Loading a CBitmap directly from file system without requiring ::LoadBitmap - C / C++ / MFC Discussion Boards

Re: My CAsyncSocket class doesn't receive data after some secondes.

Randor 28-Nov-10 5:57

Randor

28-Nov-10 5:57

Hi Stephen,

You have not shown any code so its practically impossible to determine what is causing you grief. All I can recommend at this point is that you learn how to use the visual studio 2005 debugger[^]. It is not as difficult as it seems. My guess is that your application is generating a socket error. You should add a breakpoint in the OnReceive, OnClose and Shutdown functions and check for failures.

I would also recommend that you learn how to use a packet sniffer such as Wireshark[^].

Thanks all I can think of for now.

Good Luck,
-David Delaune

Re: My CAsyncSocket class doesn't receive data after some secondes.

stephen_young28-Nov-10 17:02

stephen_young

28-Nov-10 17:02

Thanx for your reply!I will try it.

Re: [Solved]My CAsyncSocket class doesn't receive data after some secondes.

stephen_young5-Dec-10 17:39

stephen_young

5-Dec-10 17:39

Hi,I found the reason.
In OnReceive,I used a fixed length buffer to call Receive function,But in fact,sometimes the incoming data's length is great than the buffer length.So there was some data remained in system buffer,and the app didnt get them,I think it made OnReceive not be called anymore.
Thanx everybody's advice!!

fatal error LNK1104: can not open file .lib

AmbiguousName26-Nov-10 6:26

AmbiguousName

26-Nov-10 6:26

hello guys...im trying to compile this project but getting this linker error. I have specified all the required include and library files but still it is going into wrong places and showing me the error...here is what is says

LINK : fatal error LNK1104: cannot open file '..\..\..\wrong path\src\debug\file_name.lib

what do I do? Confused | :confused:

thnx

Re: fatal error LNK1104: can not open file .lib

Richard MacCutchan26-Nov-10 6:32

Richard MacCutchan

26-Nov-10 6:32

If that's what it says then it must be looking in that path because of your settings. Check your paths again to make sure you have not inadvertently misplaced one of them.

Just say 'NO' to evaluated arguments for diadic functions! Ash

Re: fatal error LNK1104: can not open file .lib

AmbiguousName26-Nov-10 6:47

AmbiguousName

26-Nov-10 6:47

I have changed the following paths (VS 2008)........

- Project -> Properties -> C/C++ -> General -> Additional Include Directories(req inc files)
- Project -> Properties -> Linker -> General -> Additional Lib Directories(req lib files)
- Project -> Properties -> Input -> Additional Dependencies (req lib file)

- Tools -> Options -> Project n Sol -> VC++ Directories -> Include file (req incl file)
- Tools -> Options -> Project n Sol -> VC++ Directories -> Library file (req lib file)

now where am i missing something? is there any path still needed?

Re: fatal error LNK1104: can not open file .lib

Richard MacCutchan26-Nov-10 7:14

Richard MacCutchan

26-Nov-10 7:14

I think the above is correct, and just the LIB variables are important, Include directories have no bearing on the Linker. If you look at the log files from your build you should be able to see all the directories in the search order. Your original question suggested that you had a bad path in one of the strings so you also may need to check if one of them contains a variable that refers to your "wrong path".

Just say 'NO' to evaluated arguments for diadic functions! Ash

Loading a CBitmap directly from file system without requiring ::LoadBitmap

Ahmed Charfeddine26-Nov-10 5:04

Ahmed Charfeddine

26-Nov-10 5:04

Hi there,
I have to fill CImageList with bitmaps. Each bitmap represent a flag of a country.
To do this one normally adds the bitmap files as resource, then :

CImageList allFlagsList;

CBitmap flagUSA;
flagUSA.LoadBitmap(IDFlagUSA);

allFlagsList.Add(flagUSA);

CBitmap flagFrance;
flagFrance.LoadBitmap(IDFlagFrance);

allFlagsList.Add(flagFrance);

..etc

Of course it becomes tedious to do this for all flags ( actually I already did it but want to refactor it for sake of my code!).
However I can't find a way how to load a bmp image directly into a CBitmap object.
Anyone knows ?

