|
Sorry, but I have not used this myself. If your assembly code is output in source form then you could possibly pass it through the MASM assembler to create an executable file.
Other than that I can only suggest you try Google for further suggestions.
|
|
|
|
|
Hi,
I have used PL/M once, some 30 years ago, and haven't seen any of it ever since. I consider it dead and buried. My suggestion is you move away from it, towards a recent language. Getting PL/M alive again is probably a bigger and less rewarding effort than rewriting some existing code once.
If the target environment is a modern PC, I suggest one of the .NET languages, such as C#.
If the target is some embedded system, I would stick to C or maybe C++.
Luc Pattyn [Forum Guidelines] [My Articles]
I only read code that is properly indented, and rendered in a non-proportional font; hint: use PRE tags in forum messages
|
|
|
|
|
I have to use PL/M (boundation).
How u run ur PL/M code 30 year before.
After that any new IDE or at least any emulator is desinged for developers or not U Know any thing about it.
---------------------------------------------------------------------------------
I m updating my previous reply pls see this also.U got better understanding about what I require actually.
Thanks for reply....
|
|
|
|
|
Hi,
I want to make USB as a CDFS format. Any idea will help.
Thanks
SNI
|
|
|
|
|
Hi, one of my colleague just purchase Canon FS100[^]. He recored many move in it and he could play all of that file which run continous between each other without pause period. He could run like this in the camcorder and in TV.
But in PCs, he could not do that. He could only play one file and after finish he need to double click the other file. He do not want to do that, he want to play all of it like he play in the tv or camcorder.
The CD came with this camcorder is Canon Digital Video solution disk and ImageMixer 3 SE for SD. I also try in both of the software in this CD but i could not find the play all option.
Does anyone know is it possible for me to play all of the movie in the camcorder? If it is possible, how could i do that...?
Thank in advance!!!
|
|
|
|
|
What type of files are they? If they are viewed through Windows Media Player then they can all be added to the playlist and then enable the repeat. It would then loop the videos.
Reading the information about the specific camera, the video format is a MOD is that correct? If this is the case then Windows Media Player Classic might need to be used and if I am not mistaken you can still create a playlist with that. Might want to try VLC
|
|
|
|
|
Hi, does anyone know about intel atom? does it fast as the other intel cpu or not?
Thank in advance!!!
|
|
|
|
|
It's slower than any other current intel processors because it was designed for low power and low cost. A mobile atom has a 5W TDP, vs 35 for a normal laptop chip (25 or 10W for the more expensive low power models). The desktop chip runs at 10W vs 35 for a celeron or 65+ for a normal desktop CPU.
It's fast enough to surf the web; but don't plan on gaming or doing video encoding type work on it.
3x12=36
2x12=24
1x12=12
0x12=18
|
|
|
|
|
Many people have found it difficult to rip DVD to iPod Touch/Classic/Nano, Convert Video to iPod Touch/Classic/Nano, Convert Protected Videos/Music to iPod Touch/Classic/ Nano. This guide will solve these problems.
It include two parts:
Part 1: How to Convert DVD to iPod Touch/Classic/Nano
Part 2: How to Convert Video to iPod Touch/Classic/Nano
Part 1: How to Convert DVD to iPod Touch/Classic/Nano
Step 1. Download the Cucusoft DVD to iPod + iPod Video Converter Suiteinstall and run it.
http://www.5idownload.com/img/guide-cu-ipod-video-converter-suite1.jpg
Step 2.Click DVD to ipod Converter component, you will see the UI.
http://www.5idownload.com/img/guide-cu-dvd-ipod1.gif
Step 3. Open Cucusoft DVD to iPod Converter. Choose the profile (output format), encode speed, and set the output folder.
You need to set the output folder to your hard disk.
Step 4.Insert DVD to DVD-ROM
Click "Open DVD" button on the skin or choose "menu>file->open dvd "
Step 5. Set the Basic Input setting Audio track, Subtitle on the menu of the preview screen. Move the start to the position you expected.
