|
Now i did, but it doesn't seem to be involved, isn't nmake used only for makefile projects?
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> //TODO: Implement signature here<
|
|
|
|
|
Code-o-mat wrote: ...but it doesn't seem to be involved, isn't nmake used only for makefile projects?
Yes, but I was just giving you something else to consider. I often times do not solve problems directly, but give folks ideas and suggestions that they can then take a step further and decide if its right for them or not.
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"Man who follows car will be exhausted." - Confucius
|
|
|
|
|
The idea was good, thank you. Indeed sometimes all people need is a kick in the right direction and then they can tumble down the stairs themselfs.  Most of the time i am just looking for that kick when asking questions, getting the complete solution on a plate is no fun.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> //TODO: Implement signature here<
|
|
|
|
|
How can I get direct access of disk and partition of disk instead UAC enabled or disabled?
There is a utility which provides direct access called RAWDISK from eldos.
But this is paid, Is there anything free?
|
|
|
|
|
Firstly, this is not a C/C++ question, so it does not belong in this forum.
Secondly, if you are looking for free software then a Google search should be your first port of call.
I must get a clever new signature for 2011.
|
|
|
|
|
Do you realize UAC is a feature, not a bug?
(it looks like a bug, I should admit).
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
[My articles]
|
|
|
|
|
I want the color of every pixel of bitmap image, so that I can extract alpha value of it.
I have tried GetPixel, but it is very slow. I tried GetDIBits as well but it's not giving me the proper color as compare to GetPixel gives. Can somebody help me??
|
|
|
|
|
Amrit Agr wrote: I tried GetDIBits as well but it's not giving me the proper color as compare to GetPixel gives.
What do you intend, specifically (i.e. are you sure you got the right pixel value, could you post some code)?
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
[My articles]
|
|
|
|
|
The buffer returned by GetDIBits holds the pixel data in a way that isn't very intuitive:
- The pixel data is stored bottom-up, which means line 0 is the bottom of the image.
- The pixel values are stored as blue/green/red rather than red/green/blue.
- Each line is 4byte-alligned. So if your bitmap would be 24bpp (3 bytes) and the image width is 125 pixels, the expected line length would be 3*125 = 375, but it is in fact rounded up to 376, where the 376th byte contains no information.
modified 13-Sep-18 21:01pm.
|
|
|
|
|
I think GetPixel doesn't give you any alpha values, or does it? Anyways, you could alternatively use Gdiplus::Bitmap[^] and its Bitmap::GetPixel[^] method, not sure about its speed though.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> //TODO: Implement signature here<
|
|
|
|
|
HI ALL
I am trying to load image buffer and update image buffer per second .
The function can load 256*256 image or 512*512 image but it can not load 768*576 image.
I apply it with following function,Please let me know how can i load 768*576 image buffer?.
int iwidth=768;
int iHeight=512;
unsigned char* data = 0;
float angle=1.0f;
BOOL CTestDlg::CreateWindowGL(HWND window) // This Code Creates Our OpenGL Window
{
DWORD windowStyle = WS_OVERLAPPEDWINDOW; // Define Our Window Style
DWORD windowExtendedStyle = WS_EX_APPWINDOW; // Define The Window's Extended Style
int iBitperPixel=16;
PIXELFORMATDESCRIPTOR pfd = // pfd Tells Windows How We Want Things To Be
{
sizeof (PIXELFORMATDESCRIPTOR), // Size Of This Pixel Format Descriptor
