wrote: But they can not do the systematic programming.
The what? 
|
|
|
|
|
|
ismail20 wrote: help me ?
No. I have no idea what you are trying to accomplish. Are you trapped in a jam factory just waiting for someone to unlock the door?
|
|
|
|
|
Huh?[^]
Luc Pattyn [My Articles] Nil Volentibus Arduum
The quality and detail of your question reflects on the effectiveness of the help you are likely to get. Please use <PRE> tags for code snippets, they improve readability. CP Vanity has been updated to V2.3
|
|
|
|
|
What application?
------------------------------------
I will never again mention that I was the poster of the One Millionth Lounge Post, nor that it was complete drivel. Dalek Dave
CCC Link[ ^]
Trolls[ ^]
|
|
|
|
|
Okay, so I'm trying to be a good .Netizen here, but I've been fighting with non-descript errors and no clear answer as to what approach to take. I'm trying to use Database first, but I'm getting nowhere fast.
I want to take advantage of the free client-side validation in ASP.NET MVC3, but this seems completely lost when using EF.
Am I missing something? Even a simple thing - like nvarchar(6) - is being overlooked. The tool-generated code doesn't spit out things like [StringLenght(6)] (from System.ComponentModel.DataAnnotations) so it seems that you've lost all client-side validation, no?
Is there a way to turn it on?
To have the EDMX generate the appropriate attributes?
To track down the so-called "magic unicorn" and ring it's silver-blood-filled little neck?
end slash venting.
|
|
|
|
|
Hi,
I am trying to send a big file over a TCP connection using NetworkStream and TCPClient. Both the client and the server is written in C#.
There is no problem while transferring small files around the size of 300KB. My buffer size is 2KB and here is how the protocol works.
-Server requests the file.
-Client tells the server the size of the file, and then sends the first 2KB of it.
-The server asks for another chunk of the file -like, send 2KB data, starting from 42649-
-Client sends the chunk
-Server asks for more, and client sends it...
-When the end of file is reached, the client acknowledges the server that transfer is complete.
Without looking at the code, since it is too long to be posted here, can you see any possible problems that may be causing this problem? I even tried sleeping the thread while receiving and processing the incoming chunks of data.
Regards
|
|
|
|
|
You haven't even said what the problem is.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
Yeah, sorry about that.
While I am trying to transfer the data, it is stuck at some point. The server doesn't make any other requests and hence, the client doesn't send any more data.
I have no idea why nothing new happens.
|
|
|
|
|
Well, there is no way to tell why that happens just from the info you have provided.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
Run the server in the debugger, and be sure that the size of the file is communicated properly.
Maybe the server thinks the file is smaller than it really is, and so it stops asking for more data.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
I am aware that the information with which I've provided you is less than sufficient, but it is really hard for me to isolate the code that works on the transfer, and there is a chance that isolating it from the rest of the application will leave you with no problem to solve. The problem may as well be stemming from the structure of the rest of the application.
I will check if there is a problem with the file size tomorrow, but I don't think that is the problem. When I occasionally place a breakpoint and break the program, it manages to transfer a little bit more data (around 300KB more).
|
|
|
|
|
You have no mechanism in your protocol to force either the client or server to force another request for the same data. If, after a timeout expires, the client doesn't get an ACK from the server, it should be able to try and reestablish communication, telling the server it's going to resend a block of data.
|
|
|
|
|
Thank you. Why haven't I thought of that.
I will add that mechanism first thing tomorrow. By the way, even though this will probably solve my problem; there must still be a problem in my system since it is really unlikely for a package to be lost on a local TCP connection.
|
|
|
|
|
TCP guarantees that the sent packets will arrive, unless the connection drops entirely (which the OP would have noticed), so I doubt that this is the problem.
|
|
|
|
|
The connection is still intact, it doesn't drop. The only problem is that the server stops requesting chunks.
|
|
|
|
|
I know. It works great too, on paper. In actual practice, it's not 100% accurate.
|
|
|
|
|
Some possibilities
- Ignored exceptions on server
- Buffer doesn't match size (read/write). Either end.
- Something is pausing the server.
Seems that the problem is deterministic so you can add logging and print exactly what the sizes are that you read and write each time.
|
|
|
|
|
what you should do IMO is this:
1.
improve observability: provide logging on both sides, with actual times, and relevant data, such as offset and length.
2.
create a synthetic test file, so the receiver can predict and hence verify what should and is received. Here is one useful algorithm: for each block, start with the offset (yes, I mean stuff the offset in the data, I know you already send it as metadata), then add incrementing data modulo some number that isn't a power of 2 (for bytes, 255 works just fine). The net result is (1) each block is different (the offset!), and (2) yet very predictable. You'll see immediately if and when what gets received is completely wacked.
3.
As you have packets already in your yet extremely simple protocol, add a checksum to the protocol, so the receiver can verify things are correct. And send an ACK (when OK) or a RESEND-REQUEST (when checksum fails or something goes wrong).
4.
Refinement: don't wait for the ACK before you send the next packet; a strictly sequential process would slow things down needlessly (sender calculates checksum, sends data, waits for ACK, receiver gets data, checks checksum, sends ACK/RESEND, resulting in two periods the line isn't active at all). Instead, allow for at least 1, better a few, packets in progress, i.e. only wait for ACK for packet 1 after having send packet 1+N where N is 1 upto a few.
Luc Pattyn [My Articles] Nil Volentibus Arduum
The quality and detail of your question reflects on the effectiveness of the help you are likely to get. Please use <PRE> tags for code snippets, they improve readability. CP Vanity has been updated to V2.3
|
|
|
|
|
Since it works for small files, and appears to be deterministic (does it always fail at the same point? or is it just more likely that larger files will fail?), it must be to do with filling an array, running out of space in a TCP buffer or something similar. If it is not so simple (i.e. it fails more on larger files, but it is not deterministic) then it is probably to do with the handshake to request more data.
It is impossible to go into any more detail than that with the information available. I can only echo the advice to sprinkle your code liberally with logging statements to find out what is actually happening.
Why are you doing that, anyway? TCP guarantees the ordering and transmission so you can just send the whole file on the sender end. What you are doing adds latency (2 way ping) each chunk.
|
|
|
|
|
I can't say that it is deterministic since if I pause the program at certain intervals, it can complete the transmission. If I don't pause the program at all, it stops after transferring 200-300KB.
I am aware that what I am doing is just slowing down the transfer rate, but I am new to this are of programming and currently trying to develop this project to increase my experience.
I will now add a timeout system to the server and request the rest of the data if nothing is incoming.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