Play the title you want to record, it will pop up the following window, choose "record from movie start point" and output file size
http://www.5idownload.com/img/guide-cu-dvd-ipod2.gif
Step 6.If you have not start recording the dvd at step3, you also can click "record" button to record when the movie playing to the place you expected
Part 2: How to Convert Video to iPod Touch/Classic/Nano
Step 1. Download the Cucusoft DVD to iPod + iPod Video Converter Suite, install and run it.
http://www.5idownload.com/img/guide-cu-ipod-video-converter-suite2.jpg
Step 2. Run [url=http://www.5idownload.com/cu-Video-iPod.html]iPod Video converter [/url]component. And load the video files you'd like to convert by clicking 'Open file' button.
http://www.5idownload.com/img/guide-cu-ipod-video-converter-suite3.jpg
Click 'Output' and choose the pathname where you want to save your video files. Click 'Convert' to start converting video to iPod MP4 or H264 files.
http://www.5idownload.com/img/guide-cu-ipod-video-converter-suite4.jpg
Step 3. After converting, you can open the output folder to check and play the iPod video files (.mp4 or .mov) using Quicktime Player (Freeware, Quicktime Player+iTunes downloading address Apple - QuickTime - Download ).
Step 4. Transfer the iPod videos to iTunes by draging or clicking "File -> Add File to Library".
|
|
|
|
|
Do not post advertising in these forums.
|
|
|
|
|
I have been working on an electronics project, and I want to post it somewhere in a format similar to the articles here at Code Project. The project essentially shows how to design memory circuits for the Motorola 6800 series of CPU (6809, 6502, etc.)
My work used a Heathkit ET-3400, which is a rudimentary computer that exposes its key circuits on a breadboard. This thing is almost 30 years old, but it still fairly widespread on e-Bay, at colleges, etc. I got mine off e-Bay for about $70 quite recently.
My educational background is in Computer Science, and in writing the article I would assume that same educational background in my readers. I also have some software-related articles involving the 6800 and the ET-3400 which I could post as a sequel. So, I initially considered posting this memory project here.
However, in searching article categories, I get the sense that Code Project articles as a whole reside at a very high level of abstraction. Even in the "Systems" categories, I don't find much machine language, assembly language, or even C.
This high-level focus would, I think, make my article seem out-of-place here. So, does anyone know of a similar site for computer / electronics engineering?
Also, I was a bit surprised at the results of my article searching. This is a "code" site, to be sure, but must that mean user-mode, auto-garbage-collected software only? Is there not a "code" a site where one might see analogous articles for C and assembly language? If not, why isn't anyone at all interested in doing this sort of thing on a not-for-profit basis?
It seems that there is a profusion of high-level application software being coded in the public domain, and I feel that the worlds of system programming and computer engineering ought to have something similar.
|
|
|
|
|
Hi,
I don't know of any electronics or low-level software site, similar to CodeProject. I guess nobody would mind you publishing such articles around here, however the audience probably would be very limited.
I have been using 6800, 6502, and many more, myself; one of my first achievements was upgrading a Motorola 6800 demo board to a 6809 (it had 256 bytes of RAM, not MB or GB!); I also implemented a simple Basic interpreter for another 6809 board (with a whopping 64KB), and much more. All of this is indeed 30 years ago, I wasn't aware those chips still are of interest to anyone. I have since developed a fully automated model railroad track (with 2 Macs, several Microchips, and C; I should port it to PC and .NET as those Macs are getting really old by now); I also have developed dozens of microprocessor cross-assemblers and simulators, some in Fortran, a lot in C, and the latest ones in C#. So I probably would be reading (and commenting on) the articles you might write, if and when I see them.
Cheers.
