after deployment - WPF Discussion Boards

20-Dec-10 4:25

can you please refer me to a source which has detailed instructions on how to deploy a silverlight app which uses a wcf?
I have searched in many places but nothing straight forward.
Can you assist please?
Thanks

Ray Cassick20-Dec-10 4:46

Ray Cassick

20-Dec-10 4:46

I am not sure there is any specific 'instructions' that cover that because I have not seen anything different about it that deploying any other type of app that uses WCF. The only odd thing you may NOT be aware of is that all services in Silverlight HAVE to be async in nature. Not everyone seems to know that part.

LinkedIn[^] | Blog[^] | Twitter[^]

RaviRanjanKr20-Dec-10 5:26

RaviRanjanKr

20-Dec-10 5:26

Hope this link[^] will work for you.

arkiboys20-Dec-10 5:50

20-Dec-10 5:50

Thank you for the link but it does not help me as I am not using azure, etc.
At present, I have created a virtual directory on the webserver which point to the web project folder (Which I copied from my machinen to the virtual directory on the server).
On browsing to the site, it says page can not be found.
Any ideas please?

RaviRanjanKr20-Dec-10 6:26

RaviRanjanKr

20-Dec-10 6:26

oh!

then you should check this Link[^]

after deployment

arkiboys20-Dec-10 0:36

20-Dec-10 0:36

I have deployed the silverlight 4 application which uses wcf.
In the wcf, there is a file called test.xml
How is it possible to view this .xml file which sits in the wcf project.
I can obviously see it in .sln but when I deploy then I do not know where to find the .xml file which sits in wcf.
Question:
How can I manually browse to this .xml file please?
Thanks

deploy to local machine

arkiboys19-Dec-10 22:58

Re: deploy to local machine

19-Dec-10 22:58

My .sln contains a silverlight 4 project, wcf project and obviously the web host Defaultpage.aspx

I can run the .sln and all works fine...

I would like to test it on my localmachine first by being able to browse to the address...
I have created a virtual directory. Under default web site I have created a virtual directory called mytestsite and it points to the web host folder.

Question:
When I trype something like the following address http://localhost/mysite/defaultpage.aspx
Then it does not browse to it.
It says the website declined to show this webpage.

What do I need to do so that I can browse to the web address for my test app please?

Thanks

Abhinav S20-Dec-10 3:01

Abhinav S

20-Dec-10 3:01

Hope you have added entries to IIS as shown here[^]

The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.

My latest tip/trick

General guidance - A WPF Grid

Rob Philpott17-Dec-10 7:30

Rob Philpott

17-Dec-10 7:30

I want to display some stuff in a scrollable grid using WPF. Things to go in the cells are numbers, strings and icon style buttons, often with a few of these things in a single cell. Now because of the way you can embed just about anything inside anything else in WPF I'm thinking about using a grid panel inside a scroll viewer, and using something like a stackpanel in the 'cells' to hold the buttons and labels etc.

If this were GDI, I'd be thinking about using a 3rd party grid or maybe even rolling my own to do this - I'm quite comfortable in this arena, but not so sure in WPF.

So my question is what are your opinions about doing the above? The grid could have at worse about 40 rows and in an absolute extreme about 120 columns - hinting at some sort of virtualization strategy. Any suggestions gratefully received particuarly if they don't suggest buying something. Quite new to WPF still and not sure the best way to go.

Regards,
Rob Philpott.

Re: General guidance - A WPF Grid

Ian Shlasko17-Dec-10 8:07

Ian Shlasko

17-Dec-10 8:07

If you're using WPF 4, you should already have the WPF DataGrid in your toolbox. If you're still on 3.5, install SP1 and get the WPF Toolkit from http://wpf.codeplex.com

Sure, you could roll your own if you like, but it's not necessary.

Proud to have finally moved to the A-Ark. Which one are you in?
Author of the Guardians Saga (Sci-Fi/Fantasy novels)

Re: General guidance - A WPF Grid

Rob Philpott19-Dec-10 22:36

Rob Philpott

19-Dec-10 22:36

Thanks dude.

Regards,
Rob Philpott.

adding a non microsoft silverlight .dll

arkiboys17-Dec-10 4:08

17-Dec-10 4:08

Hi,
I get this error when trying to add a reference to a silverlight 4.0 app.
Is there a way to solve this problem please? See below:
Thanks

you can't add a reference to TIBCO.Rendezvous.dll as it was not built against the silverlight runtime. Silverlight projects will only work with silverlight assemblies.

Pete O'Hanlon17-Dec-10 4:27

Pete O'Hanlon

17-Dec-10 4:27

This error is telling you that the version of the framework that you are targeting is completely different from the version this DLL was written in. In other words, there is no compatibility at any level as one uses the Silverlight assemblies and one doesn't. Now, bear in mind that you would be expecting the two frameworks to be attempting to run in the same application process space, how do you expect it to load and run two different sets of some of the same assemblies at the same time?

You can go from Silverlight to none-Silverlight assemblies, but you can't do it the other way round. I see that TIBCO have partnered with MS on Silverlight functionality, so it's entirely possible that they have a Silverlight version that you can use.

I'm not a stalker, I just know things. Oh by the way, you're out of milk.

Forgive your enemies - it messes with their heads

My blog | My articles | MoXAML PowerToys | Onyx

arkiboys17-Dec-10 6:13

17-Dec-10 6:13

Thank you

Abhinav S17-Dec-10 5:59

Abhinav S

17-Dec-10 5:59

No there is no way to solve this problem - sorry.

The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.