Thanks in advance.

Push Framework - now released !
http://www.pushframework.com

Re: Loading a CBitmap directly from file system without requiring ::LoadBitmap

Richard MacCutchan26-Nov-10 6:29

Richard MacCutchan

26-Nov-10 6:29

I'm not sure I understand your question, but if you are trying to load a bitmap from a file you can use LoadImage()[^].

Just say 'NO' to evaluated arguments for diadic functions! Ash

Re: Loading a CBitmap directly from file system without requiring ::LoadBitmap

Ahmed Charfeddine26-Nov-10 6:45

Ahmed Charfeddine

26-Nov-10 6:45

Thx for your will to help.
That's what I was relying on, but this way I needed to get all flags in the resources which was tedious.
I found this which solves my issue and maybe the one who would encontere the same situation :

http://www.codeguru.com/cpp/g-m/bitmap/article.php/c1707

Push Framework - now released !
http://www.pushframework.com

not recv()'ing everything [modified]

ALLERSLIT26-Nov-10 4:40

ALLERSLIT

26-Nov-10 4:40

Hey guys,
I am trying to fetch the data from here ->
http://74.54.176.106/whois/whois.cgi?domain=127.0.0.1[^]

Though I am not receiving everything, this is all I get:

<HTML&amp;gt;
&amp;lt;HEAD&amp;gt;
&amp;lt;TITLE&amp;gt;Global Whois : whois 127.0.0.1

Tried to google but couldn't find anything that helped me.

my code:

char buffer[4096];
	char strRequest[] = "GET /whois/whois.cgi?domain=127.0.0.1 / HTTP/1.0\r\n\r\n";
	send(sock, strRequest, sizeof(strRequest), 0);
	int i = recv(sock, buffer, sizeof(buffer), 0);

modified on Friday, November 26, 2010 11:49 AM

Re: not recv()'ing everything

Ahmed Charfeddine26-Nov-10 5:37

Ahmed Charfeddine

26-Nov-10 5:37

Please try to correct the "code block" so readers can understand.

You supplied a buffer length that good enough.
However you should note that the socket :recv API does not garantee to you the receipt of all incoming data at once.

You must loop on that function untill either the peer server closes the connection (I think you will get a -1 return value from recv)
or until you know that you received what you "want" ( can only be done if you decode and interpret data at same time ).

Let me suppose that you are talking to a peer webserver, so we know that when all data is sent, the server immediately closes the connection. In that case, your code
should be like this :

char buffer[4096];
int offset = 0;
while ( true )
{
int i = recv(sock, buffer+offset, sizeof(buffer)-offset, 0);
if(i != -1){
offset += i; // increment your offset, so the next chunk of data will be appended to the previously received chunk and not overwrite it
else
break;
}

It is the same thing with the ::send API. You can not garantee that all passed data will be sent. In both cases the system will give you the count of what it managed to process.

Of course you can help avoid these complexities but just using an existing library.

Hope this helps.

Push Framework - now released !
http://www.pushframework.com

Re: not recv()'ing everything [modified]

ALLERSLIT26-Nov-10 5:57

ALLERSLIT

26-Nov-10 5:57

Thanks, I got where you are coming from.
Unfortunately the connection doesnt close, it just sits there.
Tried sending

char strRequest[] = "GET /whois/whois.cgi?domain=127.0.0.1 HTTP/1.0\r\nConnection: Close\r\n\r\n";

but nothing.
Can you suggest me an already existing library that isn't as huge as curlpp or boost, or generally one that is somewhat easy to handle?
I am still new to c++ as you may know.

modified on Friday, November 26, 2010 12:13 PM

Re: not recv()'ing everything

Ahmed Charfeddine26-Nov-10 6:40

Ahmed Charfeddine

26-Nov-10 6:40

Use Poco C++. I used it before eventhough I personaly did not touch the network library of it. (consists of 3 dlls maybe you just need the network one only).
If I remember well there was a class called HttpClient so it will automatize your task.
There are test suites as well so you can figure how things are being used and even take your decision of whether to use the library or not.

http://pocoproject.org/

Push Framework - now released !
http://www.pushframework.com

Re: not recv()'ing everything

Richard MacCutchan26-Nov-10 6:20

Richard MacCutchan

26-Nov-10 6:20

You need to study the rules of sockets. A recv() call will only return the amount of data that is currently available on the socket. You must continue to receive data until you get the end of the transmission (I cannot remember the last piece of an HTTP message, but I'm sure you can Google it). Don't just assume you will get the entire message in one go.