Luc Pattyn [Forum Guidelines] [My Articles]
I only read code that is properly indented, and rendered in a non-proportional font; hint: use PRE tags in forum messages
|
|
|
|
|
I may still post my project here. It does eventually lead to a compiler and an associated app framework. The language is a purely functional, applicative-order language like Scheme, and the framework supports half- and single-precision real-number data types. Most of this - including the master copy of the framework- is written in C. For the framework, this is "if-then-goto" type C which is designed to be hand-assembled onto any platform and emitted by the compilers. Parts of this have been ported to the ET-3400, Microchip PICKits, and the Tandy Color Computer II.
Also: Do you mean that you used Microchip "PIC" chips in your railroad project? Those have been another big area-of-interest for me. It is very easy and cheap to program a PIC chip these days. And I was surprised at how well my language and library worked with the PIC (which is not considered very compiler-friendly). For example, for the 16-series PIC, the stack is limited to seven return addresses. But in a compiler with tail recursion optimization, it is possible to calculate things like 33 factorial, which conceptually have well more than 7 nested function calls. I like this!
Also, if anyone thinks that all of this is a colossal waste of time, then please let me know. I did not realize that people were doing basically the same thing 30+ years ago. Maybe that should be a wake-up call...?
|
|
|
|
|
Yes, I designed a network with some five nodes, each node has a PIC 16F84 (it was one of the first flash devices, has 1K instructions, no serial port) and controls 32 digital power outputs (points and signals) and 32 digital inputs (hall sensors). They are networked with a simplified CAN protocol, and two of them use RS232C to interface to the Macs. It was all programmed in assembly, without using interrupts (cannot afford to loose that latency time!), with a cooperative reschedule every 64 cycles.
Member 3680785 wrote: a colossal waste of time
that is for you to decide; is it an interesting pass time? (yes) is it economically or otherwise justified? (no) If you plan on writing some articles anyhow, then you could easily publish them here (or here and elsewhere). Even if you have your own web site, CP still is a good place as it gets thoroughly scanned by Google's and other bots.
Luc Pattyn [Forum Guidelines] [My Articles]
I only read code that is properly indented, and rendered in a non-proportional font; hint: use PRE tags in forum messages
|
|
|
|
|
Hi,
Member 3680785 wrote: I have been working on an electronics project, and I want to post it somewhere in a format similar to the articles here at Code Project.
If you are looking for other engineers working with the 8-bit microcontroller architecture the I would recommend the Microchip forums[^]. I recently completed an underwater ROV project related to acoustic tracking/positioning. Some of the members at that forum are extremely helpful... especially for people like me lacking an electronic background.
Member 3680785 wrote: I also have some software-related articles involving the 6800 and the ET-3400 which I could post as a sequel. So, I initially considered posting this memory project here.
I would be very interested in having a look at your project. The Motorola 680x0 assembly instructions are much simpler than Intel x86. Its a great starting point for students and/or hobbyists interested in assembly. It is my opinion that CS students should be required to learn 8-bit assembly first.
Member 3680785 wrote: It seems that there is a profusion of high-level application software being coded in the public domain, and I feel that the worlds of system programming and computer engineering ought to have something similar.
I agree. We went to the moon with the 16-bit Apollo Guidance Computer[^] at 2 Mhz. Soon we will need a terahertz processor just to boot into our BloatOS™ and open a word processor.
Welcome to codeproject,
-David Delaune
|
|
|
|
|
Agreed about the Microchip forums... those guys are really helpful, and willing to give advice, even to a "noob." That is a big deal for me.
I have been asked why I don't use the "Atmel AVR" chip, which does many of the same things as the PICs, but supposedly with a more modern, less awkward architecture. A big part of the reason I avoid Atmel is that I've been really turned off by the attitude that their proponents seem to have... it's almost a religious anti-PIC zeal. Using a PIC, on the other hand, there are a wealth of application notes, starter kits, etc. available to ease the learning process...
Since there seems to be no big objection, I probably will post my article(s) here. If I post articles for all my PIC, CoCo, and ET-3400 projects, then taken together these would form a kind of "Computer Engineering for Programmers" course.
