|
There is one very large inefficiency in there: Every time around the loop you convert the whole buffer to utf8, and then extract a substring from it.
So, the first time, you read 100 bytes, convert 100 bytes, and then extract 100 bytes into a string.
The second time, you read 100 bytes, convert 200 bytes, and then extract 100 bytes into a string.
The third time, you read 100 bytes, convert 300 bytes, and then extract 100 bytes into a string.
...
Then you do a comparison to check if the whole 100 bytes you read in are "xref" - a four byte string. I think I can guarantee it will only work if the last four bytes in your file are 'x', 'r', 'e' and 'f' in that order...
Did you know:
That by counting the rings on a tree trunk, you can tell how many other trees it has slept with.
|
|
|
|
|
By The Way:
1) If it's at the end of the file, why do you start reading from the beginning?
2) What if it is in two blocks ("xr" at the end of one, "ef" at the start of the next)?
Did you know:
That by counting the rings on a tree trunk, you can tell how many other trees it has slept with.
|
|
|
|
|
Statements such as offset = Convert.ToInt32(length) - count; are incorrect; why are you trying to convert integers to integers?
I am also assuming that you are still trying to work on a PDF file, in which case you should use the PDF reference document and read the dictionaries (from the end of the file) and address the individual items via the use of structures.
It's time for a new signature.
|
|
|
|
|
Hi Richard,
Thanks for answering.
The FileStream.Length is of type long... hence the convert.
So at my speed (baby steps) I now have the code to find the menu (a.k.a. the cross reference table or xref) at the end of the file. For now I'll work with the scenario that its not a stream. I am still reading the PDF Reference.. its a long document!
I want to learn about the PDF format hence my project is to write an application that can replace text or iamges in a PDF. I doubt I'll ever succeed, honestly, since its a humongous task. On the plus side I'll learn a lot by simply trying 
Thanks again for the advices, its really appreciated.
Antoine
|
|
|
|
|
Alright. In Outlook, if I want to arrange my tasks by categories, I can go View-Arrange By-Categories.
My question is, is there anyway to do this programatically?
Thanks a bundle
|
|
|
|
|
I am using BarTender[^] software.
And try to print barcodes from DB.
I am able to fetch data from DB with sql query.
But when i try to use Stored Procedure its giving error like
BarTender: error message #3239
OLEDB has encountered error 0x800ade78
Operation is not allowed when the object is closed.
But when i use sql query its running ok.
also i tried with SP having single select query.
Its running also ok.
But when i give SP (performing some operations in it) then its giving error.
Plz, Can any one help/guide me.
Whats the issue in this?
Regards
|
|
|
|
|
It's normal practice, when having a problem with vendor specific software, to post the question on the forum for that software or email it to the company in question. They will be much better placed to offer advice to you than we possibly could, what with our not knowing this software. I will say though, that the error message looks funnily like you attempting to issue a SQL command on a closed connection, but that's just me reading the error text you posted. I couldn't honestly expect you to have done the same.
"WPF has many lovers. It's a veritable porn star!" - Josh Smith As Braveheart once said, "You can take our freedom but you'll never take our Hobnobs!" - Martin Hughes.
My blog | My articles | MoXAML PowerToys | Onyx
|
|
|
|
|
Pete O'Hanlon wrote: post the question on the forum for that software or email it to the company in question
I did that, and mailed on id they had provided on their site.
Pete O'Hanlon wrote: the error message looks funnily like you attempting to issue a SQL command on a closed connection
Any one who know English will say what you had...!!
But its like this, its giving an error like this.
But i couldn't understand, if i use single select statement its running
But the actual procedure i need to call, creates a temp table , insert data in it and then drop this table.
its giving error in this?
|
|
|
|
|
Hum Dum wrote: But its like this, its giving an error like this.
But i couldn't understand, if i use single select statement its running
But the actual procedure i need to call, creates a temp table , insert data in it and then drop this table.
This is why they are better placed to solve this than we are. How on earth do you expect us to know what it's doing internally? I would expect that it's expecting a query and you are supplying it with DML and that's causing it to bork. Again - they will know the answer.
"WPF has many lovers. It's a veritable porn star!" - Josh Smith As Braveheart once said, "You can take our freedom but you'll never take our Hobnobs!" - Martin Hughes.
My blog | My articles | MoXAML PowerToys | Onyx
|
|
|
|
|
1) You are talking about an error with a third party application.
2) You have not provided any code.
It will be tough for anyone to help you in those circumstances.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
|
|
|
|
|
string SQL = "SELECT `Calories` FROM `NutritionInformation`";
Engine btEngine = new Engine();
LabelFormatDocument btFormat = btEngine.Documents.Open(@"C:\NutritionLabel.btw");
((OLEDB)btFormat.DatabaseConnections[0]).SQLStatement = SQL;
Well above is part of code. Which i used mentioned at their SDK help file.
I am replacing the SQL with sql i want to use - Working
I am just mentioning SP name in SQL (Sp contain only single Select) - Working
But when i call SP which i had to use actually, its giving error.