Just say 'NO' to evaluated arguments for diadic functions! Ash

How to detect if the containing popup window is deactivated?

Code-o-mat26-Nov-10 4:32

Code-o-mat

26-Nov-10 4:32

Hello people.

I have a tooltip-like system that shows up information in a popup window based on where the mouse cursor points. Works fine most of the time, but when there's a message box or other modal dialog popping up because of certain events hapening in the background, the tooltip windows just stays on the screen. I guess this is because once the parent window containing the control that has the tooltips is deactivated/disabled (because of the modal dialog), it no longer receives any mouse messages thus the "tooltip" will think that the mouse is still pointing at the given location (since there's no WM_MOUSEMOVE, no WM_MOUSELEAVE...). I used the usual mouse messages (WM_MOUSEMOVE, WM_LBUTTONDOWN...) along with TrackMouseEvent[^] to know when and what to show and hide. But i don't know how to handle the case when we no longer receive any mouse input. One way i guess would be to handle WM_ACTIVATE in the parent window and then channel the event towards the child that has the tooltips but this seems to be quite a non-portable and ugly solution. So anyone knows how to do this right?

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Leela: Fry, you're wasting your life sitting in front of that TV. You need to get out and see the real world.
Fry: But this is HDTV. It's got better resolution than the real world <

Re: How to detect if the containing popup window is deactivated?

Ahmed Charfeddine26-Nov-10 5:22

Ahmed Charfeddine

26-Nov-10 5:22

Hi there,

So what about just intercepting the event of when that parent window gets de-activated because of the pop-up and force to tooltip to disappear ?
You may thus look for WM_ACTIVATE event. Its handler gives a state parameter by which you know if your window is being activated or deactivated, and in the second case it can even give you the address of the "guilty" window (the popups in your case)

Push Framework - now released !
http://www.pushframework.com

Re: How to detect if the containing popup window is deactivated?

Code-o-mat26-Nov-10 5:30

Code-o-mat

26-Nov-10 5:30

As i said, that is one option, it just seems a bit...ugly. Having to do that for every "parent" window everywhere you want to use this tooltip thing isn't convenient.

Re: How to detect if the containing popup window is deactivated?

Ahmed Charfeddine26-Nov-10 5:47

Ahmed Charfeddine

26-Nov-10 5:47

Sorry I looked to your message rapidly, not paying attentio,n to your last sentence.
Well, I do'nt thiink it is too ugly. By the way, you are already calling your tooltip from within the parent frame, in order to achieve things like the tooltip fades away when mouse leaves the control area, no ?

I honestly can't see something else. I had this pbm before with Pustovoy' tooltip when popus are triggered by hyperlinks on the tooltip themselves.

Push Framework - now released !
http://www.pushframework.com

Re: How to detect if the containing popup window is deactivated?

Code-o-mat26-Nov-10 6:04

Code-o-mat

26-Nov-10 6:04

No, i use TrackMouseEvent[^] to detect when the mouse leaves. Guess i'll have to go with the activation "relaying" then. Thanks for your help.

LPSTR or something like that

Krauze26-Nov-10 3:49

Krauze

26-Nov-10 3:49

void getPath(LPSTR lpszPath)
{
    CFile file;
    char pbuf[512];
    ...
    file.Read(pbuf, size);
    // here I wanna copy the first n chars of pbuf into lpszPath
}

So what can I do to manage it?
Maybe what has confused me is the different string data types....

Re: LPSTR or something like that

Ahmed Charfeddine26-Nov-10 5:14

Ahmed Charfeddine

26-Nov-10 5:14

It is the same as if you were dealing with char* !

Have the habit of discovering what the definition of an unknwon type to you is. In this case you'll find it's just made from a typedef !