C / C++ / MFC

Re: Dialog with custom control won't work with satellite DLL

24-Aug-09 1:15

I use satellite DLL for localization purposes in my application. And loading the dll with AfxSetResourceHandle. This works fine for all of my dialogs that doesn't use a custom control.

For those with custom control the constructor is called but not OnInitDialog or DoDataExchange
And DoModal returns -1

Any suggestion?

Thanks.

Code-o-mat24-Aug-09 1:45

Re: Dialog with custom control won't work with satellite DLL

24-Aug-09 1:45

The system probably cannot create the custom control on your dialog. The custom control has to be registered before you can try to create a dialog which contains it, otherwise when the system gets to the custom control (when loading the resource and creating the dialog from it) and checks its class it won't find it among the known control/window classes and thus fail to create it which leads to the whole dialog creation process' fail.
Also check if you specified the right window class name in the resource editor for your custom control, if you forgot to do it or if you made a typo then you get the same result as above.

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Per G24-Aug-09 22:59

Re: Dialog with custom control won't work with satellite DLL

24-Aug-09 22:59

Ok, checked the window class name and it's not misspelled

But how do I check if my custom control is registered, I just know that if I place it "normal" resourcefile - not in the satellite file everything works fine

Code-o-mat24-Aug-09 23:15

Re: Dialog with custom control won't work with satellite DLL

24-Aug-09 23:15

So you say that if you have the same custom control in a resource inside a DLL, and you load the resource from the DLL and try to create the dialog, it fails, but if you have the very same resource in the exe, not in an external DLL, without otherwise changing anything on your code, it works? You said other dialogs which do not have the custom control on them work fine, you load these from the DLL too?

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Per G24-Aug-09 23:23

Re: Dialog with custom control won't work with satellite DLL

24-Aug-09 23:23

Yes that is correct and other dialogs in the satellite DLL works fine as long isn't any custom controls in it. I have also tried with an other custom control and I got the same result.

Code-o-mat24-Aug-09 23:32

Re: Dialog with custom control won't work with satellite DLL

24-Aug-09 23:32

Call GetLastError[^] after your DoModal returned (with -1) and see the System Error codes[^]. Which error does it report? Also another question, how/where do you register your custom control?

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Per G26-Aug-09 20:41

Re: Dialog with custom control won't work with satellite DLL

26-Aug-09 20:41

// App command to run the dialog<br />
void CMultiLangApp::OnAppAbout()<br />
{<br />
        CAboutDlg aboutDlg;<br />
        aboutDlg.DoModal(); // calling CDialog::DoModal()<br />
}<br />
 <br />
 <br />
// the fucntioncalls to the error<br />
INT_PTR CDialog::DoModal()<br />
{<br />
        &<br />
        &<br />
        &<br />
        if (CreateDlgIndirect(lpDialogTemplate, CWnd::FromHandle(hWndParent), hInst)) // calling CWnd::CreateDlgIndirect<br />
}<br />
 <br />
 <br />
BOOL CWnd::CreateDlgIndirect(LPCDLGTEMPLATE lpDialogTemplate,<br />
        CWnd* pParentWnd, HINSTANCE hInst)<br />
{<br />
        &<br />
        &<br />
        &<br />
        hWnd = ::CreateDialogIndirect(hInst, lpDialogTemplate,<br />
                pParentWnd->GetSafeHwnd(), AfxDlgProc);<br />
// returns NULL and The GetLastError() is 0 after CreateDialogIndirect.<br />
}

The registration of my custom control is done in the the constructor in the control class by calling RegisterWindowClass

Code-o-mat26-Aug-09 22:15

Re: Dialog with custom control won't work with satellite DLL

26-Aug-09 22:15

When you register your custom control, using the WNDCLASS[^] or WNDCLASSEX[^] structures, for the hInstance member, do you specify an instance handle of your application? If yes, try giving it the DLL's handle instead and see if it changes anything. You still didn't tell me what GetLAstError() gives you.

