|
PIEBALDconsult wrote: Like what?
I've read a really good blog about this, but I can't find it now. I'm going by memory.
The first potential (but very minor) benefit happens because of the way the JIT compiler works. If you have the following code
if (x) A(); else B(); then only one of the methods (A or B) with be compiled the first time that it is executed.
With smaller methods there is also a greater chance that CPU registers will be used rather than normal memory.
In addition to this there is the inlining which I have already mentioned. So, in some cases smaller methods can out perform larger methods, and most of the time it's probably hard to tell which will perform best. I always code in a way that is easy to read/maintain because that is what we spend most of our time doing and the performance difference is not worth worrying about 99% of the time.
In addition to this it's also worth remembering how slow other things are. If your code does database queries or uses files then the additional time to call another method really isn't going to make a difference.
|
|
|
|
|
Nope - no question here.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
My latest tip/trick
Visit the Hindi forum here.
|
|
|
|
|
A lot of methods that are only 1 line long can be a little annoying too. Of course if it's a public interface and you want to protect your right to change implementation, then it should still be a method. And there are other good reasons, but just breaking up the code "because you can" isn't a good reason.
You might imagine a large house of 10,000 square feet. If that were just one huge room, the house wouldn't be very usable. If there were appropriate sized rooms, of 100 to 300 square feet each or so, then you have a very usable house. If you have many rooms of only 4 square feet each, then you once again have an unusable house. In other words, break it down to an appropriate level, but no more.
There is a quote supposedly by Pascal that goes something like "I'm sorry this is so long, I didn't have time to make it shorter." Making good methods that are short enough (but not too short) takes time to do correctly.
Yes, reading and maintaining long code (or any code) is a skill. You might want to look at Brownfield Application Development in .NET by Belchem and Baley.
What do you mean when you say your code is "very unique"? All else being equal, being different is not good. All it does is slow people down as they try to read a style they're not used to. So they might find it hard to work with, but if you're doing something good then maybe they should be copying you. My kneejerk response is that you're trying to be too clever. Clever is sometimes good but usually not.
modified on Wednesday, November 17, 2010 9:50 AM
|
|
|
|
|
For a little something I'm experimenting with, I'd like to be able to (binary) read and write various types of object, like I can with C. The biggest need currently is byte, long, and Guid, but I'd like a more general solution.
BinaryReader and -Writer won't do it; they only support a few types (not Guid) and (apparently) not read/write.
So so far I've been working with a FileStream. At this time, I can do byte (which is built into FileStream), and long and Guid via "unsafe" code.
The problem has been in making generic read and write methods:
T Read<T>()
void Write<T>( T Value )
C# doesn't want to make a pointer to a generic type. I got around that (I think) by using a GCHandle, and maybe that's the best I can do.
Anyway... I have a sneaking suspicion that this has been solved before. Shouldn't others have run into the same need?
Does anyone here have information on such a beast?
(If not, I'll write an article when I'm done.)
|
|
|
|
|
I know you don't like Convert class much, however this seems an opportunity for using BitConverter[^] rather than unsafe code.
|
|
|
|
|
Luc Pattyn wrote: I know you don't like Convert class much
Is it that obvious?
I don't see Guid, or DateTime, or other types I may want in the future.
Guid has a ToByteArray method I tried out.
But I also need to convert back from byte array to the type as well.
|
|
|
|
|
|
|
I remember some years ago I tried something similar just for fun. I used reflection recursively to reduce the object to its minimal parts and then writting its binary data was far easy.
For example, Guid data is hold by some private fields: _a (int); _b and _c (short); _d, _e, _f, _g, _h, _i, _j and _k (byte). So, to binary write a Guid I retrieved its private fields (which are of, let's say, simple types) and values through reflecton and then wrote the data to the stream. Deserializing was the reverse process.
Recursion had to be used when the fields were not of simple types.