1, // Version Number
PFD_DRAW_TO_WINDOW | // Format Must Support Window
PFD_SUPPORT_OPENGL | // Format Must Support OpenGL
PFD_DOUBLEBUFFER, // Must Support Double Buffering
PFD_TYPE_RGBA, // Request An RGBA Format
iBitperPixel, // Select Our Color Depth
0, 0, 0, 0, 0, 0, // Color Bits Ignored
0, // No Alpha Buffer
0, // Shift Bit Ignored
0, // No Accumulation Buffer
0, 0, 0, 0, // Accumulation Bits Ignored
16, // 16Bit Z-Buffer (Depth Buffer)
0, // No Stencil Buffer
0, // No Auxiliary Buffer
PFD_MAIN_PLANE, // Main Drawing Layer
0, // Reserved
0, 0, 0 // Layer Masks Ignored
};
GLuint PixelFormat; // Will Hold The Selected Pixel Format
CDC *pDc= GetDC(); // Grab A Device Context For This Window
PixelFormat = ChoosePixelFormat (pDc->m_hDC, &pfd); // Find A Compatible Pixel Format
if (SetPixelFormat (pDc->m_hDC, PixelFormat, &pfd) == FALSE) // Try To Set The Pixel Format
{
// Failed
ReleaseDC (pDc); // Release Our Device Context // Zero The Window Handle
return FALSE; // Return False
}
hRC = wglCreateContext (pDc->m_hDC); // Try To Get A Rendering Context
// Make The Rendering Context Our Current Rendering Context
if (wglMakeCurrent (pDc->m_hDC, hRC) == FALSE)
return FALSE;
glViewport (0, 0, (GLsizei)(iwidth), (GLsizei)(iHeight)); // Reset The Current Viewport
glMatrixMode (GL_PROJECTION); // Select The Projection Matrix
glLoadIdentity (); // Reset The Projection Matrix
gluPerspective (45.0f, (GLfloat)(iwidth)/(GLfloat)(iHeight),1.0f, 100.0f); // Calculate The Aspect Ratio Of The Window
glMatrixMode (GL_MODELVIEW); // Select The Modelview Matrix
glLoadIdentity ();
return TRUE; // Window Creating Was A Success
// Initialization Will Be Done In WM_CREATE
}
BOOL CTestDlg::Initialize()
{
// Start Of User Initialization
angle = 1.0f;
// Set Starting Angle To Zero // Grab A Device Context For Our Dib
glClearColor (0.0f, 0.0f, 0.0f, 0.5f); // Black Background
glClearDepth (1.0f); // Depth Buffer Setup
glDepthFunc (GL_LEQUAL); // The Type Of Depth Testing (Less Or Equal)
glEnable(GL_DEPTH_TEST); // Enable Depth Testing
glShadeModel (GL_SMOOTH); // Select Smooth Shading
glHint (GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST); // Set Perspective Calculations To Most Accurate
glEnable(GL_TEXTURE_2D); // Enable Texture Mapping
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_NEAREST); // Set Texture Max Filter
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_NEAREST); // Set Texture Min Filter
glTexGeni(GL_S, GL_TEXTURE_GEN_MODE, GL_SPHERE_MAP); // Set The Texture Generation Mode For S To Sphere Mapping
glTexGeni(GL_T, GL_TEXTURE_GEN_MODE, GL_SPHERE_MAP); // Set The Texture Generation Mode For T To Sphere Mapping
glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, 256,256, 0, GL_RGB, GL_UNSIGNED_BYTE, data);
return TRUE; // Return TRUE (Initialization Successful)
}
void CTestDlg::Draw() // Draw Our Scene
{
glClear (GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // Clear Screen And Depth Buffer
int i,j;
LoadBmpFile("C:\\test.bmp",i,j);
glTexSubImage2D (GL_TEXTURE_2D, 0, 0, 0,i, j, GL_RGB, GL_UNSIGNED_BYTE, data);
if (TRUE) // Is Background Visible?
{
glLoadIdentity(); // Reset The Modelview Matrix
glBegin(GL_QUADS); // Begin Drawing The Background (One Quad)
// Front Face
glTexCoord2f(1.0f, 1.0f);
glVertex3f( 11.0f, 8.3f, -20.0f);
glTexCoord2f(0.0f, 1.0f);
glVertex3f(-11.0f, 8.3f, -20.0f);
glTexCoord2f(0.0f, 0.0f);
glVertex3f(-11.0f, -8.3f, -20.0f);
glTexCoord2f(1.0f, 0.0f);
glVertex3f( 11.0f, -8.3f, -20.0f);
glEnd(); // Done Drawing The Background
}
glFlush (); // Flush The GL Rendering Pipeline
}
|
|
|
|
|
Please, in the future read the posting guidelines before posting (for instance, use the pre tags to format your code properly so that it is readable).