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Per G26-Aug-09 22:37

Re: Dialog with custom control won't work with satellite DLL

26-Aug-09 22:37

The call to returns NULL and The GetLastError() is 0 after CreateDialogIndirect. as shown below

hWnd = ::CreateDialogIndirect(hInst, lpDialogTemplate, pParentWnd->GetSafeHwnd(), AfxDlgProc);<br />

Well I register my custom control using WNDCLASS and a specify the hInstance, by calling AfxGetInstanceHandle but I don't know how to change it to point to the DLL.

WNDCLASS wndcls;<br />
  HINSTANCE hInst = AfxGetInstanceHandle();<br />
<br />
  if (!(::GetClassInfo(hInst, BITMAPVIEWER_CLASSNAME, &wndcls)))<br />
  {<br />
     // otherwise we need to register a new class<br />
     wndcls.style            = CS_DBLCLKS | CS_HREDRAW | CS_VREDRAW;<br />
     wndcls.lpfnWndProc      = ::DefWindowProc;<br />
     wndcls.cbClsExtra       = wndcls.cbWndExtra = 0;<br />
     wndcls.hInstance        = hInst;<br />
     wndcls.hIcon            = NULL;<br />
     wndcls.hCursor          = AfxGetApp()->LoadStandardCursor(IDC_ARROW);<br />
     wndcls.hbrBackground    = (HBRUSH) (COLOR_3DFACE + 1);<br />
     wndcls.lpszMenuName     = NULL;<br />
     wndcls.lpszClassName    = BITMAPVIEWER_CLASSNAME;<br />
     if (!AfxRegisterClass(&wndcls))<br />
     {<br />
         AfxThrowResourceException();<br />
         return FALSE;<br />
     }<br />
  }<br />
<br />
return TRUE;

Code-o-mat26-Aug-09 22:49

Re: Dialog with custom control won't work with satellite DLL

26-Aug-09 22:49

Try with GetModuleHandle("your_dlls_name.dll"); maybe.

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Per G26-Aug-09 22:55

Re: Dialog with custom control won't work with satellite DLL

26-Aug-09 22:55

yes, seams to do the work fine.
But I will do a larger test later to day, so I'm 100% sure it works.

Thanks, this has been bugging by for very long time now

Per G26-Aug-09 23:14

Re: Dialog with custom control won't work with satellite DLL

26-Aug-09 23:14

okey, runned new check and it still works
thanks again

Code-o-mat26-Aug-09 23:21

26-Aug-09 23:21

Glad i could help, but i am not sure how safe this solution is...i am not sure what exactly the hInstance is used for when you register a custom control, i guess it is used by the system to automatically unregister window classes when the module that contains their implementation gets unloaded, if it is so, then as long as your DLL is in memory while your program runs you should not run into any troubles, however i do not know when that DLL will get unloaded, if you still have such custom controls hanging around windows when your DLL is unloaded you probably will run into problems...or i am just being too cautious about it. Anyways, good luck.

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Advance tolpic in vc6

hrishiS24-Aug-09 1:05

hrishiS

24-Aug-09 1:05

Hi to all,

I am a new learner in visual C++ 6.....I knew C++ language, and now i learnt visual studio editor also....just what is enough to debug and run the project...

Now i am having free time and I would like to learn more...I want to be a good vc6 programmer.
Could anyone please suggest some topics(may be related to project design, C++ Concept or anything in VS6 editor that one should know) to me so that I can go through.

Thanks in advance.

-----------------------------
I am a beginner

Aabid24-Aug-09 2:02

Aabid

24-Aug-09 2:02

your problem is too brief can u explain it little more... what type of programs you want to make in VC++6.

hrishiS24-Aug-09 3:33

hrishiS

24-Aug-09 3:33

right now am working on console based application only....

-----------------------------
I am a beginner

David Crow24-Aug-09 3:15

David Crow

24-Aug-09 3:15

It sounds as though you are interested in making GUI applications. Is that correct?

hrishiS24-Aug-09 3:35

hrishiS

24-Aug-09 3:35

i have work in win32 console base application project...also i tried GUI(MFC) of my own....i mean i have very basics of MFC.....so it will be great if u send some topic in console based application...mFC also would be additional knowledge for me

-----------------------------
I am a beginner