My latest tip/trick

Visit the Hindi forum here.

storyboard automatically undoing [modified]

#realJSOP21-Dec-10 0:16

#realJSOP

21-Dec-10 0:16

The library you're trying to add a reference for wasn't compiled for Silverlight. If you have the source code to the library, and if it doesn't use libaries for code that Silverlight doesn't all, you can recompile it and then link it. Otherwise, you're screwed.

.45 ACP - because shooting twice is just silly
-----
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"The staggering layers of obscenity in your statement make it a work of art on so many levels." - J. Jystad, 2001

Chazzysb17-Dec-10 0:58

Chazzysb

17-Dec-10 0:58

Hi,

Silverlight 4, Expression Blend 3

I understand template triggers in WPF are not available in Silverlight...
I used Blend to create a button template - i want the button to grow in size on the mouseover event.
I added a transition to the button in Blend and it generated the zaml...
Im assuming the latest fashion is 'VisualStateManager.VisualStateGroups' instead of triggers to do this in Silverlight...
This works fine but when the animation is complete the button resizes itself to the original size - I want the button to retain its size while the mouse is over.

Ive listed the relevant zaml below - ive tried setting storyboard properties but still the button flicks back to its original size once the animation is complete.

Does anyone know how I can retain the buttons size?

Thanks,
Chas

<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="FocusStates">
<VisualState x:Name="Focused"/>
<VisualState x:Name="Unfocused"/>
</VisualStateGroup>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="00:00:00" To="MouseOver">
<Storyboard AutoReverse="False" SpeedRatio="1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="rectangle" Storyboard.TargetProperty="(UIElement.RenderTransform).(TransformGroup.Children)[0].(ScaleTransform.ScaleY)">
<EasingDoubleKeyFrame KeyTime="00:00:00.5000000" Value="1.654"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="rectangle" Storyboard.TargetProperty="(UIElement.RenderTransform).(TransformGroup.Children)[3].(TranslateTransform.Y)">
<EasingDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="rectangle" Storyboard.TargetProperty="(UIElement.RenderTransform).(TransformGroup.Children)[0].(ScaleTransform.ScaleX)">
<EasingDoubleKeyFrame KeyTime="00:00:00.5000000" Value="1.16"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="rectangle" Storyboard.TargetProperty="(UIElement.RenderTransform).(TransformGroup.Children)[3].(TranslateTransform.X)">
<EasingDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</VisualTransition>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver" />
<VisualState x:Name="Pressed"/>
<VisualState x:Name="Disabled"/>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>

modified on Friday, December 17, 2010 7:35 AM

Re: storyboard automatically undoing

Chazzysb17-Dec-10 2:31

Chazzysb

17-Dec-10 2:31

Ok for anyone else who experiences this...

move the storyboard out of VisualStateGroup.Transitions and into <VisualState x:Name="MouseOver" >

<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Grid Margin="0,0,0,0" VerticalAlignment="Bottom">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver" >
<Storyboard AutoReverse="False" SpeedRatio="1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="rectangle" Storyboard.TargetProperty="(UIElement.RenderTransform).(TransformGroup.Children)[0].(ScaleTransform.ScaleY)">
<EasingDoubleKeyFrame KeyTime="00:00:00.5000000" Value="1.654"/>
</DoubleAnimationUsingKeyFrames>

Change WPF TextBox border when it has focus

astibich216-Dec-10 13:10

astibich2

16-Dec-10 13:10

I am trying to change the border color of a WPF TextBox when it has focus. I'm doing this in code using the focus events:

private void TextBox_GotFocus(object sender, RoutedEventArgs e)
{
_text.BorderBrush = Brushes.Red;
}

private void TextBox_LostFocus(object sender, RoutedEventArgs e)
{
_text.BorderBrush = Brushes.Blue;
}

This does not work. My googling seemed to indicate that the TextBox has built in focus behavior that could be overriding my behavior. The proposed solution was to null the "TextBox.FocusVisualStyle' property. This also did not work.

Any ideas out there?

Aaron

SledgeHammer0116-Dec-10 18:53

SledgeHammer01

16-Dec-10 18:53

You would need to modify the control template. The border shenanigans are done in there. The ListBox, TextBox, etc. all use a "chrome border" which does all that using triggers.

Khaniya17-Dec-10 1:25

Khaniya

17-Dec-10 1:25

I have try but not success
My code is

<br />
<Window x:Class="WpfApplication3.Pratice"<br />
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"<br />
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"<br />
    Title="Pratice" Height="300" Width="300"><br />
    <Window.Resources><br />
        <Style TargetType="{x:Type TextBox}"><br />
            <Style.Triggers><br />
                <Trigger Property="IsFocused" Value="True"><br />
                    <Setter Property="BorderBrush" Value="Red"></Setter><br />
                    <Setter Property="BorderThickness" Value="4" /><br />
                </Trigger><br />
            </Style.Triggers><br />
        </Style><br />
    </Window.Resources><br />
    <Grid><br />
        <TextBox Name="Text1" Height="100" Width="100" BorderBrush="Pink">Hello</TextBox><br />
    </Grid><br />
</Window>

Life's Like a mirror. Smile at it & it smiles back at you.- P Pilgrim
So Smile Please

Tarun.K.S19-Dec-10 19:25

Tarun.K.S

19-Dec-10 19:25

In the xaml of the window, do this:

<Window.Resources>
<Style x:Key="TextBoxStyle" TargetType="TextBox">
<Style.Triggers>
<Trigger Property="IsFocused" Value="False">
<Setter Property="BorderBrush" Value="Blue"/>
</Trigger>
<Trigger Property="IsFocused" Value="True">
<Setter Property="BorderBrush" Value="Red"/>
</Trigger>
</Style.Triggers>
</Style>
</Window.Resources>