For above code to work you have to download their SDK and install it, then add reference to Seagull.BarTender.Print.
|
|
|
|
|
Well - you could try searching for a similar problem on their forums.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's too late to stop reading it.
|
|
|
|
|
This is a complete guess as I have never even heard of that product before but do you have the correct permissions to connect and run a stored procedure? Sorry if that is complete bollocks but worth a try.
"If you think it's expensive to hire a professional to do the job, wait until you hire an amateur." Red Adair.
nils illegitimus carborundum
me, me, me
|
|
|
|
|
Hallo
I'd need to write into a textbox of an external application.
Investigating with Spy++ I found that its controlID changes: the only thing helping to identify it unequivocally is the Class attribute: it is the only control of that Class in that form.
How could I address the textbox by this value?
Could you post a snippet?
Thanks in advance
|
|
|
|
|
the search is your best friend
try searching like TextBox Text Win32Api
|
|
|
|
|
thank you for the reply, I previously did a search and adapted a snippet found on Stackoverflow.com, but it (and many other examples in the net) shows how to address controls by their handle.
In this case, I have a control contained into a modal window addressable by portion of its name (the only part that doesn't change).
|
|
|
|
|
I guess that would be done using the FindWindowEx[^] function. At least, that way you could retrieve the current handle.
I are Troll 
|
|
|
|
|
I have two tables: table1 field contains the ID type UniqueIdentifier and table2 contains ID as foreign key when inserting values is not the same values filled in the two table table1 in this ID is filled eg e210d5ad-BC41-439th-b8e8-e8ed775ee932, and in table 2 it is filled with zero
So how do I do to unify all relationships necessary is active
the two queries are:
CREATE Procedure [dbo].[Insert1](@ID uniqueidentifier, @name varchar(10),@tel varchar(10))AS INSERT INTO [table1] ([ID], [name], [tel])VALUES (NEWID(), @name, @tel)
CREATE Procedure [dbo].[Insert2](@ID uniqueidentifier, @cmd1 varchar(20))AS INSERT INTO [Table2] ([ID], [cmd1])VALUES (@ID, @cmd1)
table1: ID Primary key
Table2:ID foreign Key
Thank you very much for your help
|
|
|
|
|
You don't need procedures for this, but if you do, why not have both statements in one procedure?
With SQL Server, even when using SQL in your code, you can have both statements in one command.
But the important thing is to generate the Guid in code (don't use NEWID() in this case), before executing the SQL. Something along the lines of:
System.Guid ID = System.Guid.NewGuid() ;
cmd1.Paramaters [ "@ID" ].Value = ID ;
cmd2.Parameters [ "@ID" ].Value = ID ;
Knowing the ID before hitting the database is one of the benefits of using Guids as keys.
|
|
|
|
|
thank you very much, it works very well, I have not used newid() in the stored procedure, and I put in the code GUID.NewGuid (), thank you again
|
|
|
|
|
Please post your questions to one forum only!
You posted this very question just a few minutes earlier to the General Database forum...
|
|
|
|
|
I am developing a small image editing program and the output is in a compress tiff file.my program runs well in my workstation which is win7 but when i try to run my program in winXP,it throws an exception "paramater is not valid".the exception is caused by my compression that am using,which is CCITT4.is there any other way to make CCITT4 work in winXP? thanks a million guys...
|
|
|
|
|
The first thing you should do is read the posting guidlines above in "How to get an answer to your question[^]" in regard to your subject. Everyone posting a question is here for help, the fact that it's urgent for you is irrelevant and writing in upper case is SHOUTING and considered very rude.
If you edit your subject then you are far more likely to get useful, timely responses.
DaveIf this helped, please vote & accept answer!
Binging is like googling, it just feels dirtier.
Please take your VB.NET out of our nice case sensitive forum.(Pete O'Hanlon)
BTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
|
|
|
|
|
am sorry abnout that...my deepest apology...
|
|
|
|
|
Hi i have created a generic collection . I have My custom class.
When i am adding objs of my custom class in the collection .I am not able to
Search remove from the collection even i contains() method is not working .Can u plz Tell me where i am wrong. Or How should i do this.
public class GCommon<T> : Collection<T> where T : ICommonInterface
{
new public void Add(T item)
{
if(!base.Contains(item))
base.Add(item);
}
public void Clear(T item)
{
foreach (T it in base.Items)
{
if(it.Equals(item))
base.Remove(item);
}
}
new public bool Contains(T item)
{
bool retval = false;
foreach (T itm in base.Items)
if (itm.Equals(item))
{
retval = true;
break;
}
return retval;
}
}
public interface ICommonInterface
{
}
public class clsContent : ICommonInterface
{
public clsContent()
{
}
public clsContent(int id,string Name, string Content)
{
_Id = id;
_ContentName = Name;
_Content = Content;
}
private int _Id;
public int Id
{
get { return _Id; }
set { _Id = value; }
}
private string _ContentName;
public string ContentName
{
get { return _ContentName; }
set { _ContentName = value; }
}
private string _Content;
public string Content
{
get { return _Content; }
set { _Content = value; }
}
}
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