What I would really like to see eventually is an open-source, grass-roots effort to build a clean sheet alternative to Wintel, and the Internet. There's too much rotten wood in the current system. The Intel instruction set and Unicode are the two examples that pop to mind. When do we ever get a real "version 2.0?" Never??
|
|
|
|
|
I am an Electronics Engineer who gets lumbered with Windows programming as I am the only one who has a software skill set. Serial Ports are my Friends! I for one am very interested in any (& all) articles which deal with hardware and interfacing in general. Having been at one company who used Atmel and have joined one that is a Microchip advocate I can say that Atmel AVR is more modern but will get in the way of some dirty tricks you can pull with Microchip (MPLAB). I have found the only place that will aid 'Hardies' with an answer to questions quickly tends to be MSDN and I have found C# Friends, www.debugging.com/bugs. Also any news of Levent Saltuklaroglu(?) author of I/O Ports Unsensored. Seem quite a friendly guy who knew what I and by the sound others need to know!
Glenn
|
|
|
|
|
OK- I have written about 15 pages complete with diagrams, and I doubt I am even 50% done. So, I think this is too much, and am considering a change in strategy.
Currently, my article is broad. It has a basic explanation of the formats I use to present data, i.e. electronic schematics and the "rat's nest" diagram. There are passages of text and graphics devoted to explaining DC circuits, transistor-based logic, and so on. I can see this developing into a fairly valuable 40-page summary of "Computer Engineering for Computer Programmers," but (knowing quite a few programmers) I am not sure this will be considered exciting. I do not want to post anything that will attract "1" votes.
I have also considered making a purposeful effort to re-frame the article along the lines of a "Minimalist DMA Example." This might even entail modifications to the circuits presented. I can envision ways to replace transistors with pull-down resistors. This would achieve the same result but with a loss of generality, extensibility, etc. This could be posted here, or in another forum, but in any case the overall thrust of the article would be different.
There is a Yahoo group for ET-3400, I am considering posting there as well. The main obstacle is that I am less familiar with the format.
|
|
|
|
|
Hi Beau,
I have looked over your DMA project document and it looks like a very interesting hobby project. I looked on ebay and found a Heathkit ET-3400 for about $40 bucks. Thats a great deal in my opinion. I have seen bread-board and 'Starter-Kit' packages at twice the cost.
Good luck with your project.
Btw looks like someone down-voted your comment. I will up-vote your comment to negate the negative value.
Best Wishes,
-David Delaune
|
|
|
|
|
Hi, which black/white and color laser printer that is good for doing business?
|
|
|
|
|
Mekong River wrote: which black/white and color laser printer that is good for doing business?
This depends entirely on your business needs, and there are far too many to choose from to give a definitive answer. The best place to look is some of the product and price comparison web sites to find the product that offers the best options for you.
|
|
|
|
|
Hi, is it true that the second hand printer consume more eletricity power than the new printer (the same printer model)?
Thank,
|
|
|
|
|
It's impossible to tell, the consumption of electricity is based on the usage rather than the age of the device, although worn mechanical interfaces might have an effect.
|
|
|
|
|
No, that's not true, at least not to any significant extent. In comparing new and used printers, I would consider such things as lifespan, likelihood of failure, maintenance cost, etc. But the difference in power consumption will be negligible.
|
|
|
|
|
I've been looking for a way to do this, but all I can find are ways to do this using the driver install wizard that pops up when you attach a PnP-device.
My problem is this: I have drivers for a USB device that I want to install silently. When the user attaches the device, it should just work. I am working with Windows Embedded Standard, which is an XP derivative.
Just right clicking the INF-file in an explorer window and selecting the "Install" verb just doesn't do it.
This shouldn't be hard to accomplish at all. I mean, USB mice and keyboards are installed on the fly, because Windows has been prepped with drivers for them. What's the silver bullet? 
--
Kein Mitleid Für Die Mehrheit
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