It was quite tricky (and funny) to develop that, but after making it work I lost interest on it and, unfortunately, I lost the code as well, but maybe this suggestion can help.
|
|
|
|
|
That might be needed for classes and some structs, but I don't plan on going that far at this time.
What I have now works for Guids and I'll exercise it some more today.
|
|
|
|
|
If you are only doing your own data structures and are willing to use unsafe code. Marshal.StructureToPtr will give you that old school C feel. However I think just using binary reader and writer were faster.
|
|
|
|
|
Andy Brummer wrote: binary reader and writer
That's not read and write.
What I have now supports random access, plus:
[PIEBALD.Attributes.EnumDefaultValue((byte)SupportedType.Unknown)]
public enum SupportedType : byte
{
Unknown
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Byte))]
Byte
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.SByte))]
SByte
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Int16))]
Int16
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.UInt16))]
UInt16
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Int32))]
Int32
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.UInt32))]
UInt32
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Int64))]
Int64
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.UInt64))]
UInt64
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Single))]
Single
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Double))]
Double
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Decimal))]
Decimal
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Guid))]
Guid
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Boolean))]
Boolean
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.DateTime))]
DateTime
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Char))]
Char
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.String))]
String
,
[PIEBALD.Attributes.TypeTransmogrifierAttribute(typeof(System.Enum))]
Enum
}
Oh, and if the type is unknown, it tries the GCHandle technique anyway -- which works for some other types.
modified on Sunday, November 7, 2010 10:54 AM
|
|
|
|
|
I am writting a code in vb.net, How can i convert it into the similar code in c#?
|
|
|
|
|
you are new here, and should read the forum guidelines; see "how to get an answer" on this page.
"help needed" is not informative. That is a reason why your earlier posts got down-voted.
why do you write in VB.NET if you need C#? do you know C# at all? if not, forget it (i.e. study it thoroughly or don't use it at all).
there are converters, some big, good, expensive; and some small and free, like this one[^].
|
|
|
|
|
you must learn C#, there is no other solution to your problem!
|
|
|
|
|
Isn't there? What about the automatic code converters? How do you think that Reflector works?
|
|
|
|
|
Reflector decompiles an assembly to .net language C# or VB.net or MSIL,
and the "there is no solution" means "to encourage him to learn c#" 
|
|
|
|
|
Then that's what you should say to the OP. As he's inexperienced, he may just take you at your word.
|
|
|
|
|
|
See the below links
http://www.developerfusion.com/tools/convert/vb-to-csharp/
http://www.dotnetspider.com/convert/Vb-To-Csharp.aspx
these are the online tools for convert code Vb.Net to C#.
|
|
|
|
|
If you are using VS2008, you can download the MoXAML PowerToys referred to in my sig, and run the BabelCode functionality there to convert from C# to VB.NET or vice versa.
|
|
|
|
|
|
Hi All!
In C# ,VS2010 :
Let's say I assign a tag-property for a TreeNode-object with an IShellFolder-object. What do VS really store in the Tag-property? Do the framework hide all the gruesome memoryhandling for me and internally just store a pointer to the IShellFolder-object, or do the memoryuse just increase the further I recurse into the Folder-tree?
I have been programming for some years, but have no formal education on computing, except for some MCP-courses.
Someone knows what I should read or some good sources for explaining this?
TIA, Load_error
------
On Error Goto Hell
|
|
|
|
|
IMO you should learn a language, or any new technology, from a book you buy and study; and study again one year later. Memory management is pretty automatic in .NET
|
|
|
|
|
Well, to reduce the memory-footprint is not just a matter of reading, it is (together with memory-leaking and multithreading) some of the stuff I find most difficult to debug (like the half-assed CLR-implementation GC, what does it really collect?!? What should I release with Marshalling, etc ?!?).
Desktop developers have got a christmaspresent from MS every time they release a new OS, like they think "how to break any existing code" every time...
I started out in the VB3 days (Win95 / -stuff), and seem to re-create libraries for (almost) the same things over and over again.
Your answer did not help much, either...
Regards, Load_error
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