Now to your question: OpenGL only handle images which have a power of 2 as dimensions. Loading images with non-standard dimensions will work on certain graphic cards but not all of them. So, the solution to your problem is to simply create your image as a 1024x1024 image (for instance, additional space is filled with white) and then when the image is used (using glTexCoord2) you only take the part where your image really is (for instance if your image is 768 pixels wide, you have to specify 768/1024=0.75 in your glTexCoord function).
|
|
|
|
|
int iwidth=512;
int iHeight=512;
OK,Now i am create image 512*512 and give in glTexImage2D
glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, iwidth,iHeight, 0, GL_RGB, GL_UNSIGNED_BYTE, data);
In Draw Function
glTexSubImage2D (GL_TEXTURE_2D, 0, 0, 0,768, 576, GL_RGB, GL_UNSIGNED_BYTE, data);
float fval=(float)(768.0f/512.0f);
if (TRUE)
{
glBegin(GL_QUADS);
glTexCoord2f(fval, fval);
glVertex3f( 11.0f, 8.3f, -20.0f);
glTexCoord2f(0.0f, fval);
glVertex3f(-11.0f, 8.3f, -20.0f);
glTexCoord2f(0.0f, 0.0f);
glVertex3f(-11.0f, -8.3f, -20.0f);
glTexCoord2f(fval, 0.0f);
glVertex3f( 11.0f, -8.3f, -20.0f);
glEnd();
}
I can not able to load image like above coding.
By the way,My view size if fix 512*512 and i want to support zoom also.
|
|
|
|
|
That doesn't make any sense: tell me how you put an 768x768 image in an 512x512 image 
How large is your image finally ? Because your fval (768/512) is bigger than 1 (and so, it is invalid for the glTexCoord function).
|
|
|
|
|
I know that some network car has this function. But how to call network interface?
|
|
|
|
|
be more specific on your question.
|
|
|
|
|
For example, if today is 2012 Jan 1st, the computer boots and then enter the windows system by itself. But I doknow how to call the bios to set it.
|
|
|
|
|
|
|
I am currently taking data from a database that is in the form of char data and attempting to convert to a string and then saving in a char array. It appears that these strings have to be saved in a two dimension array. The first array or inner array containing each element of the date in the form of chars. The outer array then contains each record or occurance of the date. Can someone help me in copying the string data into the array? Listed below is what I have so far.
char Date1[10] = {};
vFieldDate = rec->Fields->GetItem("Date")->Value;
for(int r = 0; r < 1; r++)
{
for(int c = 0; c < 10; c++)
{
strcpy (Date1,vFieldDate);
strcpy (Date[r][c],Date1[10]);
printf ("%s",Date[r][c]);
}
}
|
|
|
|
|
Mike Certini wrote: strcpy (Date[r][c],Date1[10]);
strcpy (Date[r][c],Date1); is correct.
Hope you have declared char Date[MAX][10] (where MAX will be greater than or equal to l) , or dynamically allocated memory for it.
|
|
|
|
|
Through research the following was derived from an MSDN website:
#define ARR 65500 //Total Records
#define TARGSIZE 11 //Field Length
char Date[ARR][TARGSIZE] = {};
orig = rec->Fields->GetItem("Time")->Value;
const size_t newsize = 100;
char nstring[newsize];
strcpy_s(nstring, (char *)orig);
strncpy(Date[cyc],nstring,TARGSIZE - 1);
printf("%s",nstring);
printf("\n");
Original MSDN website:
http://msdn.microsoft.com/en-us/library/ms235631(v=vs.80).aspx[^]
|
|
|
|
|
Why not:
strncpy(Date[cyc], (char *)orig, TARGSIZE - 1);
strncpy(Date[cyc], (char *)rec->Fields->GetItem("Time")->Value, TARGSIZE - 1);
I must get a clever new signature for 2011.
|
|
|
|
|
Gentlemen,
I hope everyone is having a good day.
I have an problem with my .dll that is linked to Excel.
I have 2 functions in the file, they are named in the def file and they work fine.
I added a third this morning, added name to def file.
I declared it in VBE.
For some reason, when I try to type it into a cell and give it a variable, i.e. cell formula is =Hs_P(B8),
immediately Excel has an error and shuts down. I am very perplexed.
Any ideas? Have I given enough information?
This is the error Excel is throwing out "Excel asertion error"
And the line from the code _ASSERTE(_BLOCK_TYPE_IS_VALID(pHead->nBlockUse));
I haven't found the problem, but I believe it is the way I am calling one function from inside of another function.
|
|
|
|
|
Assuming you are talking about some C++ code then you may need to use your debugger to find exactly where it is failing. From the information provided above you have an invalid pointer somewhere.
I must get a clever new signature for 2011.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
